642472

Sitecom WLX-7000 - AC1200 Wi-Fi Dual-band Access Point Handleiding

36
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
WLX-7000
Wi-Fi access point AC1200
Introduction
Thank you for purchasing the Sitecom WLX-7000 AC1200 Wi-Fi Dual-band Access Point.
This Access Point lets you upgrade your home network to enjoy a bigger Wi-Fi range,
faster speeds and better connections. It is extremely easy to setup, works with any
Internet provider and can be connected to any existing (modem) router or set-top box to
improve the home network. You can position the access point standing up, hanging on
the wall or flat on the desk.
The WLX-7000 AC1200 Wi-Fi Dual-band Access Point has strong internal dual-band
antennas that will give you a bigger Wi-Fi range than the (modem) router or set-top box
that you have received from your Internet provider. Connect to the access point’s Wi-Fi
throughout your whole home and browse, shop and watch wherever you want.
The WLX-7000 AC1200 Wi-Fi Dual-band Access Point lets you create a blazing-fast Wi-Fi
network and take advantage of the latest Wi-Fi technology 802.11ac. The access point is
capable of reaching combined Wi-Fi speeds of AC1200. Stream multiple HD movies and
enjoy Netflix, Spotify and many more, without lag and buffering. Wired devices such as
your HD TV or game console can be connected to the access point’s Gigabit ports to
make use of an ultra-stable and reliable connection with wired speeds of up to 1000
Mbps.
Use two Wi-Fi networks at the same time with Simultaneous Dual-band technology. The
standard 2,4 GHz frequency is ideal for lighter tasks such as surfing, mailing and
watching YouTube clips, while the 5 GHz frequency is your fast lane for demanding tasks
such as streaming HD movies with Netflix or playing video games online.
The WLX-7000 AC1200 Wi-Fi Dual-band Access Point is fully Plug & Play out of the box.
Simply connect the access point with the included network cable to a free port of your
(modem) router or set-top box, no installation or configuration necessary. The access
point is secured with a pre-set unique Wi-Fi password (WPA2) and can be found easily in
any list of Wi-Fi networks via the unique Wi-Fi name (SSID).
This product can be used safely in the countries listed below:
This product complies with the following European Union regulations:
Table of Contents
Key Features ............................................................................................. 6
Package Contents ....................................................................................... 7
Cautions.................................................................................................... 8
Product Layout ........................................................................................... 9
Network + System Requirements ............................................................... 11
Product Installation .................................................................................. 12
Setup your Computer................................................................................ 13
Configuration ........................................................................................... 16
Status .................................................................................................. 17
Wi-Fi Settings ....................................................................................... 22
Toolbox Settings.................................................................................... 30
Addendum A: GNU/GPL Information ........................................................... 33
Key Features
Features
Advantages
Incredible Data Rate up to
300Mbps on 2.4GHz and 866Mbps
on 5GHz*
Heavy data payloads such as MPEG
video streaming
IEEE 802.11ac Compliant and
backwards compatible with
802.11b/g/n
Fully Interoperable with IEEE
802.11b/g/n compliant devices with
legacy protection
Supports DHCP server function
Can act as a DHCP server to handle
all DHCP traffic on the network.
Easy to use web-based GUI
Graphical User Interface for network
configuration and management
purposes.
WPS Buttons
Easily connect the device to your
existing network and your clients
with just the push of a button.
* Theoretical wireless signal rate based on IEEE standard of 802.11b, g, n, ac chipset
used. Actual throughput may vary. Network conditions and environmental factors lower
actual throughput rate. All specifications are subject to change without notice.
Package Contents
Open the package carefully, and make sure that none of the items listed below are
missing. Do not discard the packing materials, in case of return; the unit must be
shipped back in its original package.
1. The WLX-7000 access point AC1200
2. A 110V~240V to 12V 1A Switching Power Adapter
3. A Quick Install Guide
4. An UTP cable
Cautions
This device’s design and manufacturer has your safety in mind. In order to safely and
effectively use this device, please read the following before usage.
