678226
129
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
Air compressor (the layout of the controls may be different depending on
the type of air compressor delivered with the vehicle)
Tyre inflation hose
Button for tyre pressure reduction
Tyre inflation pressure indicator
12 volt cable connector
ON and OFF switch
Tyre inflator bottle with sealing agent
Replacement valve core
Note
The declaration of conformity is included with the air compressor or the log
folder.
Preparing to use the breakdown kit
Read and observe on page 126 first.
For safety's sake, the following instructions must be observed before
undertaking a wheel repair on a road.
Park the vehicle as far as possible away from the traffic flow - choose a place
with a flat and firm surface.
Switch off the engine.
For vehicles with manual transmission select 1st gear.
For vehicles with automated transmission shift the lever to position D or R.
Firmly apply the handbrake.
Switch on the hazard warning lights and set up the warning triangle at the
prescribed distance.
Have all the occupants get out. While the repair is being carried out, the
passengers should not stand on the road (instead they should remain behind
a crash barrier, for instance).
Sealing and inflating tyres
Read and observe on page 126 first.
Sealing
Unscrew the valve cap from the damaged tyre.
Insert the valve remover
2
» Fig. 156 on page 126 on the valve insert, so that
the valve insert fits into the slot of the valve remover.
4
5
6
7
8
9
10
11
Unscrew the valve insert and place it on a clean base (rag, paper etc.).
Forcefully shake bottle
10
several times.
Firmly screw the inflation hose
3
onto the tyre inflater bottle
10
. The film
on the bottle cap is pierced.
Remove the plug from the inflation hose
3
and insert the bottle onto the
tyre valve.
Hold the bottle
10
with the bottom facing upwards and fill all of the sealing
agent from the tyre inflator bottle into the tyre.
Remove the filler plug from the tyre valve.
Screw in the valve insert with the valve remover
2
.
Inflating
Screw the air compressor tyre inflation hose
5
» Fig. 156 on page 126 firmly
onto the tyre valve.
For vehicles with manual transmission set the gearshift lever to the neutral
position.
For vehicles with automated manual transmission shift the lever to position
N.
Start the engine.
Plug the connector
8
into the 12 volt socket » page 56, 12-volt socket.
Switch on the air compressor with the ON and OFF switch
9
.
Once tyre inflation pressure of 2.0-2.5 bar has been reached, turn off the air
compressor. Observe the maximum running time of the air compressor ac-
cording to the instructions of the repair kit manufacturer » .
If an air pressure of 2.0 - 2.5 bar has not been reached, unscrew the tyre in-
flation hose
5
from the tyre valve.
Drive the vehicle 10 metres forwards or backwards to allow the sealing
agent to “distribute” in the tyre.
Firmly screw the tyre inflation hose
5
back onto the tyre valve and repeat
the inflation process.
Stick the sticker
1
» Fig. 156 on page 126 on the dash panel in the driver's
field of view.
At a tyre inflation pressure of 2.0 – 2.5 bar, the journey can be continued at a
maximum speed of 80 km/h or 50 mph.
127
Emergency equipment and self-help
129

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skoda Citigo - 2017 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skoda Citigo - 2017 in de taal/talen: Engels als bijlage per email.

De handleiding is 25,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Skoda Citigo - 2017

Skoda Citigo - 2017 Gebruiksaanwijzing - Nederlands - 168 pagina's

Skoda Citigo - 2017 Gebruiksaanwijzing - Deutsch - 168 pagina's

Skoda Citigo - 2017 Gebruiksaanwijzing - Français - 172 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info