28538
129
Verklein
Vergroot
Pagina terug
1/176
Pagina verder
Simrad SH80
High frequency fishery sonar
Operator manual
M A X I M I Z I N G Y O U R P E R F O R M A N C E A T S E A
www.simrad.com
850-164385 / Rev.C
SH80
High frequency fishery sonar
Operator manual
WARNING
The sonar must never be powered up when the ship is
in dry dock. The transducer will be damaged if it
transmits in open air. To prevent inadvertent use of the
sonar, pull out the mains plug on the Sonar Processor
Unit whenever the vessel is in dry dock.
About this document
Rev Date Written by Checked by Approved by
Rev.C
11. 02.05 RBr SØJ OBG
Updated for software version 1.2.X
© 2005 Simrad AS
ISBN 82-8066-007-0
All rights reserved. No part of this work covered by the copyright hereon may be
reproduced or otherwise copied without prior permission from Simrad AS.
The information contained in this document is subject to change without prior notice.
Simrad AS shall not be liable for errors contained herein, or for incidental or
consequential damages in connection with the furnishing, performance, or use of this
document.
Simrad AS
Strandpromenaden 50
Box 111
N-3191 Horten
Telephone: +47 33 03 40 00
Facsimile: +47 33 04 29 87
M A X I M I Z I N G Y O U R P E R F O R M A N C E A T S E A
Operator manual
I
850-164385 / Rev.C
Sections
1. System description
This chapter provides a brief introduction to the SH80, and defines the main
units. Refer to page 1.
2. Display modes
This chapter defines the available operational display modes. Refer to page
13.
3. Sonar Operating Panel
The main functions of the SH80 is controlled by a dedicated keyboard; the
operating panel. The controls and functions of this unit is described. Refer
to page 23.
4. Operation
This chapter provides the basic knowledge on how to operate the SH80
sonar. Refer to page 36.
5. Menu description
Operation of the SH80 sonar is also menu based. and the menus will
automatically adjust to your current operational modes. This chapter
explains all the menus, and referes directly to the relevant parameters. Refer
to page 56.
6. Parameters
All the operational functions of the SH80 sonar are controlled by the
parameters accessed from the menu system. In this chapter, all the
parameters are described and explaind. They are listed in alphabetical
order. Refer to page 83.
7. Maintenance
This chapter explains how to perform the on-board maintenance on the
SH80 sonar. Refer to page 150.
Simrad SH80
II
850-164385 / Rev.C
SYSTEM DESCRIPTION 1......................................
Introduction 1..................................................
System overview 2..............................................
Main units 2..............................................
Wheelhouse units 2........................................
Sonar room units 3.........................................
System diagram 4...............................................
Options 6......................................................
General 6................................................
Multiple-frequency 6.......................................
Scientific output 6.........................................
Functional description 7..........................................
Introduction 7.............................................
Functional principles 7......................................
Stabilization system 9......................................
Reception 9...............................................
Transmission 10............................................
Peripheral equipment 12...........................................
DISPLAY MODES 13.............................................
Introduction 13..................................................
Bow Up 14......................................................
North Up 15.....................................................
True Motion 16..................................................
180°/Audio 17...................................................
270°/Vertical 18..................................................
Bow Up / Vertical 19..............................................
True Motion/Vertical 20...........................................
Dual 1 21.......................................................
Dual 2 22.......................................................
SONAR OPERATING PANEL 23..................................
Introduction 23.............................................
Main switch 24.............................................
Symbol 25................................................
Mode 27..................................................
Gain 28...................................................
Range 29..................................................
Cursor 30.................................................
Train 32..................................................
Operator manual
III
850-164385 / Rev.C
Tilt 34....................................................
Various 35.................................................
OPERATION 36..................................................
Introduction 36..................................................
Maintaining the sonar 37...........................................
Maintenance procedures 37...................................
Important when docking the vessel 37...........................
Start and stop procedures 38........................................
Start procedure 38..........................................
Stop procedure 39...........................................
Dry-docking safety measures 40...............................
Menu operation 41................................................
Introduction 41.............................................
Screen presentations 42......................................