Usage Cautions
The user should not modify this device. The environmental temperature should be within
+5 ~ +35 degrees Celsius.
Power
The router’s power voltage is DC 12V 1A.
When using this router, please connect the supplied AC adapter or AC adapter cable to
the router’s power jack. When placing the adapter cable, make sure it can’t get damaged
or be subject to pressure. To reduce the risk of electric shock, unplug the adapter first
before cleaning it. Never connect the adapter to the router in a humid or dusty area. Do
not replace the adapter or cable’s wire or connector.
Repair
If the device has a problem, you should take it to an appointed repair center and let the
specialists do the repair. Never repair the device yourself, you might damage the device
or endanger yourself.
Disposing of the device
When you dispose of the device, be sure to dispose of it appropriately. Some countries
may regulate disposal of an electrical device, please consult with your local authority.
Others
When using this device, please do not let it come into contact with water or other liquids.
If water is accidentally spilled on the device, please use a dry cloth to absorb the spillage.
Electronic products are vulnerable, when using please avoid shaking or hitting the device,
and do not press the buttons too hard.
Do not let the device come into contact with water or other liquid.
Do not disassemble, repair or change the design of the device, any damage done
will not be included in the repair policy.
Avoid hitting the device with a hard object, avoid shaking the device and stay
away from magnetic fields.
If during electrostatic discharge or a strong electromagnetic field the device will
malfunction, unplug the power cable. The product will return to normal
performance the next time it is powered on.
Product Layout
Description
Network Ports
You can use this port to connect to a wired modem or
router to add wireless functionality. You can also use
these ports to connect additional wired devices.
Backlabel and Network Details Folder
The Network Details Folder describes the IP address, login details, network name,
security code and OPS button functionality.
Description
Press 2 seconds for WPS/OPS mode
Press both buttons 15+ Seconds to reset to factory
defaults.
LED Description
From top to bottom:
LED
Color
Description
OPS
(White)
Shows OPS activity.
Power
(Red)
Shows the device is turned on.
5GHz WiFi
(Blue)
Shows 5GHz WiFi activity.
2.4GHz WiFi
(Blue)
Shows 2.4GHz WiFi activity.
LAN
(Blue)
Shows the cable is connected.
LAN
(Blue)
Shows the cable is connected.
LAN
(Blue)
Shows the cable is connected.
LAN
(Blue)
Shows the cable is connected.
LAN
(Blue)
Shows the cable is connected.
Network + System Requirements
To begin using the WLX-7000, make sure you meet the following as minimum
requirements:
Network Requirements
An Ethernet-based broadband modem
Web-based
Configuration
Computer with the following:
- Windows®, Macintosh, or Linux-based
operating system
- An installed Ethernet adapter or wireless
adapter
- Supported Browsers:
Internet Explorer 9 or higher
Firefox
Safari 4 or higher
Chrome
Product Installation
You can place the access point on a desk or other flat surface, or you can mount it on a
wall. For optimal performance, place your access point in the center of your home (or
your office) in a location that is away from any potential source of interference, such as a
metal wall or microwave oven. This location must be close to a power connection and
your ADSL/Cable modem.
Connect the supplied power-adapter to the power inlet port and connect it to a wall outlet.
Switch the access point on by flipping the switch on the back of the device. The access
point automatically enters the self-test phase. During self-test phase, the Power LED will
be lit continuously to indicate that this product is in normal operation.
Setup your Computer
Windows, Manual Connection
Click on the icon for wireless connectivity. This is usually located in the System
Tray, next to the clock.
Select the Sitecom network. The correct network name can be found on the
sticker on bottom of the router, or in the Network Details Folder.
Fill in the password for the wireless network. The correct password can be found
on the sticker on the bottom of the router, or in the Network Details Folder.
Wait for the icon to display that it’s connected to the network.
Windows, OPS Connection
Click on the icon for wireless connectivity. This is usually located in the System
Tray, next to the clock.
Select the Sitecom network. The correct network name can be found on the
sticker on bottom of the router, or in the Network Details Folder.
