527747
33
Verklein
Vergroot
Pagina terug
1/59
Pagina verder
WL-347/WL-348
Wireless Broadband
modem/router
(ADSL2+, 802.11B/G/N draft 2.0)
2
User Manual
Version: 1.0
3
T
ABLE OF
C
ONTENTS
1
KEY FEATURES ...................................................................................................................... 5
2
PACKAGE CONTENTS......................................................................................................... 6
3
PRODUCT LAYOUT .............................................................................................................. 7
4
NETWORK + SYSTEM REQUIREMENTS ................................................................... 9
5
WL-347/WL-348 PLACEMENT...................................................................................... 9
6
SETUP LAN, WAN............................................................................................................... 10
7
PC NETWORK ADAPTER SETUP (WINDOWS XP) .............................................11
8
BRINGING UP THE WL-347/WL-348 ..................................................................... 13
9
INITIAL SETUP WL-347/WL-348 ............................................................................ 13
10
CONFIGURATION WIZARD...................................................................................... 22
11
WIRELESS SETTINGS ................................................................................................. 24
12
FIREWALL SETTINGS ................................................................................................. 35
13
ADVANCED SETTINGS................................................................................................ 41
14
TOOLBOX SETTINGS ................................................................................................... 53
4
Introduction
Congratulations on your purchase of the WL-347/WL-348 Wireless Network
Broadband modem/Router. The WL-347/WL-348 is compliant with draft
802.11n v 2.0 and up to 6 times faster than standard 802.11g based routers
while still being compatible with 802.11g & 802.11b gadgets. The WL-
347/WL-348 is not only a Modem or Wireless Access Point, but also doubles
as a 4-port full-duplex Switch that connects your wired-Ethernet devices
together at.
At 300 Mbps wireless transmission rate, the Access Point built into the
Modem/Router uses advanced MIMO (Multi-Input, Multi-Output) technology to
transmit multiple steams of data in a single wireless channel, giving you
seamless access to multimedia content. Robust RF signal travels farther,
eliminates dead spots and extends network range. For data protection and
privacy, the WL-347/WL-348 encodes all wireless transmissions with WEP,
WPA, and WPA2 encryption.
With an inbuilt DHCP Server & powerful SPI firewall the WL-347/WL-348
protects your computers against intruders and most known Internet attacks
but provides safe VPN pass-through. With the incredible speed and QoS
function of 802.11n(draft2.0), the WL-347/WL-348 is ideal for media-centric
applications like streaming video, gaming, and VoIP telephony to run multiple
media-intense data streams through the network at the same time, with no
degradation in performance.
5
1 Key Features
Features Advantages
Incredible Data Rate up to
300Mbps**
Heavy data payloads such as MPEG
video streaming
IEEE 802.11n draft 2.0 Compliant
and backward compatible with
802.11b/g
Fully Interoperable with IEEE
802.11b / IEEE802.11g compliant
devices with legacy protection
Four 10/100 Mbps Fast Switch Ports
(Auto-Crossover)
Scalability, extend your network.
Firewall supports Virtual Server
Mapping, DMZ, IP Filter, ICMP
Blocking, SPI
Avoids the attacks of Hackers or
Viruses from Internet
Support 802.1x authenticator,
802.11i (WPA/WPA2, AES), VPN
pass-through
Provide mutual authentication (Client
and dynamic encryption keys to
enhance security
Integrated modem (Annex A) Fully compatible with the fastest
ADSL2+ connections up-to-date.
** Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g, n chipset
used. Actual throughput may vary. Network conditions and environmental factors
lower actual throughput rate. All specifications are subject to change without notice.
6
2 Package Contents
Open the package carefully, and make sure that none of the items listed
below are missing. Do not discard the packing materials, in case of return;
the unit must be shipped back in its original package.
