739735
32
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
33 GB
Avoid damage to the heated
shawl / wrap!
Please ensure that you:
· Only connect the heated shawl / wrap to
the voltage indicated on the label,
· only use the heated shawl / wrap in conjunc-
tion with the control
1
indicated on the
heated shawl / wrap (label),
·
do not switch the heated shawl /
wrap on if it is folded or bunched
up,
·
do not squeeze or jam the heated shawl / wrap,
· do not cause any sharp creases in the heated
shawl / wrap,
· do not place any objects, e.g. suitcase or
washing basket, on the heated shawl /
wrap when it is switched on,
· do not place any source of heat e.g. a hot
water bottle or similar items onto the warp
when it is switched on.
Ignoring this advice may damage the heated
shawl / wrap.
Do not cover the control
1
and do not place
it on the heated shawl / wrap when the heated
shawl / wrap is in operation. The electronic
components in the control
1
of the heated
shawl / wrap cause the control
1
to heat up
slightly during operation.
Do not pull, twist or crease the cables. Ignor-
ing this advice may damage the heated
shawl / wrap.
Safety system
Note: the heated shawl / wrap is equipped with a
safety system. The electronic sensor technology
prevents the entire surface of the heated shawl /
wrap from overheating by automatically switching
off in the event of a fault.
If the safety system switches the heated shawl /
wrap off automatically as a result of a fault, the
function display on the control
1
will no longer
light up, even when heated shawl / wrap is
switched on.
Please note that, for safety reasons, the heated
shawl / wrap must not be used after a fault and
must be returned to the service address
indicated.
Preparing the product for use
Note: The heated shawl / wrap may smell of plas-
tic the first time you use it, but this will disappear af-
ter a short period of time.
Lay the heated shawl / wrap over your shoul-
ders in such a way that the dark side is facing
your body.
If necessary, fasten the press studs
4
on the
front side (fig. B). There are additional press
studs
5
in the arm region (fig. B).
To begin, first connect the control
1
to the
warp with the plug-in connector
3
(see fig. C).
Switching on / off /
Selecting the temperature
Switching on:
Set Level 1, 2, 3, 4, 5 or 6 on the control
1
to
switch the heated shawl / wrap on.
Note: The function indicator
2
illuminates
after the heated shawl / wrap is switched on.
Switching off:
Set Level 0 on the control
1
to switch the
heated shawl / wrap off.
Note: The function indicator
2
ceases to
illuminate.
Selecting the temperature:
Just before using the heated shawl / wrap, set it
to the highest temperature setting (level 6). This
will cause the heated shawl / wrap to warm up
quickly.
If you wish to leave the heated shawl / wrap
on for several hours, set the lowest temperature
(level 1).
Important safety instructions / Safety system / Preparing the product for use
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SWC 100 A1 IAN 75375 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SWC 100 A1 IAN 75375 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info