797778
11
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
11
USE
Combined switch for on/o and speed control A 2
Control the speed steplessly from zero to maximum by
putting less or more pressure on the trigger
Charging battery 9
!remove battery from tool
-connect charger to power source as illustrated 9a
-green light B will turn on indicating that the charger is
ready for operation 9a
-insert battery into charger as illustrated 9b
-red light C will turn on indicating that the battery is
being charged 9c
-after approximately 3 hours (2610Z08495) / 5 hours
(2610Z08496) the battery is fully charged and green
light B turns on 9d
!remove battery from charger after charging period
has ended thereby lengthening the service life of
the battery
IMPORTANT:
-if red light C does not turn on after inserting a battery,
this may mean that the battery is too cold or too hot
(charger only charges batteries when its temperature is
between 0°C and 45°C)
-the lithium-ion battery can be charged at any time
(interrupting the charging procedure does not damage
the battery)
-the lithium-ion battery does not have to be empty
before charging (no "memory-eect" as with nickel-
cadmium batteries)
-while charging, the charger and the battery may
become warm to touch; this is normal and does not
indicate a problem
-ensure that the outside surface of the battery is clean
and dry before inserting into charger
-do not remove battery from tool while it is running
-if you anticipate long periods of non-use for the tool, it
is best to unplug the charger from its power source
-when the lithium-ion battery is empty, the tool is
switched o automatically
-a signicantly reduced working period after charging
indicates that the battery is worn out and should be
replaced
Changing direction of rotation q
-when not properly set in left/right position, switch A 2
cannot be activated
!change direction of rotation only when tool is at a
complete standstill
Changing bits w
!do not use bits with a damaged shank
Torque control (VariTorque) e
-output torque will increase as clutch ring D is rotated
from 1 to 19; position E will lock up the clutch to permit
drilling or driving heavy duty work
-when turning in a screw, rst try VariTorque position 1
and increase until the desired depth has been reached
Mechanical gear selection r (2832)
-set selector G to desired speed
!actuate the gear selector while tool is running
slowly
LOW
-low speed
-high torque
above and by persons who
have physical, sensory or
mental limitations or a lack
of experience or knowledge
if a person responsible for
their safety supervises them
or has instructed them in the
safe operation of the charger
and they understand the
associated dangers (otherwise,
there is a danger of operating
errors and injuries)
Supervise children (this will
ensure that children do not play
with the charger)
Cleaning and user
maintenance of the battery
charger shall not be made by
children without supervision
Only use SKIL charger 2610Z08495 or 2610Z08496 and
SKIL battery pack 2610Z08494 with this tool
Charge battery only with the charger that is supplied with
the tool
Do not touch the contacts in the charger
Do not expose tool/charger/battery to rain
Do not charge battery in damp or wet environments
Do not use charger when damaged; take it to one of the
ocially registered SKIL Service Stations for a safety
check
Do not use charger when cord or plug is damaged; cord
or plug should be replaced immediately at one of the
ocially registered SKIL Service Stations
Do not use battery when damaged; it should be replaced
immediately
Do not disassemble charger or battery
Do not attempt to recharge non-rechargeable batteries
with the charger
Permitted ambient temperature (tool/charger/battery):
-when charging 0...+45°C
-during operation –20...+50°C
-during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL/CHARGER/
BATTERY
3 Read the instruction manual before use
4 Only use the charger indoors
5 Double insulation (no earth wire required)
6 Batteries may explode when disposed of in re, so do not
burn battery for any reason
7 Store tool/charger/battery in locations where temperature
will not exceed 50°C
8 Do not dispose of electric tools and batteries together
with household waste material
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skil 2830 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skil 2830 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 4.98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info