1. WL-347/WL-348 modem/router
2. 220V ~ 240V Power Adapter
3. Quick Install Guide
4. CD (User’s Manual)
5. Warranty card
6. UTP cable
7
3 Product Layout
Port Description
ADSL Connect your telephone/ADSL cable this port
LAN
Connect the cable from your PC’s or network
devices to this port
Power connector Blinks on traffic for specific LAN PORT
Reset button
Power connector
LAN / computer connections
Modem connection
8
Front panel
The front panel describes the corresponding LED indications and port
functionality.
LED Description
POWER Lights up when powered ON. Blinks
on TEST/RESET
Wan Lights up when an ADSL cable is
connected.
Online Lights up when internet connection is
UP.
WLAN Lights up in Blue when WLAN is
enabled. Blinks on traffic
WPS Blinks when WPS mode is on
Lan1 - Lan4 When a lan cable is connected the
corresponding light lights up.
9
4 Network + System Requirements
To begin using the WL-347/WL-348, make sure you meet the following
as minimum requirements:
PC/Notebook.
Operating System – Microsoft Windows XP/2000/VISTA
1 Free Ethernet port.
Wi-Fi card/USB dongle (802.11 b/g/n) – optional.
Annex A, ADSL internet connection.
PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)
Ethernet compatible CAT5 cables.
5 WL-347/WL-348 Placement
You can place the WL-347/WL-348 on a desk or other flat surface, or
you can mount it on a wall. For optimal performance, place your
Wireless Broadband Modem/Router in the center of your office (or your
home) in a location that is away from any potential source of
interference, such as a metal wall or microwave oven. This location
must be close to a power connection and the ADSL/phone line should
not be over 2 meters long.
10
6 Setup LAN, WAN
LAN / computer connections
Modem connection
11
7 PC Network Adapter setup
(
Windows XP
)
Enter [Start Menu] select [Control panel] select [Network].
Select [Local Area Connection]) icon=>select [properties]
12
Select [Internet Protocol (TCP/IP)] =>Click [Properties].
Select the [General] tab.
a. WL-347/WL-348 supports [DHCP] function, please select both [Obtain
an IP address automatically] and [Obtain DNS server address
automatically].
13
8 Bringing up the WL-347/WL-348
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. The WL-347/WL-348 automatically enters the self-test phase.
During self-test phase, the Power LED will blink briefly, and then will be lit
continuously to indicate that this product is in normal operation.
9 Initial Setup WL-347/WL-348
LOGIN procedure
2. OPEN your browser (e.g. Internet Explorer).
3.
Type http://192.168.0.1 in address bar and press [Enter]
14
4. Type user name and password (default is admin/admin).
4. Click OK.
5. You will see the home page of the WL-347/WL-348.
The System status section allows you to monitor the current status of your
router: the UP time, hardware information, serial number as well as firmware
version information is displayed here.
15
LAN settings
The LAN tab gives you the opportunity to change the IP settings of the WL-
347/WL-348.
Click <Apply> at the bottom of this screen to save any changes.
IP address 192.168.0.1. It is the router’s LAN IP address (Your LAN clients
default gateway IP address).
IP Subnet Mask 255.255.255.0 Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree is Disabled by default. If the 802.1d Spanning Tree
function is enabled, this router will use the spanning tree protocol to prevent
network loops.
DHCP Server Enabled by default. You can enable or disable the DHCP server.
When DHCP is disabled no ip-addresses are assigned to clients and you have to
use static ip-addresses. When DHCP server is enabled your computers will be
assigned an ip-address automatically until the lease time expires.
16
Lease Time Forever. In the Lease Time setting you can specify the time period
that the DHCP lends an IP address to your LAN clients. The DHCP will change
your LAN client’s IP address when this time threshold period is reached.
IP Address Pool You can select a particular IP address range for your DHCP
server to issue IP addresses to your LAN Clients.
Note: default IP range 192.168.0.100

192.168.0.199. If you want
your PC(s) to have a static/fixed IP address, then you’ll have to choose
an IP address outside this IP address Pool
Domain Name You can specify a Domain Name for your LAN. Or just keep the
default (SitecomWLxxx).
