Handleiding Sitecom DC-207 (pagina 43 van 43) (Engels)

527724

Verklein

Vergroot

Pagina terug

1/43

Pagina verder

Broadband Router

DC-207

Full Manual

The contents of this publication may not be reproduced in any part or as

a whole, stored, transcribed in an information retrieval system, trans-

lated into any language, or transmitted in any form or by any means,

mechanical, magnetic, electronic, optical, photocopying, manual, or

otherwise, without the prior written permission.

Trademarks

All product, company, brand names are trademarks or registered trade-

marks of their respective companies. They are used for identification

purpose only. Specifications are subject to be changed without prior

notice.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for

a Class B digital device pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against radio inter-

ference in a commercial environment. This equipment can generate, use

and radiate radio frequency energy and, if not installed and used in

accordance with the instructions in this manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause interference, in which case the user, at

his own expense, will be required to take whatever measures are neces-

sary to correct the interference.

CE Declaration of Conformity

This equipment complies with the requirements relating to electromag-

netic compatibility, EN 55022/A1 Class B

1. Introduction

Congratulations on your purchase of this outstanding broadband router.

This product is specifically designed for Small Office and Home Office

needs. It provides a complete SOHO solution for Internet surfing, and is

easy to configure and operate even for non-technical users. Instructions

for installing and configuring this product can be found in this manual.

Before you install and use this product, please read this manual carefully

for fully exploiting the functions of this product.

1.1 Functions and Features

Router Basic functions

Broadband modem and NAT Router

Connects multiple computers to a broadband (cable or DSL) modem or

an Ethernet router to surf the Internet.

Auto-sensing Ethernet Switch

Equipped with a 4-port auto-sensing Ethernet switch.

Printer sharing

Embedded a print server to allow all of the networked computers to

share one printer.

Built-in USB(parallel) host to connect to USB (parallel)printer for printer

sharing

WAN type supported

The router supports some wan types, Static ,Dynamic, PPPOE ,PPTP ,

Dynamic IP with Road Runner.

Firewall

All unwanted packets from outside intruders are blocked to protect your

Intranet.

DHCP server supported

All of the networked computers can retrieve TCP/IP settings automati-

cally from this product.

Web-based configuring

Configurable through any networked computer’s web browser using

Netscape or Internet Explorer.

Virtual Server supported

Enables you to expose WWW, FTP and other services on your LAN to be

accessible to Internet users.

User-Definable Application Sensing Tunnel

User can define the attributes to support the special applications requir-

ing multiple connections, like Internet gaming, video conferencing,

Internet telephony and so on, then this product can sense the applica-

tion type and open multi-port tunnel for it.

DMZ Host supported

Lets a networked computer be fully exposed to the Internet; this func-

tion is used when special application sensing tunnel feature is insuffi-

cient to allow an application to function correctly.

Statistics of WAN Supported

Enables you to monitor inbound and outbound packets

Security functions

Packet filter supported

Packet Filter allows you to control access to a network by analyzing the

incoming and outgoing packets and letting them pass or halting them

based on the IP address of the source and destination.

Domain Filter Supported

Let you prevent users under this device from accessing specific URLs.

URL Blocking Supported

URL Blocking can block hundreds of websites connection by simply a

keyword.

VPN Pass-through

The router also support vpn pass-through.

Advanced functions

System time Supported

Allow you to synchronize system time with network time server.

E-mail Alert Supported

The router can send its info by mail.

Dynamic dns Supported

At present,the router has 3 ddns.dyndns,TZO.com and dhs.org.

SNMP Supported

Because SNMP this function has many versions, anyway, the router

supports V1 and V2c.

Routing Table Supported

Now, the router supports static routing and two kinds of dynamic routing

RIP1 and RIP2.

Schedule Rule supported

Customers can control some functions, like virtual server and packet

filters when to

Access or when to block.

Other functions

UPNP (Universal Plug and Play)Supported

The router also supports this function. The applications: X-box, Msn

Messenger.

2. Hardware installation

2.1 Panel Layout

2.1.1 Front Panel

M1&M2 System status indicators, Green. M1 is flashed once per

second to indicate system is alive. When system is

busy, M2 is lighted.

WAN/Link Link status indicators, Green. The LED flickers when the

corresponding port is sending or receiving data

LAN/Speed

WAN/Speed

10/100 status indicators, Green. The LED flickers when

the corresponding port is transmitting or receiving data

in 10 or 100Mbps.

LAN/Link Link status indicators, Green. The LED flickers when the

corresponding port is sending or receiving data

RESET To reset system settings to factory defaults, please

follow the steps:

Power off the device,

Press the reset button and hold,

Power on the device,

Keep the button pressed about 5 seconds,

Release the button,

Watch the M1 and M2 LEDs, they will flash 8 times and

then M1 flash once per second.

Appendix B – Troubleshooting

Reset to factory Default

There are 2 methods to reset to default.

• Restore with RESET button

First, turn off the router and press the RESET button in. And

then, power on the router and hold the RESET button down until

the M1 and or M2 LED (or Status LED) start flashing, then move

away the hand. If LED flashes about 8 times, the RESTORE proc-

ess is completed. However, if LED flashes 2 times, repeat.

• Restore directly when the router power on

First, hold the RESET button about 5 seconds(M1 will start flash-

ing about 5 times),move away the hand. The RESTORE process

is completed.

Sitecom DC-207 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Sitecom DC-207

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info