Push the OPS Button on the router. For 2.4GHz, press the 2.4GHz button. For
5GHz, press the 5GHz button.
Wait for the icon to display that it’s connected to the network.
Mac OSX
Click on the icon for wireless connectivity. This is usually located in the System
Tray, next to the clock.
Select the Sitecom network. The correct network name can be found on the
sticker on bottom of the router, or in the Network Details Folder.
Fill in the password for the wireless network. The correct password can be found
on the sticker on the bottom of the router, or in the Network Details Folder.
Wait for the icon to display that it’s connected to the network.
Configuration
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://sitecom.ap in the address bar and press [Enter]
3. Type user name and password (default username is ‘admin’, the password can be
found on the back of the Access Point).
4. Click OK.
5. You will see the home page of the WLX-7000.
Status
System Status
The System status section allows you to monitor the current status of your device, the
UP time, hardware information, serial number as well as firmware version information is
displayed here.
LAN settings
This device provides some control functions including IP address management, and DHCP
server function.
IP Address You can change the IP address of this device, so it can become a
part of your local network. Please remember this address or you will
not be able to connect the configuration menu of device.
Default Gateway Please input the IP address of default gateway of your network here.
DHCP Server If you want to activate the DHCP server function of this device,
please select ‘Enabled’ in the ‘DHCP Server’ option, and see the next
Section for detailed instructions. If you don’t want to use the DHCP
server function of this device, or there’s another DHCP server on the
network this device connects to, please select ‘Disable’. After you
finish, please go to the bottom of this page and click ‘Apply’.
Lease Time Please choose a lease time (the duration that every computer can
keep a specific IP address) of every IP address assigned by this
access point from dropdown menu.
DHCP Start IP Please input the start IP address of the IP range.
DHCP End IP Please input the end IP address of the IP range.
Hostname If you wish, you can also optionally input the domain name for your
network. This is optional.
After you finish, please click ‘Apply’.
Device Status
View the router’s current configuration settings. Device Status displays the configuration
settings you’ve configured in the Internet Settings and WiFi Settings sections.
Log
This page shows the current system log of the access point. It displays any event that
occurred during or after system start up. At the bottom of the page, the system log can
be saved <Save> to a local file for further processing or the system log can be cleared
<Clear> or it can be refreshed <Refresh> to get the most updated information. When
the system is powered down, the system log will disappear if not saved to a local file.
Statistics
Shows the counters of packets sent and received on LAN and WLAN.
Wi-Fi Settings
You can set parameters that are used for the wireless stations to connect to this access
point for the 2.4 GHz radio or 5 GHz radio.
Wireless Function
Enable or Disable Wireless function here. Click Apply and wait for module to be ready &
loaded.
Basic Settings
Band Please select the wireless band you wish to use. By selecting a
different band setting, you’ll be able to allow or deny the wireless
clients on a certain band.
SSID Please input the ESSID (the name used to identify this wireless
access point) here. You can input up to 32 alphanumerical
characters. PLEASE NOTE THAT THE ESSID IS CASE SENSITIVE.
Channel Number Please select a channel number you wish to use. The channel
number must be same as the wireless access point you wish to
connect.
Advanced
This tab allows you to set the advanced wireless options. The options included are
Channel Bandwidth, Fragment Threshold, RTS Threshold, Beacon Interval, and Preamble
Type. You should not change these parameters unless you know what effect the changes
will have on the access point.
Fragment Threshold Set the Fragment threshold of wireless radio. The default
value is 2346.
RTS Threshold Set the RTS threshold of wireless radio. The default value is
2347.
Beacon Interval Set the beacon interval of wireless radio. The default value is
100.
DTIM Period Set the DTIM period of wireless radio. The default value is 3.
Data Rate Set the wireless data transfer rate to a certain value. Since
most wireless devices will negotiate with each other and pick
a proper data transfer rate automatically, it’s not necessary
to change this value unless you know what will happen after
modification.
N Data Rate Set the data rate of 802.11 N clients, available options are
MCS 0 to MCS 15. It’s safe to set this option to ‘Auto’ and it’s
not necessary to change this value unless you know what will
happen after modification.
