432234
60
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
WL-351
Wireless Gigabit Router 300N
(802.11bgn draft 2.0)
User Manual
T
ABLE OF
C
ONTENTS
1
KEY FEATURES................................................................................. 4
2
PACKAGE CONTENTS ....................................................................... 5
3
PRODUCT LAYOUT ........................................................................... 6
4
NETWORK + SYSTEM REQUIREMENTS ............................................. 8
5
WL-351 PLACEMENT ........................................................................ 8
6
SETUP LAN, WAN............................................................................. 9
7
PC NETWORK ADAPTER SETUP ...................................................... 10
8
BRING UP THE WL-351.................................................................. 14
9
INITIAL SETUP WL-351................................................................. 14
10
CONFIGURATION WIZARD ............................................................ 23
11
WIRELESS SETTINGS..................................................................... 25
12
FIREWALL SETTINGS..................................................................... 36
13
ADVANCED SETTINGS.................................................................... 42
14
TOOLBOX SETTINGS ...................................................................... 52
|3
Introduction
Congratulations on your purchase of the WL-351 Wireless Gigabit Router
300N. The WL-351 is compliant with draft 802.11n v 2.0 and up to 6 times
faster than standard 802.11g based routers while still being compatible with
802.11g & 802.11b gadgets. The WL-351 is not only a Wireless Access Point,
but also doubles as a 4-port full-duplex Gigabit switch that connects your
wired-Ethernet devices together at 10/100/1000 Mbps speeds.
At 300 Mbps wireless transmission rate, the Access Point built into the Router
uses advanced MIMO (Multi-Input, Multi-Output) technology to transmit
multiple streams of data in a single wireless channel, giving you seamless
access to multimedia content. The robust RF signal travels farther, eliminates
dead spots and extends the network range. For data protection and privacy,
the WL-351 encodes all wireless transmissions with WEP, WPA, or WPA2
encryption.
With the inbuilt DHCP Server & powerful SPI firewall, the WL-351 protects
your computers against intruders and most known Internet attacks and also
provides safe VPN pass-through. With the incredible speed and QoS function
of 802.11n (draft2.0), the WL-351 is ideal for media-centric applications like
streaming video, gaming, and VoIP telephony to run multiple media-intense
data streams through the network at the same time, with no degradation in
performance.
E |3
1 Key Features
Features Advantages
Incredible Data Rate up to
300Mbps*
Heavy data payloads such as
MPEG video streaming
IEEE 802.11n draft 2.0 Compliant
and backward compatible with
802.11b/g
Fully Interoperable with IEEE
802.11b / IEEE802.11g
compliant devices with legacy
protection
Four 10/100/1000 Mbps gigabit
Switch Ports (Auto-Crossover)
Scalability, extend your network.
Firewall supports Virtual Server
Mapping, DMZ, IP Filter, ICMP
Blocking, SPI
Avoids the attacks of Hackers or
Viruses from Internet
Support 802.1x authenticator,
802.11i (WPA/WPA2, AES), VPN
pass-through
Provide mutual authentication
(Client and dynamic encryption
keys to enhance security
WDS (Wireless Distribution System) Make wireless AP and Bridge
mode simultaneously as a
wireless repeater
* Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g, n chipset used. Actual
throughput may vary. Network conditions and environmental factors lower actual throughput rate.
All specifications are subject to change without notice.
E |3
2 Package Contents
Open the package carefully, and make sure that none of the items listed
below are missing. Do not discard the packing materials, in case of return;
the unit must be shipped back in its original package.
1. The WL-351 Router
2. A 220V~240V Power Adapter
3. A Quick Install Guide
4. A CD (User’s Manual)
5. A Warranty card
6. An UTP cable
E |3
3 Product Layout
Port Description
Power connector Connect the 12V DC adapter to this port
LAN (Yellow) Connect your PC’s or network devices to this port
WAN (Blue) Connect your ADSL/Cable modem to this port
E |3
Backlabel
The backlabel describes the IP address, login details, SSID, security code and
WPS button functionality.
Button Description
WPS BUTTON
Press 2 seconds for WPS mode
Press 10 seconds to reset the router
Press 15 Seconds to reset the router to factory defaults.
E |3
4 Network + System Requirements
To begin using the WL-351, make sure you meet the following as minimum
requirements:
PC/Notebook.
Operating System – Microsoft Windows XP/2000/VISTA
1 Free Ethernet port.
WiFi card/USB dongle (802.11 b/g/n) – optional.
External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45).
PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)
Ethernet compatible CAT5 cables.
5 WL-351 Placement
You can place the WL-351 on a desk or other flat surface, or you can mount it on
a wall. For optimal performance, place your Wireless Broadband Router in the
center of your office (or your home) in a location that is away from any potential
source of interference, such as a metal wall or microwave oven. This location
must be close to a power connection and your ADSL/Cable modem.
E |3
6 Setup LAN, WAN
WAN connection:
LAN connection:
E |3
7 PC Network Adapter setup
Windows XP
Enter [Start Menu] select [Control panel] select [Network].
Select [Local Area Connection]) icon=>select [properties]
E |3
Select [Internet Protocol (TCP/IP)] =>Click [Properties].
Select the [General] tab.
a. The WL-351 supports [DHCP] function, please select both [Obtain an IP
address automatically] and [Obtain DNS server address automatically].
E |3
Windows Vista
Enter [Start Menu] select [Control panel] select [View network status
and tasks] -> select [Manage network connections].
Select [Local Area Connection]) icon=>select [properties]
E |3
Select [Internet Protocol Version 4 (TCP/IPv4)] =>Click [Properties].
Select the [General] tab.
The WL-351 supports [DHCP] function, please select both [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
E |3
8 Bring up the WL-351
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. The WL-351 automatically enters the self-test phase. During
self-test phase, the Power LED will be lit continuously to indicate that this
product is in normal operation.
9 Initial Setup WL-351
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://192.168.0.1 in the address bar and press [Enter]
E |3
