648106
33
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
Doona Base
User Guide
Group 0+
4-35 lbs (1.8-15.8 kg)
Language: English
KEEP THIS USER GUIDE in its storage
position at the back of the product.
THE NEXT GENERATION CAR SEAT / DOONA BASE
4
01/ Safety Warnings ..........................................................................7
02/ Certications ..............................................................................8
03/ Registration & Recall .................................................................9
04/ Use Requirements ...................................................................10
05/ Product Overview ...................................................................11
06/ Use in the Vehicle ...................................................................12
6.1. Vehicle Compatibility ............................................................12
6.2 Vehicle Seating Positions .....................................................13
6.3 Incompatible Vehicle Seat Belts .........................................15
07/Installing the Doona Base .......................................................16
7.1 Recline Angle and Leveling ..................................................16
7.2 LATCH Connectors ................................................................17
7.3 LATCH Installation .................................................................16
7.4 Lap-Shoulder Belt Installation ...............................................18
7.5 Lap Belt Installation ................................................................21
7.6 Uninstalling the Base ..............................................................26
Table of
contents.
5
TABLE OF CONTENTS
08/ Installing the Doona Infant Car Seat with a Base ................26
09/ Removing the Doona Infant Car Seat
from the Doona Base ....................................................................28
10/ Care Instructions ......................................................................32
11/ Two-Year Warranty .................................................................34
12/ Warranty Card .........................................................................36
THE NEXT GENERATION CAR SEAT / DOONA BASE
6
Congratulations for choosing Simple Parenting’s Doona Infant Car Seat
and Doona Base for your child’s safety.
In order to protect your child, the Doona Infant Car Seat must always
be used and installed as described in this user guide.
IMPORTANT! Keep instructions for future use. Read carefully before use.
Your child’s safety may be affected if you do not follow these instruc-
tions and the instructions provided on the car seat and the base.
Keep this user guide in the compartment located at the bottom of the
Doona Base
7
01 / Safety Warnings.
SAFETY WARNINGS
Read all instructions in this user guide and the instructions
in your vehicle manual before installing the Doona Base.
Do not make any alterations or additions to the Doona
Base. Only the manufacturer is permitted to make
modications to the Doona Base.
In case of a car accident violent stresses may occur. If
the product is involved in a car accident we recommend
to stop using the product.
Do not use this product if any components are broken
or missing.
Do not leave loose objects (e.g. books, bags, etc.) in the
back of a vehicle. In the event of a sudden stop, loose
objects will keep moving, potentially causing serious injuries.
Never leave your child unattended.
NEVER use on a passenger seat with an
active frontal airbag!
It is recommended to cover up the
Doona Base when the car is parked in the sun, as plastic
and metal parts may become extremely hot.
WARNING
THE NEXT GENERATION CAR SEAT / DOONA BASE
8
02 / Certications.
The Doona Base conforms to all applicable Federal Motor Vehicle
Safety Standards. This Restraint is certied for Use in Motor Vehicles.
The Doona Base has been designed, tested and certied according to
US safety standards and regulations.
9
USE REQUIREMENTS
03 / Registration
& Recall.
Child restraints could be recalled for safety reasons.
You must register this product in order to allow the manufacturer to
reach you in case of a recall.
Fill in the attached Registration Card with your name, address, the
product’s serial number and manufacturing date and mail it to:
HAPPY KIDZ, LLC
168 East Main Street
Prospect Park, NJ 07508
Or call Customer Service at: (862) 240 1755.
Or register this product on-line at:
www.simpleparenting.co/register
For recall information, call the US Government’s Vehicle Safety Hotline
1-888-327-4236 (TTY: 1-800-424-9153), or go to www.NHTSA.gov
Also check the Simple Parenting website at:
www.simpleparenting.co
THE NEXT GENERATION CAR SEAT / DOONA BASE
10
04 / Use
Requirements.
The Doona Base has been tested and certied in combination with
the Doona Infant Car Seat.
• Use the Doona Base only with the Doona Infant Car Seat.
• For Rear-Facing use only.
• For use with children weighing 4-35 lbs (1.8-15.8 kg).
11
05 / Product
Overview.