Channel Width Select wireless channel width (bandwidth taken by wireless
signals of this access point). It’s suggested to select ‘Auto
20/40MHz’. Do not change to ’20 MHz’ unless you know what
it is.
Preamble Type Set the type of preamble of wireless radio. The default
setting is ‘Short Preamble’.
CTS Protect Enabling this setting will reduce the chance of radio signal
collisions between 802.11b and 802.11g wireless access
points. It’s recommended to set this option to ‘Auto’.
TX Power You can set the output power of wireless radio. Unless you’re
using this wireless access point in a really big space, you
may not have to set output power to 100%. This will enhance
security (malicious / unknown users on a distance will not be
able to reach your wireless access point).
Security
This device provides many types of wireless security (wireless data encryption). When
you use data encryption, data transferred by radio signals in the air will become
unreadable for those people who don’t know the correct encryption key (encryption
password).
There are three types of security level you can select: Disable (no security - data
encryption disabled), WEP and WPA Pre-shared Key. Please refer to the following sections
for detailed instructions.
Disabled
When you select ‘Disabled’, wireless encryption for the network is disabled. This is not
recommended.
Click <Apply> at the bottom of the screen to save the above configuration. You can now
configure other sections by choosing Continue, or choose Apply to apply the settings and
reboot the device.
WEP
Key Length You can select the WEP key length for encryption, 64-bit or 128-bit. The
larger the key will be the higher level of security is used, but the
throughput will be lower.
Key Format You may select ASCII Characters (alphanumeric format) or Hexadecimal
Digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key.
Key1 - Key4The WEP keys are used to encrypt data transmitted in the wireless network.
Use the following rules to setup a WEP key on the device.64-bit WEP: input
10-digits Hex values (in the "A-F", "a-f" and "0-9" range) or5-digit ASCII
character as the encryption keys. 128-bit WEP: input 26-digitHex values (in
the "A-F", "a-f" and "0-9" range) or 13-digit ASCII characters as the
encryption keys.
Click <Apply> at the bottom of the screen to save the above configuration. You can now
configure other sections by choosing Continue, or choose Apply to apply the settings and
reboot the device.
WPA
WPA Unicast Cipher Suite Available options are: WPA (TKIP), WPA2 (AES), and
WPA2 Mixed. You can select one of them, but you
have to make sure your wireless client supports the
cipher you selected.
Pre-shared Key Format Please select the format of pre-shared key here,
available options are ‘Passphrase’ (8 to 63
alphanumerical characters) and ‘Hex (64 hexadecimal
characters – 0 to 9 and a to f).
Pre-shared Key Please input pre-shared key according to the key
format you selected here. For security reason, don’t
use simple words.
WPS
Wi-Fi Protected Setup (WPS) is the simplest way to establish a connection between the
wireless clients and the wireless router. You don’t have to select the encryption mode
and fill in a long encryption passphrase every time when you try to setup a wireless
connection. You only need to press a button on both wireless client and wireless router,
and WPS will do the rest for you.
The Push button on the WLX-7000 has 2 functions:
Client mode: If you push the button for 0-5 seconds the device acts as a WPS enrollee.
In this mode it’s set to connect to your existing Wireless network. You have to push the
button on your router within 2 minutes.
AP mode: If you push the button for 5-10 seconds the device acts as a WPS registrar. In
this mode it’s set to connect client devices to the WLX-7000. You have to push the button
on the wireless client or in the utility of the wireless client within 2 minutes.
If you want to use the PIN code, you have to know the PIN code of the wireless client
and switch it to WPS mode, then fill-in the PIN code of the wireless client through the
web configuration interface of the wireless router.
Check the box to enable the WPS function and uncheck it to disable the WPS function.
WPS Current Status If the wireless security (encryption) function of this wireless
router is properly set, you’ll see a ‘Configured’ message here.
Otherwise, you’ll see ‘UnConfigured’.
Self Pin Code This is the WPS PIN code of the wireless router. You may
need this information when connecting to other WPS-enabled
wireless devices.