Menu structure 44..........................................
Menu buttons 45............................................
Selecting a new parameter value 46.............................
Stored parameters 48........................................
Visual aids 49...................................................
Common information on the display 49.........................
Moving the boundary lines 49.................................
Cosmetics 50....................................................
Installation of options 53...........................................
On-line help 55..................................................
MENU DESCRIPTIONS 56.......................................
Introduction 56..................................................
Active menus 57.................................................
Overview 57...............................................
Horizontal 58..............................................
Vertical 59................................................
Display 60................................................
Setup 61..................................................
Objects 62.................................................
Temporary menus 63..............................................
Cosmetics 64..............................................
Store/Recall 65.............................................
System test 66.............................................
Sort Modes 68.............................................
Simrad SH80
IV
850-164385 / Rev.C
Pop-up menus 69.................................................
View pop-up 70............................................
Object pop-up 72...........................................
View menus 74..................................................
GeoView 75...............................................
VerticalView 76............................................
CatchView 77..............................................
Messages 78.....................................................
Message categories 78.......................................
Warnings 79...............................................
Operator alarms 80..........................................
System alarms 81...........................................
Errors 82..................................................
PARAMETERS 83.................................................
About parameter dialogues and help 83...............................
Alphabetical list 84...............................................
About 85..................................................
Beam 86..................................................
Bearing (Horizontal) 88......................................
Bearing (Display) 90........................................
Bearing (Vertical) 91........................................
Colour Threshold 92........................................
Colours 93................................................
Data Source 94.............................................
Dead Reckoning 95.........................................
Default Setting 96..........................................
Direction Indicator 97.......................................
Edit Gear (Purse) 98.........................................
Edit Gear (Trawl) 99........................................
Edit School 101.............................................
External Synchronization 102..................................
Fish Alarm 103..............................................
Frequency 104..............................................
Gain 105...................................................
Gear 106...................................................
Heading 107................................................
Inspect Object 108...........................................
Language 109...............................................
Menu 110..................................................
Operator manual
V
850-164385 / Rev.C
Message Bar 111............................................
Mode 112..................................................
Mode Buttons 113...........................................
Movements 114.............................................
Noise Level 115.............................................
Palette 116.................................................
Panel Backlight 117..........................................
PP Filter 118...............................................
Pulse Form 119.............................................
Range 121..................................................
Range (Catch View) 122......................................
RCG (Reverberation Controlled Gain) 123........................
Recall 124..................................................
Recall Mode 124............................................
Ruler 125..................................................
Scale 126..................................................
School 127.................................................
Scientific Output (Option) 128.................................
Search Sector 129............................................
Search Step 130.............................................
Slant Range/True Range 131...................................
Speed 132..................................................
Stabilizer 133...............................................
Status 134..................................................
Store 135..................................................
Store Mode 135.............................................
Target Track 136.............................................
Tilt 137....................................................
Time and Date 138...........................................
Track History 139............................................
Track Window 140...........................................
Transducer 141..............................................
TVG (Time Variable Gain) 142.................................
Tx Power 143...............................................
Units 144..................................................
User Setting 145.............................................
Wind Direction 146..........................................
Wind Speed 147.............................................
Zoom 148..................................................
Zoom Scale 149.............................................
Simrad SH80
VI
850-164385 / Rev.C
ON-BOARD MAINTENANCE 150..................................
Introduction 150..................................................
Preventive maintenance schedule 151..................................
Wheelhouse units 152..............................................
Cleaning 152...............................................
Dust filter 152..............................................
Transceiver Unit 154...............................................
Dust filter 154..............................................
Replacing fuses 154..........................................
Hull unit 156.....................................................
General 156................................................
Hull unit familiarization 157...................................
Docking the vessel 158.......................................
Cleaning the transducer 160....................................
Hoist motor overload protection 161.............................
Emergency hoisting and lowering 162............................
Lubrication of the Hull Unit 163................................
Simrad SH80
20
850-164385 / Rev.C
True Motion/Vertical
When the True Motion/Vertical mode is selected, the picture is
divided into three sections; where the left side is a True motion
presentation similar to the true motion presentation previously
described.
