462919
36
Verklein
Vergroot
Pagina terug
1/67
Pagina verder
WL-358/359/369
Wireless ADSL2+ Modem Router
2
User Manual
T
ABLE OF
C
ONTENTS
1
KEY FEATURES .................................................................................................................... 4
2
PACKAGE CONTENTS....................................................................................................... 5
3
PRODUCT LAYOUT............................................................................................................. 6
4
SYSTEM REQUIREMENTS............................................................................................... 8
5
WL-358/359/369 PLACEMENT.................................................................................. 8
6
SETUP LAN, WAN............................................................................................................... 9
7
PC NETWORK ADAPTER SETUP................................................................................ 10
8
BRING UP THE WL-358/359/369.......................................................................... 13
9
INITIAL SETUP WL-358/359/369........................................................................ 13
10
CONFIGURATION WIZARD......................................................................................... 19
11
BASIC SETTINGS.............................................................................................................. 20
12
ADVANCED SETTINGS................................................................................................... 34
13
FIREWALL SETTINGS.................................................................................................... 49
14
TOOLBOX SETTINGS...................................................................................................... 59
Version: 1.0
Introduction
Congratulations on your purchase of the WL-358/359/369 Wireless ADSL2+
Modem. The WL-358 uses technology based on 802.11n, while the WL-359/369
is fully compliant with 802.11n. These modems are also fully compliant with
802.11g & 802.11b. These modems provide the best performance when used in
combination with 802.11n client adapters.
The WL-358/359/369 is not only a Modem or Wireless Access Point, but can also
be used to connect wired Ethernet devices.
For data protection and privacy, the WL-358/359/369 can encode all wireless
transmissions with WEP, WPA or WPA2 encryption. By default, the modem is
secured with a WPA2 (AES) encryption key. (The WPA2-key is printed on the
label underneath the modem.)
With a built-in DHCP Server & powerful SPI firewall the WL-358/359/369
protects your computers against intruders and known Internet attacks, and also
provides safe VPN pass-through.
1 Key Features
Features Advantages
IEEE 802.11g compliant Fully Interoperable with IEEE 802.11b /
IEEE802.11g compliant devices
Based on 802.11n technology WL-358: Up to 3 times faster than
regular 802.11g.
WL-359/369: Up to 6 times faster than
regular 802.11g
(in combination with a 150n or 802.11n
wireless adapter)
Four 10/100 Mbps Fast
Ethernet Port (Auto-
Crossover)
To connect four wired PC's as well.
Firewall supports Virtual
Server
Mapping, DMZ, IP Filter, ICMP
Blocking, SPI
Avoids the attacks of Hackers or Viruses
from Internet
Supports 802.11i
(WPA/WPA2, AES), VPN pass-
through
Provide mutual authentication (Client
and dynamic encryption keys to
enhance security)
Integrated modem (Annex A) Fully compatible with the fastest
ADSL2+ connections up-to-date.
2 Package Contents
Open the package carefully, and make sure that none of the items listed
below are missing. Do not discard the packing materials, in case of return;
the unit must be shipped back in its original package.
1. WL-358/359/369 modem/router
2. 220V ~ 240V Power Adapter
3. Quick Install Guide
4. CD (User’s Manual)
5. Warranty card
6. UTP cable
7. RJ11 cable
3 Product Layout
Port Description
ADSL Connect your telephone/ADSL cable this port
LAN
Connect the cable from your PC or network device to
this ports.
Power connector
Connect your power adapter to this port.
Power button Turn the modem On or Off.
Power connector
LAN / computer connections
Modem connection
Power button
Back label
The back label describes the corresponding LED indications and port functionality.
LED Description
Power Lights up when powered ON. Blinks on TEST/RESET
ADSL Lights up when an ADSL cable is connected.
Internet Lights up when internet connection is UP.
WLAN Lights up in Blue when WLAN is enabled. Blinks on traffic
OPS Blinks when OPS mode is on
LAN1~4 When a LAN cable is connected the corresponding light lights up.
4 System Requirements
To begin using the WL-358/359/369, make sure you meet the following as
minimum requirements:
PC/Notebook.