SSID This is the network broadcast name (SSID) of the router.
Authentication Mode It shows the active authentication mode for the wireless
connection.
Passphrase Key It shows the passphrase key that is randomly generated by
the wireless router during the WPS process. You may need
this information when using a device which doesn’t support
WPS.
Mode In Client mode the device is set to connect to your existing
network. In Registrar mode the device is set to connect to
your clients.
WPS via Push Button Press the button to start the WPS process. The device will
wait for the WPS request from the wireless devices within 2
minutes.
WPS via PIN You can fill-in the PIN code of the wireless device and press
the button to start the WPS process. The router will wait for
the WPS request from the wireless device within 2 minutes.
Toolbox Settings
Firmware
If there is a new firmware available, you can upload the firmware to the device to get
extra functions or problem fixes.
Click the ‘Browse’ button. You’ll be prompted to provide the filename of the firmware
upgrade file. Please download the latest firmware file from our website, and use it to
upgrade your device.
After a firmware file is selected, click the ‘Apply’ button, and the device will start the
firmware upgrade procedure automatically. The procedure may take several minutes, so
please be patient.
Alternatively, press the ‘Check for updates’ button to allow the access point to check on
the Sitecom update server for a new firmware.
NOTE: Never interrupt the upgrade procedure by closing the web browser or
physically disconnecting your computer from the device.
Back-up
You can back up all configurations of this device to a file, so you can make several copies
of access point configuration for security reasons.
Restore to Factory Default Click this button to remove all settings you made and
restore the configuration of this device back to factory
default settings.
Backup Settings Press ‘Save...’ button, and you’ll be prompted to
download the configuration as a file. The default
filename is ‘config.bin’. You can save it as another
filename for different versions, and keep it in a safe
place.
Restore Settings Press ‘Browse…’ to pick a previously-saved
configuration file from your computer, and then click
‘Upload’ to transfer the configuration file to the device.
After the configuration is uploaded, the configuration
will be replaced by the file you just uploaded.
Reset
When you think the device is not working properly, you can use this function to restart
the device; this may help and solve the problem.
This function is useful when the device is far from you or unreachable. However, if the
device is not responding, you may have to switch it off by unplugging the power plug and
plugging it back again after 10 seconds.
Addendum A: GNU/GPL Information
Parts of the firmware of the WLX-7000 Wi-Fi AC1200 Gigabit Access Point are subject to the GNU general
public license.
Licensing Information
This product includes third-party software licensed under the terms of the GNU General Public License.
You can modify or redistribute this free software under the terms of the GNU General Public License.
Please see Appendix B for the exact terms and conditions of this license.
Specifically, the following part of this product is subject to the GNU GPL:
#
Package
Source
version
GPL
1
Kernel version
https://www.kernel.org/
3.2.9
GPL V2
2
Busybox
http://www.busybox.net/downloads/
1.19.4
GPL V2
3
Mtd-util
http://www.filewatcher.com/m/mtd-utils-1.4.6.tar.gz.337429-0.html
1.4.6
GPL V2
4
Bridge-utils
http://www.linuxfromscratch.org/blfs/view/svn/basicnet/bridge-
utils.html
1.5
GPL V2
5
Utelnetd
www.pengutronix.de/software/utelnetd/download/
0.1.9
GPLv2
6
Ebtables
http://en.sourceforge.jp/projects/sfnet_ebtables/downloads/ebtables
/ebtables-2-0-10-4/ebtables-v2.0.10-4.tar.gz/
2.0.10
GPLv2
7
Iproute2
http://pkgs.fedoraproject.org/repo/pkgs/iproute/iproute2-
2.6.39.tar.gz/8a3b6bc77c2ecf752284aa4a6fc630a6/
2.6.39
GPLv2
8
Ntpclient
http://doolittle.icarus.com/ntpclient/
2010-
365
GPLv2
9
Udhcp
http://freecode.com/projects/udhcp
0.9.9
GPLv2
10
Dnsmasq
http://www.thekelleys.org.uk/dnsmasq/
2.59
GPLv2
11
iptables
http://www.netfilter.org/projects/iptables/downloads.html
1.4.13
GPLv2
12
uClibc
http://www.uclibc.org/
0.9.33.2
LGPL
13
Libcgi
http://sourceforge.net/projects/libcgi/
1.0
LGPL
14
libdaemon
http://www.filewatcher.com/m/libdaemon-0.14.tar.gz.52-0.html
0.14
LGPL
Availability of source code
This product contains open source software, including software licensed under the GNU General Public
License (GPL) v2/v3 and/or the Lesser/Library General Public License (LGPL) v2/2.1/3 as specified in the
“Licensing Information” available above. As per the license terms of these licenses Sitecom Europe B.V.
