544779
4
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
INSTALLATION
1. Install inverter in a cool, dry and well ventilated area away from any inflammable material.
2. Ensure the DC power cables are as short as possible (<2m) and of suitable size to handle the current
required. This is to minimise any voltage drop when the inverter draws high currents. Remember solid,
secure, clean connections are essential for optimum performance. It is better to use an extension lead in
the 230V circuit than in the 12V circuit.
3. Ground the inverter whenever possible.
Operation
Connect the inverter to the battery (red is positive, black is negative). Make sure that all connections are of
good quality. Switch the inverter on first and the unit to be powered afterwards. Switch off in reverse order.
To operate units with a high start voltage, it might be necessary to switch the unit several times on and off.
Wait a few seconds between every switching.
Protection
All SkyTronic inverters are protected against thermal overload, peak currents and short circuit. This ensures
the unit won’t be damaged when something happens. The unit will switch off automatically to protect the
internal parts.
To prevent switching off, always check if the cooling fan isn’t obstructed, if there is sufficient airflow around
the unit and if it’s connected to the right DC input voltage.
Fuse replacement
ALWAYS disconnect this unit from its power supply before attempting to replace the fuse. Remove the old
fuse from the holder and replace with a fuse with the exact same power rating. Replacement with anything
other than the exact same fuse might cause damage to this unit.
FREQUENTLY ASKED QUESTIONS AND ANSWERS
Measuring AC voltages:
The output wave of the AC inverter is a MODIFIED SINEWAVE. If you choose to measure the AC output
voltage, you must use an TRUE RMS VOLT METER. Using any other type of voltage measuring device will
result in an AC voltage reading that’s up to 20 to 30 volts lower than the rated value.
What battery do I need to run my inverter?
Batteries only have a limited power storage capacity and must be regularly recharged. In a car or on a boat
this is done when the engine is running. If you use a stand-alone battery, you must charge it with a separate
battery charger. To determine de required battery capacity you can divide the power consumption of a unit
by 10 for a 12 V inverter and by 20 for a 24V inverter. Example: You connect a portable TV with a power
consumption of 50W. If you have a 12V inverter, the current consumption is 5Amps and for a 24V system
2.5Amps. Depending on the capacity of the connected battery, you can easily calculate when you have to
recharge the battery. Never fully discharge your battery. It might be definitely damaged.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skytronic 651.539 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skytronic 651.539 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info