3. Type user name and password (default is admin/admin).
4. Click OK.
5. You will see the home page of the WL-351.
The System status section allows you to monitor the current status of your router
the UP time, hardware information, serial number as well as firmware version
information is displayed here.
E |3
LAN settings
The LAN tab gives you the opportunity to change the IP settings of the WL-
351.
Click <Apply> at the bottom of this screen to save any changes.
IP address 192.168.0.1. It is the routers LAN IP address (Your LAN clients
default gateway IP address).
IP Subnet Mask 255.255.255.0 Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree is Disabled by default. If the 802.1d Spanning Tree
function is enabled, this router will use the spanning tree protocol to prevent
network loops.
DHCP Server Enabled by default. You can enable or disable the DHCP server.
When DHCP is disabled no ip-addresses are assigned to clients and you have to
use static ip-addresses. When DHCP server is enabled your computers will be
assigned an ip-address automatically until the lease time expires.
E |3
Lease Time Forever. In the Lease Time setting you can specify the time period
that the DHCP lends an IP address to your LAN clients. The DHCP will change
your LAN client’s IP address when this time threshold period is reached.
IP Address Pool You can select a particular IP address range for your DHCP
server to issue IP addresses to your LAN Clients.
Note: default IP range is 192.168.0.100 ~ 192.168.0.200. If you want
your PC(s) to have a static/fixed IP address, then you’ll have to choose
an IP address outside this IP address Pool
Domain Name You can specify a Domain Name for your LAN. Or just keep the
default (sitecomwl351).
E |3
Device Status
View the Broadband router’s current configuration settings. Device Status
displays the configuration settings you’ve configured in the Wizard / Basic
Settings / Wireless Settings section.
E |3
Internet Status
This page displays whether the WAN port is connected to a Cable/DSL
connection. It also displays the router’s WAN IP address, Subnet Mask, and ISP
Gateway as well as MAC address, the Primary DNS. Press Renew button to
renew your WAN IP address.
E |3
DHCP Client Status
DHCP This page shows all DHCP clients (LAN PCs) currently connected to your
network. The table shows the assigned IP address, MAC address and expiration
time for each DHCP leased client. Use the Refresh button to update the available
information.
You can check Enable Static DHCP IP. It is possible to add more static DHCP
IPs. They are listed in the table Current Static DHCP Table. IP can be deleted
at will from the table.
Click apply button to save the changed configuration.
E |3
Reset
You can reset the router’s system should any problem exist. The reset
function essentially re-boots your routers system.
E |3
you know you can do these things. To protect your rights, we need to make restrictions that
forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions
translate to certain responsibilities for you if you distribute copies of the software, or if you
modify it. For example, if you distribute copies of such a program, whether gratis or for a fee,
you must give the recipients all the rights that you have. You must make sure that they, too,
receive or can get the source code. And you must show them these terms so they know their
rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this
license which gives you legal permission to copy, distribute and/or modify the software. Also, for
each author's protection and ours, we want to make certain that everyone understands that
there is no warranty for this free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is not the original, so that any
problems introduced by others will not reflect on the original authors' reputations. Finally, any
free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any patent must be licensed
for everyone's free use or not licensed at all. The precise terms and conditions for copying,
distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0.
This License applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General Public License.
The "Program", below, refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim or with modifications and/or
translated into another language. (Hereinafter, translation is included without limitation in the
term "modification".) Each licensee is addressed as "you". Activities other than copying,
distribution and modification are not covered by this License; they are outside its scope. The act
of running the Program is not restricted, and the output from the Program is covered only if its
contents constitute a work based on the Program (independent of having been made by running
the Program). Whether that is true depends on what the Program does.
1.
You may copy and distribute verbatim copies of the Program's source code as you receive it, in
any medium, provided that you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to
this License and to the absence of any warranty; and give any other recipients of the Program a
copy of this License along with the Program. You may charge a fee for the physical act of
transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2.
You may modify your copy or copies of the Program or any portion of it, thus forming a work
based on the Program, and copy and distribute such modifications or work under the terms of
Section 1 above, provided that you also meet all of these conditions: a) You must cause the
modified files to carry prominent notices stating that you changed the files and the date of any
change. b) You must cause any work that you distribute or publish, that in whole or in part
contains or is derived from the Program or any part thereof, to be licensed as a whole at no
charge to all third parties under the terms of this License. c) If the modified program normally
reads commands interactively when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you
provide a warranty) and that users may redistribute the program under these conditions, and
telling the user how to view a copy of this License. (Exception: if the Program itself is
interactive but does not normally print such an announcement, your work based on the Program
is not required to print an announcement.) These requirements apply to the modified work as a
whole. If identifiable sections of that work are not derived from the Program, and can be
reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when
you distribute the same sections as part of a whole which is a work based on the Program, the
distribution of the whole must be on the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each and every part regardless of who wrote
60