offers to send you the source code for the open source components in this product on a CD/DVD for up
to three years after support for this product has stopped for a charge of EUR 10. Please note that the
source code of the firmware might already be on the support CD/DVD that is shipped with your product.
To get a copy of the software, please send an e-mail to gpl-request@sitecom.com or write to Sitecom
Europe B.V., P.O. Box 12040, 3004GA Rotterdam, The Netherlands. Please specify the device type and
version number when contacting us to ensure smooth handling of your request. For your convenience
you may also find the source code for the latest supported firmware version on the product’s website
during the time the product is supported. If you cannot find the source code for the relevant firmware
please contact us.
No Warranty
The free software included in this product is distributed in the hope that it will be useful, but WITHOUT
ANY LIABILITY OF OR ANY WARRANTY FROM THE LICENSOR.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place - Suite
330, Boston, MA 02111-1307, USA Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public License is intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users. This General Public License applies to
most of the Free Software Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Library General Public
License instead.) You can apply it to your programs, too. When we speak of free software, we are
referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the
freedom to distribute copies of free software (and charge for this service if you wish), that you receive
source code or can get it if you want it, that you can change the software or use pieces of it in new free
programs; and that you know you can do these things. To protect your rights, we need to make
restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These
restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you
modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must
give the recipients all the rights that you have. You must make sure that they, too, receive or can get
the source code. And you must show them these terms so they know their rights. We protect your rights
with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software. Also, for each author's protection and ours,
we want to make certain that everyone understands that there is no warranty for this free software. If
the software is modified by someone else and passed on, we want its recipients to know that what they
have is not the original, so that any problems introduced by others will not reflect on the original authors'
reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the
danger that redistributors of a free program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any patent must be licensed for
everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright
holder saying it may be distributed under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program" means either the Program or
any derivative work under copyright law: that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is
included without limitation in the term "modification".) Each licensee is addressed as "you". Activities
other than copying, distribution and modification are not covered by this License; they are outside its
scope. The act of running the Program is not restricted, and the output from the Program is covered only
if its contents constitute a work based on the Program (independent of having been made by running the
Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to
the absence of any warranty; and give any other recipients of the Program a copy of this License along
with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your
option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on
the Program, and copy and distribute such modifications or work under the terms of Section 1 above,
provided that you also meet all of these conditions: a) You must cause the modified files to carry
prominent notices stating that you changed the files and the date of any change. b) You must cause any
work that you distribute or publish, that in whole or in part contains or is derived from the Program or
any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License. c) If the modified program normally reads commands interactively when run, you must cause it,
when started running for such interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a notice that there is no warranty (or else,
saying that you provide a warranty) and that users may redistribute the program under these conditions,
and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on the Program is not required to print
an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of
that work are not derived from the Program, and can be reasonably considered independent and
separate works in themselves, then this License, and its terms, do not apply to those sections when you
distribute them as separate works. But when you distribute the same sections as part of a whole which is
a work based on the Program, the distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to each and every part regardless of
who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work
written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative
or collective works based on the Program. In addition, mere aggregation of another work not based on
the Program with the Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2 above provided that you also do one of the
following: a) Accompany it with the complete corresponding machine-readable source code, which must
be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third
party, for a charge no more than your cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1
and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the
information you received as to the offer to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you received the program in object code or
executable form with such an offer, in accord with Subsection b above.) The source code for a work
means the preferred form of the work for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains, plus any associated interface definition
files, plus the scripts used to control compilation and installation of the executable. However, as a special
exception, the source code distributed need not include anything that is normally distributed (in either
source or binary form) with the major components (compiler, kernel, and so on) of the operating system
on which the executable runs, unless that component itself accompanies the executable. If distribution of
executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code,
even though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under
this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and
will automatically terminate your rights under this License. However, parties who have received copies,
or rights, from you under this License will not have their licenses terminated so long as such parties
remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants
you permission to modify or distribute the Program or its derivative works. These actions are prohibited
by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any
work based on the Program), you indicate your acceptance of this License to do so, and all its terms and
conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose any further restrictions on the recipients'
exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason
(not limited to patent issues), conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of
this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License
and any other pertinent obligations, then as a consequence you may not distribute the Program at all.