PRODUCT OVERVIEW
1. Base anchor points
2. Recliner knob
3. Vehicle belt guides
4. Belt lock-offs
5. LATCH adjuster strap
6. LATCH adjuster strap
release button
7. LATCH connector release
button
8. LATCH connector
9. Recline level indicator
10. Base release button
1 2 3
4
5678910
THE NEXT GENERATION CAR SEAT / DOONA BASE
12
NEVER place a rear-facing child restraint in the front seat
of a vehicle with an active frontal air bag. An airbag
hitting the child restraint can cause serious injuries to
your child, possibly resulting in death. For vehicle seats
with side airbags, please observe the instructions in your
vehicle manual.
WARNING! Read all instructions in this user guide and
the child restraint installation instructions in your vehicle
manual before using the Doona Base. Incorrect
installation can cause DEATH or SERIOUS INJURY.
06 / Use in the
Vehicle.
E
6.1. Vehicle Compatibility
WARNING
13
NEVER allow others to use or install the Doona Base
before they have read all instructions in this user guide
and the child restraint installation instructions in your
vehicle manual.
The Doona Base may only be
used on forward facing seats,
either on the passenger seat or
on the back seats.
NEVER use a different installation
method than the one described
in this user guide.
Secure your child in an infant car seat for every journey!
NEVER install the Doona Infant Car Seat, with or without
the Doona Base, on a rear-facing vehicle seat or on a
side-facing vehicle seat.
USE IN THE VEHICLE
6.2. Vehicle Seating Positions
WARNING
THE NEXT GENERATION CAR SEAT / DOONA BASE
14
NEVER place a rear-facing child restraint in the front seat of
a vehicle with an active frontal air bag. An airbag hitting the
child restraint can cause serious injuries to your child, possibly
resulting in death. For vehicle seats with side airbags, please
observe the instructions in your vehicle manual.
Seat with active frontal airbag
Forward facing
Seat with lap/shoulder belt
Seat with lap belt only
Rear-facing seat
Side-facing seats
yes
yes
yes
no
no
no
15
NEVER install the Doona Infant Car Seat with the Doona Base in a
vehicle with the following types of vehicle belts. Check your vehicle
manual for information about the vehicle’s seat belt type.
1. Vehicle belts that are attached to the door in any way, or that
move along a track automatically to restrain the passenger
when the door is closed.
2. A lap belt with a motorized shoulder belt.
3. Lap belts with an Emergency Locking Retractor (ELR). These lap
belts stay loose and can move until locking in a crash or sudden stop.
4. Inatable seat belts or seat belt airbags.
5. Lap belts forward of the seat crease, or bight.
6. Combination Lap-shoulder belt with two ELRs. Lap-shoulder belts
that have a separate non-locking retractor each for the lap
section and the shoulder section.
6.3. Incompatible Vehicle Seat Belts
1
4
2
5
3
6
WARNING
USE IN THE VEHICLE
THE NEXT GENERATION CAR SEAT / DOONA BASE
16
07 / Installing the
Doona Base.
• Before you install the Doona Base,
park the car on a level surface.
• To adjust the level of the base, use the
recliner knob (#2).
• For leveling the Doona Base, turn
the recliner knob (#2) clockwise or
counterclockwise, as needed (a).
• The base is leveled when the white
markers on the recline level indicators
(#9) on both sides are completely
within the green area (b).
• If you cannot level the base properly,
please follow these steps:
– Try installing the Doona Base on a
different seat. OR
Place a rolled soft object (e.g. towel or
pool noodle) in the vehicle seat bight
and place the base on the rolled soft
object to level the base (c).
IMPORTANT: If a rolled soft object is
required, ensure that the recliner knob
(#2) on the base remains on its lowest
position (turned all the way clockwise).
7.1. Recline Angle and Leveling
b.
a.
c.
17
INSTALLING THE DOONA BASE
7.2. LATCH Connectors
To release the LATCH connector (#8)
from its storage slot in the Doona
Base or from the LATCH anchor
points in the vehicle, press and hold
the red LATCH connector release
button (#7) and pull it out.
To store the LATCH connectors (#8),
push them into the storage slots in
the base until they click into place.
The Doona Base can be installed in the vehicle either with the LATCH
system or with the vehicle’s belt.
LATCH stands for Lower Anchors and Tethers for Children; these
anchors are specically designed for car seats installation.
Since 2002, LATCH connectors are required by law in the USA for all
vehicles.
Check your vehicle manual to ensure that the vehicle is equipped with
LATCH anchor points.
WARNING!
LATCH connectors should always be stored in their storage
slots in the base when not in use.