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sitecom-wl-351
  • inloggen sitecom
    Gesteld op 29-12-2012 om 15:00

    Reageer op deze vraag Misbruik melden
  • Ik ben mijn wachtwoord kwijt. Hoe kan ik dat zo eenvoudig mogelijk oplossen. Sitecom WL/351 Gesteld op 20-4-2012 om 10:55

    Reageer op deze vraag Misbruik melden
  • 15 seconden minimaal en dan uitzetten en dan weer aan, Geantwoord op 3-3-2013 om 18:05

    Waardeer dit antwoord Misbruik melden
  • Knopje indrukken terug naar fabrieksinstellingen dan wachtwoordt admin admin Geantwoord op 6-12-2013 om 17:30

    Waardeer dit antwoord Misbruik melden
  • nerlanstalig handleiding Router wl-351 Gesteld op 11-7-2011 om 15:33

    Reageer op deze vraag Misbruik melden
  • ik krijg geen verbinding met de nieuwe router wl-351 tussen de tv een (philips 46pfl9705h) en laptop (acer aspire 7720G)misschien verkeerde afstellingen. Hiervoor een router van sweex en deze werkte wel.
    Verbinding laptop router is prima.
    Verbinding netTV is prima. Gesteld op 26-2-2011 om 15:28

    Reageer op deze vraag Misbruik melden
    • Ik heb ook een 46pfl9705 TV vanb Philips en met de ADSL verbinding Euronet met linksys router werkte LAN verbinding wel met Sitecom WL351 lukt het ook niet. De wirelles verbinding werkt wel. In sitecom heb ik firewall al even uitgezet maar dat help ook niet. In router zie ik wel het MAC adres van de TV maar de TV krijg niet het goede IP adres.
      Philips service dienst is ook al langs geweest en met hun sytecom met data dongle werkt het wel, hadden het al vaker meegemaakt maar monteur wist de instellingen niet en het was niet een Philips probleem!!! Ligt aan UPC en of Sitecom.
      Welke instelling moet in sitecom aangepast worden. Geantwoord op 25-4-2011 om 22:31

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sitecom wl 351 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sitecom wl 351 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Sitecom wl 351

Sitecom wl 351 Gebruiksaanwijzing - Nederlands - 62 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info