17
Device Status
View the Broadband modem/router’s current configuration settings. Device
Status displays the configuration settings you’ve configured in the Wizard /
Basic Settings / Wireless Settings section.
18
Internet Status
This page displays whether the ADSL port is connected to an ADSL service
provider. It also displays the router’s WAN IP address, Subnet Mask, and ISP
Gateway as well as MAC address, the Primary DNS. Press Renew button to
renew your WAN IP address.
19
ADSL Status
This page shows the current operation mode, status of your ADSL connection, the
data rate and the quality of your ADSL link.
Operation mode allows manual selection of the ADSL mode.
20
DHCP Client Status
DHCP This page shows all DHCP clients (LAN PCs) currently connected to your
network. The table shows the assigned IP address, MAC address and expiration
time for each DHCP leased client.
Use the Refresh button to update the available information.
21
WL-347/WL-348 Log
View the operation log of the WL-347/WL-348. This page shows the current
system log of the Broadband modem/router. It displays any event occurred after
system start up. At the bottom of the page, the system log can be saved
<Save> to a local file for further processing or the system log can be cleared
<Clear> or it can be refreshed <Refresh> to get the most updated information.
When the system is powered down, the system log will disappear if not saved to
a local file.
22
10 Configuration Wizard
Click Wizard to configure the modem. The Setup wizard will now be displayed;
check that the adsl line is connected and click Next.
Select your country from the Country list. Select your internet provider. Click
Next.
23
Depending on the chosen provider, you may need to enter your user name
and password or hostname in the following window. After you have entered
the correct information, click Next.
Click APPLY to complete the configuration.
24
11 Wireless Settings
You can set parameters that are used for the wireless stations to connect to
this router. The parameters include Mode, ESSID, Channel Number and
Associated Client.
Wireless Function
Enable or Disable Wireless function here. Click Apply and wait for module to
be ready & loaded.
25
Basic Settings
Band Allows you to set the AP fixed at 802.11b or 802.11g mode. You can
also select B+G+N mode to allow 802.11b, 802.11g and 802.11n clients at
the same time.
ESSID This is the name of the wireless signal which is broadcasted. All the
devices in the same wireless LAN should have the same ESSID.
Channel Number The channel used by the wireless LAN. All devices in the
same wireless LAN should use the same channel.
Channel bandwidth
20/40 MHz Allows automatic detection of the operation
bandwidth between 20 and 40 MHz.
Extension channel This is the optional channel for use. Setting the
Bandwidth to 20/40 MHz allows you to use this extension channel as the
secondary channel for doubling the bandwidth of your wireless network.
26
Advanced Settings
This tab allows you to set the advanced wireless options. The options included
are Authentication Type, Fragment Threshold, RTS Threshold, Beacon
Interval, and Preamble Type. You should not change these parameters unless
you know what effect the changes will have on the router.
Fragment Threshold "Fragment Threshold" specifies the maximum size
of a packet during the fragmentation of data to be transmitted. If you set
this value too low, it will result in bad performance.
RTS Threshold When the packet size is smaller then the RTS threshold,
the wireless router will not use the RTS/CTS mechanism to send this
packet.
Beacon Interval is the interval of time that this wireless router
broadcasts a beacon. A Beacon is used to synchronize the wireless
network.
DTIM period
is a countdown mechanism for WLAN Access Points
changing this value will affect your wireless performance and may improve
stability.
27
Preamble Type The “Long Preamble” can provide better wireless LAN
compatibility while the Short Preamble” can provide better wireless LAN
performance.
Broadcast ESSID If you enabled “Broadcast ESSID”, every wireless
station located within the coverage of this access point can discover this
access point easily. If you are building a public wireless network, enabling
this feature is recommended. Disabling “Broadcast ESSID” can provide
better security.