1 Free Ethernet port.
Wi-Fi card/USB dongle (802.11 b/g/n) – optional.
Annex A, ADSL internet connection.
PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)
Ethernet compatible CAT5 cables.
5 WL-358/359/369 Placement
You can place the WL-358/359/369 on a desk or other flat surface, or you
can mount it on a wall. For optimal performance, place your Wireless
Broadband Modem/Router in the center of your office (or your home) in a
location that is away from any potential source of interference, such as a
metal wall or microwave oven. This location must be close to a power
connection and the ADSL/phone line should not be over 2 meters long.
6 Setup LAN, WAN
Modem connection
LAN / computer connections
7 PC Network Adapter setup
Windows XP
Go to [Start Menu], [Control panel], [Network Connections].
Right-mouse-click on the [Local Area Connection]) icon, and select
[properties]
Select [Internet Protocol (TCP/IP)] =>Click [Properties].
Select the [General] tab.
The WL-358/359 supports DHCP. Please select both [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
Windows Vista/Windows 7
Go to [Start Menu], [Control panel], [View network status and
tasks], -> [Manage network connections].
Right-mouse-click on the [Local Area Connection]) icon, and select
[properties]
Select [Internet Protocol Version 4 (TCP/IPv4)], and Click [Properties].
Open the [General] tab.
The WL-358/359/369 supports DHCP. Please select both [Obtain an IP
address automatically] and [Obtain DNS server address automatically].
8 Bring up the WL-358/359/369
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. Press the Power-Button to turn the modem on.
The WL-358/359/369 automatically enters the self-test phase. During self-test
phase, the Power LED will blink briefly, and then will be lit continuously to
indicate that this product is in normal operation.
9 Initial Setup WL-358/359/369
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://192.168.0.1 in address bar and press [Enter]
Type user name and password (The default username is “admin”, the
password can be found on the back label of the device).
3. Click OK.
4. You will see the home page of the WL-358/359/369.
Status
The System status section allows you to monitor the current status of your
router: the UP time, hardware information, serial number as well as firmware
version information is displayed here.
Statistics
You can view statistics on the processing of IP packets on the networking
interfaces. You will not typically need to view this data, but you may find it
helpful when working with your ISP to diagnose network and Internet data
transmission problems. To display statistics for any new data, click “Refresh”.
ADSL Statistics
This page shows the ADSL line statistic information.
DHCP List
This page shows all DHCP clients (LAN PCs) currently connected to your
network. The table shows the assigned IP address, MAC address and expiration
time for each DHCP leased client.
Use the Refresh button to update the available information.
QoS Queue
The screen allows you to configure a QoS queue and assign it to a specific
network.
If the channel operation modes of your ADSL router are not configured and you
enable the QoS function, you’ll see the following message:
Please follow the Setup Wizard to finish WAN configuration before setting up
QoS.
Parameter Description
Queue
Description
The description of the queue will appear automatically
according to your selection.
Queue Status The status of the queue is selected here.
Queue
Interface
The WAN interface of the queue is selected here.
Queue Priority The priority of the queue is selected here.
10 Configuration Wizard
Click Wizard to configure the modem. The Setup wizard will now be displayed;
check that the adsl line is connected and click Next.
Select your country from the Country list. Select your internet provider. Click
Next.
Depending on the chosen provider, you may need to enter your user name and
password or hostname in the following window. After you have entered the
correct information, click Next.
Click Finish to complete the configuration.
11 Basic Settings
LAN Settings
This page is used to configure the LAN interface of your ADSL Router. You can
set IP address, subnet mask, and IGMP Snooping.
Parameter Description
Interface Name The interface name is “br0”.
IP Address
Enter the IP Address of the ADSL router for the local user to
access the router’s web page. By default, the IP Address is
192.168.0.1.
Subnet Mask Enter the Subnet Mask of the ADSL router. By default, the
Subnet Mask is 255.255.255.0.
Secondary IP Assign second IP address to LAN.
IGMP Snooping Enable/disable the IGMP snooping function for the multiple
bridged LAN ports. When “IGMP Snoop” (Internet Group
Management Protocol Snoop) is enabled, the router can
make intelligent multicast forwarding decisions by examining
the contents of each frame’s IP header. Without the function,
the router will broadcast the multicast packets to each port
and may create excessive traffic on the network and degrade
the performance of the network.