For example, if a patent license would not permit royalty-free redistribution of the Program by all those
who receive copies directly or indirectly through you, then the only way you could satisfy both it and this
License would be to refrain entirely from distribution of the Program. If any portion of this section is held
invalid or unenforceable under any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this
section to induce you to infringe any patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent
application of that system; it is up to the author/donor to decide if he or she is willing to distribute
software through any other system and a licensee cannot impose that choice. This section is intended to
make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder who places the Program under this License may add
an explicit geographical distribution limitation excluding those countries, so that distribution is permitted
only in or among countries not thus excluded. In such case, this License incorporates the limitation as if
written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License
from time to time. Such new versions will be similar in spirit to the present version, but may differ in
detail to address new problems or concerns. Each version is given a distinguishing version number. If the
Program specifies a version number of this License which applies to it and "any later version", you have
the option of following the terms and conditions either of that version or of any later version published by
the Free Software Foundation. If the Program does not specify a version number of this License, you may
choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is copyrighted by
the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions
for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our
free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. Because the program is licensed free of charge, there is no warranty for the program, to the extent
permitted by applicable law. Except when otherwise stated in writing the copyright holders and/or other
parties provide the program "as is" without warranty of any kind, either expressed or implied, including,
but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The
entire risk as to the quality and performance of the program is with you. Should the program prove
defective, you assume the cost of all necessary servicing, repair or correction.
12. In no event unless required by applicable law or agreed to in writing will any copyright holder, or any
other party who may modify and/or redistribute the program as permitted above, be liable to you for
damages, including any general, special, incidental or consequential damages arising out of the use or
inability to use the program (including but not limited to loss of data or data being rendered inaccurate
or losses sustained by you or third parties or a failure of the program to operate with any other
programs), even if such holder or other party has been advised of the possibility of such damages.
END OF TERMS AND CONDITIONS
Revision 1.0
© Sitecom Europe BV 2016
Note: All the information contained in this manual was correct at the time of
publication.
However, as our engineers are always updating and improving the product, your
device’s software may have a slightly different appearance or modified
functionality than presented in this manual.
… 36

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sitecom-WLX-7000---AC1200-Wi-Fi-Dual-band-Access-Point

  • ik heb het kastje gekocht bij de kringloop. Maar hoe sluit ik dat nu aan op het netwerk hier op kantoor. op de sticker staat typenummer en wachtwoord. Maar waar moet ik dat ergens invullen? Gesteld op 20-9-2023 om 18:42

    Reageer op deze vraag Misbruik melden

  • Ik heb mijn WLX-7000-AC1200 gereset, maar ik kom er met geen mogelijkheid meer in. Heb al geprobeerd om de knoppen in te drukken en vast te houden, en rechtstreeks op de laptop in te loggen of via de modem. Maar niets lukt. Kan iemand mij misschien helpen? Gesteld op 13-6-2020 om 20:39

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sitecom WLX-7000 - AC1200 Wi-Fi Dual-band Access Point bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sitecom WLX-7000 - AC1200 Wi-Fi Dual-band Access Point in de taal/talen: Engels als bijlage per email.

De handleiding is 1,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info