THE NEXT GENERATION CAR SEAT / DOONA BASE
18
The Doona Base must be properly secured in the vehicle
before installing the Doona Infant Car Seat on it.
Before using the Doona Base in the vehicle, you must rst
adjust its level. The base’s level can be adjusted only as
described in this user guide.
Ensure that the Doona Base is not raised from the front
edge of the vehicle seat. In the event of an accident, it
might disrupt the correct functioning of the base.
The Doona Base can be installed in the vehicle either
with the LATCH system or with the vehicle’s belt. DO NOT
attempt to install the Doona Base using both the LATCH
system and the vehicle’s belt, as it is not approved, and
it might disrupt the correct functioning of the Doona
Infant Car Seat and the Doona Base.
The Doona Base can be installed with the LATCH system
only in vehicles equipped with LATCH anchor points.
Before attempting to install the
Doona Base in the vehicle using
the LATCH system, ensure that the
vehicle is equipped with LATCH
anchor points.
7.3. LATCH Installation
WARNING
19
Step 1: Release the LATCH connectors (#8) from their storage slots in
the Doona Base - press and hold the red LATCH connector release
buttons (#7) and pull the LATCH connectors out (a).
Step 2: Lengthen the LATCH adjuster strap (#5) - press and hold the
LATCH adjuster strap release button (#6), then pull the strap (b).
Step 3: Place the Doona Base in the desired location on the vehicle seat.
Insert the base’s LATCH connectors into the vehicle’s LATCH anchor
points, then press them until you hear a click sound (c).
Step 4: Tighten the LATCH adjuster strap (#5) - while pressing the Doona Base
down into the seat and pulling the LATCH adjuster straps up (d).
a.
c.
b.
d.
INSTALLING THE DOONA BASE
THE NEXT GENERATION CAR SEAT / DOONA BASE
20
Ensure proper installation of the Doona Base:
• Ensure that the LATCH straps are tight and the base is secure. The
base is secure when it moves less than 1 inch (2.5 cm) side to side or
back to front.
• The base is leveled when the white
markers on the recline level indicators
(#9) on both sides are completely
within the green area.
21
7.4. Lap-Shoulder Belt Installation
Before installing the Doona Base in the vehicle, ensure
that the vehicle seat belts are compatible.
The Doona Base must be secured in the vehicle before
installing the Doona Infant Car Seat in it.
Before using the Doona Base in the vehicle, you must rst
adjust its level. The base’s level can be adjusted only as
described in this user guide.
Ensure that the base is not raised from the front edge of
the vehicle seat. In the event of an accident it might
disrupt the correct functioning of the base.
The Doona Base can be installed in the vehicle either
with the LATCH system or with the vehicle’s belt. DO NOT
attempt to install the Doona Base using both the LATCH
system and the vehicle’s belt, as it is not approved, and
it might disrupt the correct functioning of the Doona
Infant Car Seat and the Doona Base.
When installing the Doona Base with a lap-Shoulder
belt, ensure LATCH connectors are always stored in their
storage slots in the base.
WARNING
INSTALLING THE DOONA BASE
THE NEXT GENERATION CAR SEAT / DOONA BASE
22
WARNING!
DO NOT lock both of the blue lock-offs onto the vehicle
seat belt!
Step 1: Place the Doona Base in the desired location on the vehicle
seat.
Step 2: Pull the vehicle’s Lap-Shoulder belt. Ensure it is not twisted.
Step 3: Route the vehicle seat belt under and through the rst vehicle
belt guide (#3), then through the second vehicle belt guide (#3) (a).
Step 4: Engage the vehicle seat belt buckle tongue in the vehicle seat
buckle (b).
Step 5: Tighten the lap belt section by pulling up the shoulder section of
the vehicle seat belt (c).
Step 6: Once the vehicle seat belt has been tightened, lock the
blue lock-off clip to prevent the shoulder sliding (d). Make sure
to only use the lock-off placed opposite from the side where the
vehicle belt is engaged into the vehicle seat buckle.
Note: The blue lock-off will not make a click sound when locked.
23
Ensure proper installation of the Doona Base:
• Ensure that the seat belt strap is tight and the base is secured. The
base is secured when it moves less than 1 inch (2.5 cm) side to side or
back to front.
• The base is leveled when the white
markers on the recline level indicators
(#9) on both sides are completely
within the green area.
a.
c.
b.
d.