Ethernet to
Wireless
Blocking
Enable/disable the ‘Ethernet to Wireless Blocking’, when this
function is enabled, the traffic between Ethernet and wireless
interfaces is not allowed.
DHCP Settings
You can configure your network and the router to use the Dynamic Host
Configuration Protocol (DHCP). This page allows you to select the DHCP mode
that this router will support.
There are two different DHCP Modes: DHCP Server and DHCP Relay. When the
router is acting as DHCP server, please configure the router in the “DHCP
Server” page; while acting as DHCP Relay, you can setup the relay in the “DHCP
Relay” page.
DHCP Relay
Some ISPs perform the DHCP server function for their customers’ home/small
office network. In this case, you can configure this device to act as a DHCP
relay agent. When a user’s computer on your network requests Internet access,
the router contacts your ISP to obtain the IP configuration, and then forward
that information to the computer.
Parameter Description
DHCP Server Address
Specify the IP address of your ISP’s DHCP server.
Requests for IP information from your LAN interface
will be passed to the default gateway, which should
route the request appropriately.
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser:
Press ‘Continue’ to save the settings made and go back to the web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
DHCP Server
When the DHCP server is enabled, the router will automatically give your LAN
clients an IP address. If the DHCP is not enabled then you’ll have to manually
set your LAN client’s IP addresses.
Parameter Description
LAN IP Address The current IP Address of the router.
Subnet Mask The current Subnet Mask of the router.
IP Pool Range You can select a particular IP address range for your
DHCP server to issue IP addresses to your LAN Clients.
By default, the IP range is starting from IP 192.168.0
.100
to 192.168.0.200.
Show Client Click this button and a table is displayed. You can know
the assigned IP address, MAC address and time expired
for each DHCP leased client.
Max Lease Time In the Lease Time setting you can specify the time period
that the DHCP Server lends an IP address to your LAN
clients. The
DHCP will change your LAN client’s IP address
when this time threshold period is terminated.
Domain Name A user-friendly name that refers to the group of hosts
(subnet) that will be assigned addresses from this pool.
Gateway Address The IP address of the ADSL router.
MAC Base
Assignment
C
lick this button and you can assign a static IP Address to
the computer with the designated MAC Address. The MAC
Address is the 12-digit hexadecimal number, for example
"00-d0-59-c6-12-43". The Assigned IP Address should be
a unique IP Address.
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
WAN Settings
The page allows you to select any combination of DSL modes.
Parameter Description
ADSL modulation Choose preferred ADSL standard protocols.
Annex L Option Enable/Disable ADSL2/ADSL2+ Annex L capability.
Annex M Option Enable/Disable ADSL2/ADSL2+ Annex M capability.
ADSL Capability Bitswap Enable – Enable/Disable bitswap capability.
SRA Enable – Enable/Disable SRA (seamless rate
adaptation) capability.
ADSL Tone Choose tones to be masked. The masked tones will not
carry any data. Click “Tone Mask” to mask the tone
number you have selected or all the tone numbers.
When you finish, click ‘Apply. You’ll see the following message displayed on the
web browser:
Press ‘Continue’ to save the settings made and back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
DNS
A Domain Name System (DNS) server is like an index of IP addresses and Web
addresses. If you type a Web address into your browser, such as
“www.router.com”, a DNS server will find that name in its index and the
matching IP address. This page is used to select the way to obtain the IP
addresses of the DNS servers.
Parameter Description
Attain DNS Automatically
Select this item if you want to use the DNS
servers obtained from ISP.
Set DNS Manually Select this item to specify up to three DNS IP
addresses.
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
protection mode is enabled, the throughput of the AP
will be a li
ttle lower due to many of frame traffic should
be transmitted.
Aggregation This function is used to join multiple data packets for
transmission as a single unit to increase network
efficiency.
Short GI The 802.11n draft specifies two guard intervals: 400ns
(short) and 800ns (long). Support of the 400ns GI is
optional for transmit and receive. Enable this function
will increase network efficiency.
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sitecom WL-599 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sitecom WL-599 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info