Transmit burst mode if enabled wireless throughput is enhanced, this
may affect compatibility.
802.11g: It is recommended to enable the protection mechanism. This
mechanism can decrease the rate of data collision between 802.11b and
802.11g wireless stations. When the protection mode is enabled, the
throughput of the AP will be a little lower due to a lot of frame-network
that is transmitted.
WMM Wi-Fi Multi Media if enabled supports QoS for experiencing better
audio, video and voice in applications.
28
Security
This Access Point provides complete wireless LAN security functions, included
are WEP, IEEE 802.11x, IEEE 802.11x with WEP, WPA with pre-shared key
and WPA with RADIUS. With these security functions, you can prevent your
wireless LAN from illegal access. Please make sure your wireless stations use
the same security function, and are setup with the same security key.
Disable
When you choose to disable encryption, it is very insecure to operate the WL-
347/WL-348.
29
WEP
When you select 64-bit or 128-bit WEP key, you have to enter WEP keys to
encrypt data. You can generate the key by yourself and enter it. You can
enter four WEP keys and select one of them as a default key. Then the router
can receive any packets encrypted by one of the four keys.
Key Length You can select the WEP key length for encryption, 64-bit or 128-
bit. The larger the key will be the higher level of security is used, but the
throughput will be lower.
Key Format You may select ASCII Characters (alphanumeric format) or
Hexadecimal Digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key.
Key1 - Key4 The WEP keys are used to encrypt data transmitted in the
wireless network. Use the following rules to setup a WEP key on the device.
64-bit WEP: input 10-digits Hex values (in the "A-F", "a-f" and "0-9" range) or
5-digit ASCII character as the encryption keys. 128-bit WEP: input 26-digit
Hex values (in the "A-F", "a-f" and "0-9" range) or 13-digit ASCII characters
as the encryption keys.
30
Click <Apply> at the bottom of the screen to save the above configurations.
You can now configure other sections by choosing Continue, or choose Apply
to apply the settings and reboot the device.
WPA Pre-shared Key
Wi-Fi Protected Access (WPA) is an advanced security standard. You can use
a pre-shared key to authenticate wireless stations and encrypt data during
communication. It uses TKIP or CCMP (AES) to change the encryption key
frequently. So the encryption key is not easy to be cracked by hackers. This is
the best security available.
31
WPA-Radius
Wi-Fi Protected Access (WPA) is an advanced security standard. You can use
an external RADIUS server to authenticate wireless stations and provide the
session key to encrypt data during communication. It uses TKIP or CCMP
(AES) to change the encryption key frequently. Press Apply button when you
are done.
32
ACL
This wireless router supports MAC Address Control, which prevents
unauthorized clients from accessing your wireless network.
Enable wireless access control Enables the wireless access control function
Adding an address into the list Enter the "MAC Address” of the wireless
station to be added and then click "Apply". The wireless station will now be
added. If you are having any difficulties filling in the fields, just clear the MAC
Address.
33
WPS
Wi-Fi Protected Setup (WPS) is the simplest way to establish a connection
between the wireless clients and the wireless router. You don’t have to select
the encryption mode and fill in a long encryption passphrase every time when
you try to setup a wireless connection. You only need to press a button on
both wireless client and wireless router, and WPS will do the rest for you.
The wireless router supports two types of WPS: WPS via Push Button and
WPS via PIN code. If you want to use the Push Button, you have to push a
specific button on the wireless client or in the utility of the wireless client to
start the WPS mode, and switch the wireless router to WPS mode. You can
simply push the WPS button of the wireless router, or click the ‘Start to
Process’ button in the web configuration interface. If you want to use the PIN
code, you have to know the PIN code of the wireless client and switch it to
WPS mode, then fill-in the PIN code of the wireless client through the web
configuration interface of the wireless router.
WPS Check the box to enable WPS function and uncheck it to disable the
WPS function.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sitecom WL-585 - 348 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sitecom WL-585 - 348 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info