634385
3
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
AP70/AP80 | Addendum for sw release 1.2
Addendum for AP70/AP80
sw release 1.2
| 1
simrad-yachting.com
*988-10674-001*
This addendum documents new features that are included in AP70/AP80 software update 1.2,
including new features for the AP70/80 and for the FU80 Remote control.
The addendum also includes additions and updates to the existing AP70/AP80 Installation
manual (part no 988-10197-002). These updated are included in the new release of the
AP70/80 Installation manual (part no 988-10197-003).
New AP70/80 features
Feature AP70 AP80 Refer page
Track steering x 2
Backup navigator alarm x 5
Track offset x x 6
S-turns x x 6
Toe angle x x 7
Minimum rudder x x 8
Pendulum feature x x 9
New FU80 features
Feature Refer page
Follow-Up dodge 10
Follow-Up on Command 10
Enabling the new FU80 features 10
Additions to AP70/80 Installation manual
New section Refer page
SG05 PRO 11
Corrections to current AP70/80 Installation manual (988-10197-002)
Section reference in current manual Refer page
AP80, advanced system example 13
Externally powered solenoids 14
Rudder Feedback 15
External feedback pot.meter input 16
External Take command 16
AP70 and AP80 Connector pinouts 17
Supported data 17
2 |
AP70/AP80 | Addendum for sw release 1.2
New AP70/80 features
Track steering
With AP70/80 software release 1.2 the AP80 system and a Simrad CS68 ECDIS forms a fully
type approved Track steering system according to IEC62065 ed.1.
The routes are planned on and commanded by an ECDIS (Electronic Chart Display
Information System). When the system is installed and configured as described in this section,
you can start a route on the ECDIS and make the AP80 automatically keep the vessel on this
route.
The Track feature is only available after unlocking it using a key obtained from Navico. The
unlock mechanism resides in the autopilot computer board. Only after enabling this feature,
the autopilot system can form part of a certified track control system.
Refer to the Type approval certificate on the product web site for details:
pro.simrad-yachting.com.
The following requirements and limitations apply:
• The autopilot system must comprise of at least one AP80, and at least one of the following
autopilot computers: AC80A, AC80S or AC85
• The ECDIS system must be connected to the AP80 system via an SI80
• A valid unlock key must be obtained from Navico
• In a system with multiple autopilot computer boards where track feature shall be redundant,
each autopilot computer board needs a separate unlock key
The Track feature will remain unlocked after restarting the system and after later software
upgrades.
¼ Note: A factory reset of the autopilot computer will delete the unlock key and it must be re-
entered
Wiring the AP80 to an ECDIS system
Connect the NMEA 0183 serial line from the ECDIS to Ch. 3 NMEA terminal on the SI80 board.
ECDIS SYSTEM
RX
Rx_A
Rx_B
Tx _A
Tx_B
NMEA 0183
SI80 BOARD
SI80, AC80A, AC80S
or AC85 COMPUTER
SERIAL LINE/
NMEA 0183
The green LED at the NMEA terminal is living when serial data is received.
RX1
| 3
AP70/AP80 | Addendum for sw release 1.2
Unlocking the Track steering feature
A unlock key must be obtained from Navico to unlock the Track steering feature. Contact a
Simrad Sales office for further information.
1. Navigate to the Device list dialog, and select the autopilot computer where you want to
install the feature
2. Press the Rotary knob or the Right arrow key to bring up the computer’s information dialog
3. Select Add feature to display the Unlock feature dialog
4. Select the input field, and press the Rotary knob or the Right arrow key to bring up the
onscreen keyboard
5. Enter the entire unlock key as received from Navico. The string is case sensitive, but the
dashes (“ – “) can be omitted
6. Select Enter in the onscreen keyboard to confirm your entry and to remove the keyboard
- The Unlock feature dialog will confirm that the feature is unlocked
7. Select Close or press the Left arrow key to close the dialog
After unlocking the Track steering feature it will continue to be available after restarting the
system and after later software upgrades. However, a factory reset of the autopilot computer
will delete the unlock key and it must be re-entered.
Enable the Track steering feature
After the Track feature is unlocked, it must be enabled by setting the Track system option to
Track as shown below:
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Simrad AP70 Autopilot bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Simrad AP70 Autopilot in de taal/talen: Engels als bijlage per email.

De handleiding is 2,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Simrad AP70 Autopilot

Simrad AP70 Autopilot Gebruiksaanwijzing - English - 72 pagina's

Simrad AP70 Autopilot Snelstart handleiding - English - 6 pagina's

Simrad AP70 Autopilot Gebruiksaanwijzing - English - 84 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info