INSTALLING THE DOONA BASE
THE NEXT GENERATION CAR SEAT / DOONA BASE
24
7.5. Lap Belt Installation
Before installing the Doona Base in the vehicle, ensure
that the vehicle seat belts are compatible (see chapter
6.3.).
For lap belt installation, check your vehicle manual for
information on how to lock your vehicle seat belt system.
The Doona Base must be secured in the vehicle before
installing the Doona Infant Car Seat on it.
Before using the Doona Base in the vehicle, you must rst
adjust its level. The base’s level can be adjusted only as
described in this user guide.
Ensure that the base is not raised from the front edge of
the vehicle seat. In the event of an accident it might
disrupt the correct functioning of the base.
The Doona Base can be installed in the vehicle either
with the LATCH system or with the vehicle’s belt. DO NOT
attempt to install the Doona Base using both the LATCH
system and the vehicle’s belt, it is not approved and
might disrupt the correct functioning of the Doona Infant
Car Seat and the Doona Base.
When installing the Doona Base with a lap belt, ensure
LATCH connectors are always stored in their storage slots
in the base.
WARNING
25
Step 1: Place the Doona Base in the desired location on the vehicle seat.
Step 2: Lock BOTH belt lock-offs (#4) on both sides of the Doona Base
(a). The lock-offs are NOT in use when installing Doona Base with a lap
belt.
Step 3: Pull the vehicle’s lap belt. Ensure it is not twisted.
Step 4: Route the vehicle seat belt under and through the rst vehicle
belt guide (#3), and through the second vehicle belt guide (#3) (b).
Step 5: Engage the vehicle seat belt buckle tongue in the vehicle seat
buckle (c).
Step 6: Tighten the lap belt (d).
a.
c.
b.
d.
INSTALLING THE DOONA BASE
THE NEXT GENERATION CAR SEAT / DOONA BASE
26
WARNING!
DO NOT use the blue lock-offs to lock the vehicle seat belt
straps when installing the Doona Base with a lap belt.
Ensure proper installation of the Doona Base:
• Ensure that the seat belt strap is tight and the base is secured. The
base is secured when it moves less than 1 inch (2.5 cm) side to side or
back to front.
• The base is leveled when the white
markers on the recline level indicators
(#9) on both sides are completely within
the green area.
Uninstalling the base when installed with a LATCH connection:
Step 1: release the LATCH connectors (#8) from the LATCH anchor
points in the vehicle (a).
Step 2: Press and hold the red LATCH connector release buttons (#7)
and pull them off (b).
Step 3: Store the LATCH connectors by pushing them into their storage
slots in the base until they click into place (c).
Uninstalling the base when installed with a Lap-Shoulder or Lap belt
connection:
Step 1: open the belt lock-offs (#4) (in case of lap-shoulder connection
only) to release the vehicle belt (d).
Step 2 Unbuckle the vehicle belt (e) and pull it through and out of the
vehicle belt guides (f).
7.6. Uninstalling the Base
27
a.
c.
d.
f.
e.
b.
INSTALLING THE DOONA BASE
THE NEXT GENERATION CAR SEAT / DOONA BASE
28
08 / Installing
the Doona Infant Car
Seat with a Base.
The Doona Base must be secured in the vehicle before
installing the Doona Infant Car Seat in it.
Before you install the Doona Infant Car Seat in the
Doona Base, make sure it is in car seat mode and the
handle is in its upright position.
WARNING
IMPORTANT! For further information on the Doona Infant Car Seat use
modes, changing between use modes and adjusting the rotation angle
of the handle please refer to the Doona Infant Car Seat user guide.
Step 1: When the Doona Infant Car Seat is in car seat mode (wheels
are folded), and the handle is in its vertical position, place the Doona
Infant Car Seat facing the back of the vehicle (opposite the direction
of driving) (a).
Step 2: Align the Doona Infant Car Seat above the base anchor points
and slide it down until a click is heard and it is locked in place (b).
Step 3: Shake the handle to ensure that the Doona Infant Car Seat is
properly secured (c).
29
a.
d.
b.
e.
c.
Step 4: Check the base release button - it should turn from red to green
once the Doona Infant Car Seat is successfully locked in the base (d).
Step 5: Rotate the handle toward the back seat of the car, for anti-
rebound protection (e).
