678226
125
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
CAUTION
Screw the jack back to its starting position prior to putting it back in its box -
otherwise, there is a risk of damage to the box.
Note
The declaration of conformity is included with the jack or the log folder.
Changing a wheel
Preliminary work
For safety's sake, the following instructions must be observed before
changing a wheel on the road.
As far as possible park the vehicle as far as possible away from the traffic
flow - choose a place with a flat and firm surface.
Switch off the engine.
For vehicles with manual transmission select 1st gear.
For vehicles with automated transmission shift the lever to position D or R.
Firmly apply the handbrake.
Switch on the hazard warning lights and set up the warning triangle at the
prescribed distance.
Have all the occupants get out. The passengers should not stand on the
road while the wheel is being changed (they should remain behind a crash
barrier, for instance).
Changing a wheel
Remove the spare wheel » page 124.
Remove the full wheel trim » page 124 or caps » page 124.
Loosen the wheel bolts » page 125 » .
Jack up the vehicle until the wheel that needs changing, is clear of the
ground » page 125.
Unscrew the wheel bolts and place them on a clean surface (cloth, paper,
etc.).
Remove the wheel carefully.
Attach the spare wheel and slightly screw on the wheel bolts.
Lower the vehicle.
Tighten the wheel bolts opposite each other using the wheel wrench (“pull-
ing crossways”) » page 125.
Replace the wheel trim » page 124 and caps » page 124.
When fitting a wheel with unidirectional tyres, ensure that the direction of ro-
tation is correct » page 118.
All bolts must be clean and must turn easily. If screws are corroded and diffi-
cult to move, these must be replaced.
WARNING
Undo the wheel bolts just a little (about one turn), provided the vehicle
has not yet been jacked up. Otherwise the wheel could come loose and fall
off – risk of injury.
Under no circumstances must the bolts be greased or oiled - cause an ac-
cident.
Subsequent steps
After changing the wheel, the following work must be carried out.
Stow the replaced wheel in the well under the floor covering of the luggage
compartment and secure with a locking screw.
Stow the tool kit in the space provided and secure using the band.
Check tyre pressure on the mounted wheel and adjust if necessary and, with
vehicles with tyre pressure monitoring, save the tyre pressure values in the
system » page 100.
Have the tightening torque of the wheel bolts checked as soon as possible.
The prescribed tightening torque is 110 Nm.
Replace the damaged tyre. Repairing the tyre is not recommended.
WARNING
Tightening torque which is too high can damage the threads and this can
result in permanent deformation of the contact surfaces on the rim. Where
tightening torque is too low, the wheels may become loose while driving -
risk of accident. Therefore drive cautiously and only at a moderate speed
until the tightening torque has been checked.
123
Emergency equipment and self-help
125

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skoda Citigo - 2017 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skoda Citigo - 2017 in de taal/talen: Engels als bijlage per email.

De handleiding is 25,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Skoda Citigo - 2017

Skoda Citigo - 2017 Gebruiksaanwijzing - Nederlands - 168 pagina's

Skoda Citigo - 2017 Gebruiksaanwijzing - Deutsch - 168 pagina's

Skoda Citigo - 2017 Gebruiksaanwijzing - Français - 172 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info