758356
9
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
9
ENVIRONMENT
Do not dispose of electric tools, accessories and

(only for EU countries)
-in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
-symbol 5 will remind you of this when the need for
disposing occurs
NOISE / VIBRATION
Measured in accordance with EN 62841 the sound
pressure level of this tool is 81.7 dB(A) and the sound
power level 92.7 dB(A) (uncertainty K = 3 dB), and
the vibration 8.16 m/s² (triax vector sum; uncertainty
K = 1.5 m/s²)
The vibration emission level has been measured in
accordance with a standardised test given in EN 62841;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
-using the tool for dierent applications, or with dierent
or poorly maintained accessories, may signicantly
increase the exposure level
-the times when the tool is switched o or when it is
running but not actually doing the job, may signicantly
reduce the exposure level
! 
maintaining the tool and its accessories, keeping

patterns
b
Ponceuse excentrique 7480
INTRODUCTION
Cet outil est conçu pour le ponçage à sec du bois,
plastique, métal et mastic et des surfaces peintes
Cet outil n’est pas conçu pour le ponçage du gypse
Cet outil n’est pas conçu pour un usage professionnel
Lisez et conservez ce manuel d’instruction 3
CARACTERISTIQUES TECHNIQUES 1
2
A Fentes de ventilation
B Molette de réglage de la vitesse de ponçage
C Interrupteur marche/arrêt
D Bouton de réglage de la poignée
E Poignée auxiliaire
F Réservoir à poussière
G Support plateau
H Adaptateur de l’aspirateur*
J Vis du support plateau
K Feuille de ponçage
* NON FOURNI EN STANDARD
On/o switch
-switch on/o the tool by pushing switch C 2 in/out
! 

! 

! 

Speed control 9
For optimal sanding results on dierent materials
-with wheel B 2 you can set the desired sanding speed
-adjust speed to grit size used
-before starting a job, nd the optimal speed and grit by
testing out on spare material
Holding and guiding the tool w
! 
coloured grip area(s)
-guide the tool parallel to the working surface
-do not apply too much pressure on the tool; let the
sanding surface do the work for you
-do not tilt the tool in order to avoid unwanted sanding
marks
-keep ventilation slots A 2 uncovered
Sanding
-the amount of material removed is determined by the
selection of the sanding sheet, the preselected sanding
speed and the applied pressure
! 
to an increase of the sanding capacity, but to

! 
metal
Auxiliary handle e
-guide handle E can be adjusted by loosening/tightening
knob D
APPLICATION ADVICE
For determining the optimal grit (and speed), table q can
be used as reference
! 
For more information see www.skil.com
MAINTENANCE / SERVICE
This tool is not intended for professional use
Always keep tool and cord clean (especially ventilation
slots A 2)
-remove adhering sanding dust with a brush
! disconnect the plug before cleaning
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
-send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
Be aware that damage due to overload or improper
handling of the tool will be excluded from the warranty
(for the SKIL warranty conditions see www.skil.com or
ask your dealer)
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skil 7480 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skil 7480 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 2,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info