INSTALLING THE DOONA INFANT CAR SEAT WITH A BASE
THE NEXT GENERATION CAR SEAT / DOONA BASE
30
09 / Removing
the Doona Infant Car
Seat from the Doona
Base.
Note: For further information on the Doona Infant Car Seat use
modes, changing between use modes, and adjusting the rotation
angle of the handle, please refer to the Doona Infant Car Seat
user guide.
Step 1: Rotate the Doona Infant Car Seat handle to its vertical
position (a).
Step 2: Press and hold the base release button (#10) with the one
hand and slightly tilt the Doona Infant Car Seat toward your body
until it is released from the base anchor points (#1) (b), then lift the
Doona Infant Car Seat up and remove it from the car (c).
Step 3: Unfold the Doona Infant Car Seat wheels (d), rotate and
extend the handle to ‘stroller mode’ (e) and you are ready to go!
31
a.
b.
d.
c.
e.
REMOVING THE DOONA INFANT CAR SEAT FROM THE DOONA BASE
THE NEXT GENERATION CAR SEAT / DOONA BASE
32
10 / Care
Instructions.
In an accident, at a collision speed above 6 mph (10
km/h), the Doona Base and/or the Doona Car Seat
could suffer damage which is not necessarily visible.
Simple Parenting recommends using NHTSA’s re-use after
crash guidelines.
Regularly check all important parts for damage. Ensure
the correct operation of all mechanical components.
Should the Doona Base be damaged (e.g. after
dropping it) it must be inspected.
Never use spare parts or accessories other than those
supplied or approved by the manufacturer – The Doona
Base is compatible only with the Doona Infant Car Seat.
WARNING
Cleaning
It is recommended to clean the Doona Base periodically, in order to
keep it properly functioning.
Always remove the Doona Infant Car Seat before cleaning the Doona
Base. It is also recommended to remove the Doona Base from the car
in order to clean it properly.
33
Use only a sponge to clean or rinse using warm water, soap and a rag.
DO NOT use any solvents or lubrication. Using anything other than
soapy water can cause the moving parts to malfunction.
Replacement Parts
Replacement parts are available for the Doona Base. To order
replacement parts, contact your local distributor’s customer service:
HAPPY KIDZ, LLC.
Tel: (862) 240 1755
E-mail: doona@happykidssmartparents.com
Please have the restraint model and serial numbers available to
expedite service.
CARE INSTRUCTIONS
THE NEXT GENERATION CAR SEAT / DOONA BASE
34
11 / Two-Year
Warranty.
We guarantee that the Doona Base was manufactured in accordance
with the US safety standards and regulations, and it meets the highest
standards of quality.
For the Doona Base we provide a 2-year warranty against manufacturing
or material defects.
The warranty period is effective from the day of purchase.
As proof of purchase we ask that you ll out the Warranty Card and retain
it for the whole term of the warranty period, together with your sales
receipt. In case of a warranty claim, the Warranty Card must be returned
together with the product to your local distributor.
Please also register your Doona Base online at:
www.simpleparenting.co/register
The Warranty will cover a Doona Base which has been handled properly.
The warranty is valid only with Simple parenting’s replacement
components for this product.
Simple Parenting reserve the option to provide repair or replacement
components for this product.
The warranty does not apply in the following cases:
35
TWO-YEAR WARRANTY
• The product shows normal signs of wear and tear.
• Damage occurred as a result of exposing the product to excessive stress.
• Damage occurred as a result of inappropriate or improper use.
• The product has been used for a purpose other than that specied in
this user manual.
• Damage occurred as a result of use of aftermarket accessories.
In the event of a warranty claim, please contact your local distributor:
Customer Service Tel: (862) 240 1755
E-mail: doona@happykidssmartparents.com
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Simple Parenting Doona ISOFIX Base bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Simple Parenting Doona ISOFIX Base in de taal/talen: Engels als bijlage per email.

De handleiding is 1,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Simple Parenting Doona ISOFIX Base

Simple Parenting Doona ISOFIX Base Gebruiksaanwijzing - Nederlands - 28 pagina's

Simple Parenting Doona ISOFIX Base Gebruiksaanwijzing - Deutsch - 28 pagina's

Simple Parenting Doona ISOFIX Base Gebruiksaanwijzing - English - 28 pagina's

Simple Parenting Doona ISOFIX Base Gebruiksaanwijzing - Français - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info