The upper part on the right-hand side is a Catch data
presentation, while the lower part is a 60 degrees Vertical slice
presentation.
Related topics
Cosmetics, page 50
Simrad SH80
52
850-164385 / Rev.C
Sonar display with
Vertical Depth
dividers (G), Track
history with Minute
Markers (H) and
Bow Marker (I)
enabled.
(CD15014C)
N
S
W
E
100 m
200 m
300 m
400 m
G
H
I
(G) The Depth dividers are horizontal dotted lines used to
visualize the depth steps in the vertical slices.
(H) The Minute markers are shown as small circles on the
track history of the ship.
(I) The Bow Marker is heading marker. It is a dotted line drawn
from the bow of your own ship in the same direction as the
vessel’s current heading.
Related topics
Track History, page 139
Wind Direction, page 146
Cosmetics, page 64
Operation
53
850-164385 / Rev.C
Installation of options
The following options can be installed on the SH80 sonar:
Triple- or multiple-frequency
Scientific output
Note that all options are pre-programmed into the standard
sonar version, and that Simrad offer a 1 month free test period
for certain options. When ordering a permanent option
installation, a code word will be released from Simrad.
For a free test, or permanent option installation, use the
following procedure:
1. Select the Setup menu.
2. Press the Test button to activate the System test menu.
3. Press the Installation Menu button.
4. Observe that the installation menu bar is shown on the top
of the screen.
5. Press Options on the menu bar.
6. Select Install Options to activate the Install options
parameter dialogue.
The following parameters are available in the Install options
dialogue.
HWID - This field displays the unique 12-character Hardware
Identification code. This code is different for each SH80 sonar.
Simrad uses this code to generate the 32-characters code word
used for a permanent option installation.
Try - A number of buttons, where each will start the 1 month
free test period for the chosen option.
Menu descriptions
69
850-164385 / Rev.C
Pop-up menus
The pop-up menus are accessed using the View and Object
buttons on the Sonar Operating Panel, or the middle and right
mouse buttons if an optional mouse is installed. Each button
will present a small menu, and it appears at the cursor’s current
location. To make a selection, use the trackball and the Select
button, or the mouse.
Topics
View, page 70
Object, page 72
Related topics
View and Object buttons, page 30
Parameters
119
850-164385 / Rev.C
Pulse Form
The Pu lse Form is accessed from the Horizontal and Vertical
menus.
The Pu lse Form parameter dialogue is used to select the form of
the transmitter pulse. This could either beCW (Continuous Wave)
with different pulse lengths, or FM (Frequency Modulation) with
different pulse lengths and number of frequencies.
Range
(meters)
CW
Pulse length (ms)
AUTO
mode (ms)
FM
Pulse length(ms)
Short Normal Long Short Normal Long
50 0.4 0.8 1.2 FM 6.4 3.2 6.4 6.4
75 0.6 1.2 2.0 FM 6.4 3.2 6.4 6.4
100 0.8 1.5 2.5 FM 6.4 3.2 6.4 6.4
150 1.2 2.5 4.0 FM 6.4 3.2 6.4 6.4
200 1.5 3.0 5.0 FM 12.8 3.2 12.8 12.8
300 2.3 4.5 8.0 FM 12.8 3.2 12.8 12.8
400 3.0 6.0 10 FM 25.6 3.2 12.8 25.6
500 3.8 7.5 13 FM 25.6 3.2 12.8 25.6
600 4.5 9.0 15 FM 25.6 3.2 12.8 25.6
750 6.0 12.0 20 CW 20 3.2 12.8 25.6
1000 7.5 15.0 30 CW 30 3.2 12.8 25.6
1200 9.0 18.0 30 CW 30 3.2 12.8 25.6
1500 11.3 22.5 30 CW 30 3.2 12.8 25.6
2000 15.0 30.0 30 CW 30 3.2 12.8 25.6
129

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Simrad SH80 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Simrad SH80 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Simrad SH80

Simrad SH80 Gebruiksaanwijzing - Espanôl - 180 pagina's

Simrad SH80 Gebruiksaanwijzing - Norsk - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info