576714
25
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
22
STGG 1800 A1
GB
Assembly and setting up
WARNING! RISK OF FIRE!
Never place the appliance underneath wall
cupboards or next to curtains, cupboard
walls or other fl ammable objects.
Set up the appliance at least 70 cm from any
ammable materials (e.g. curtains).
Always place the appliance on a heat-resistant
surface.
Set up the appliance with its rear side directly
against the wall. When doing so, ensure that
the wall is made of heat-resistant material
and that the lid 3 can open fully.
1) Remove all of the parts from the box and
remove the packaging material and any
protective fi lm.
2) Clean all components as described in Chapter
“Cleaning and care”. Ensure that all parts are
completely dry.
3) Place the appliance on a heat-resistant, clean
and level surface.
4) Place the drip tray 6 in the frame 5 so that
it sits in the recess to the left of the centre.
ATTENTION! DAMAGE TO PROPERTY!
Never use the appliance without the drip
tray 6! Otherwise hot fat and other hot
liquids will drip down from the appliance
onto the surface below.
5) Place the griddle 1 onto the frame 5.
Ensure that the socket 2 is on the right side.
The griddle 1 must sit correctly in the frame
otherwise the thermostat 9 cannot be con-
nected to the socket 2.
6) Push the hinges of the lid 3 into the recess on
the frame 5 and close the lid 3.
7) Connect the thermostat 9 with the socket 2
on the appliance. Ensure that the thermostat
9 is pushed up to the stop in the socket 2.
Otherwise the appliance cannot heat up!
Before fi rst use
1) Open the lid 3 by pushing up the catch on
the handle 7 and, at the same time, pulling
the lid 3 upwards.
Open the lid 3 until the hinges slide down
into the hinge guides 4 and the lid 3 is fi rmly
in place.
2) Wipe the griddle 1 with a moist cloth.
3) Lightly grease the griddle 1 with fat or oil that
is suitable for baking/grilling. This allows any
cooking residues on the griddle 1 to be more
easily removed.
4) Close the lid 3 by lifting it lightly into the
hinge guide 4 so that it can be folded shut.
5) Insert the plug in a mains power socket and
set the temperature control 8 to level 5. The
appliance will heat up.
6) Wait for 10 minutes.
7) Then disconnect the plug and allow the appli-
ance to cool down.
NOTE
The fi rst time the appliance heats up, a small
amount of smoke and smell may be generated
due to production-related residues. This is
completely normal and is not dangerous.
Provide suffi cient ventilation by opening a
window, for example.
8) Wipe the griddle 1 with a damp cloth after
cooling.
9) Clean the drip tray 6 as described in Chapter
“Cleaning and care”.
10) Ensure that all parts are completely dry before
operating the appliance.
The appliance is now ready for use.
IB_103845_STGG1800A1_DE.indb 22 30.10.14 16:34
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest STGG 1800 A1 - IAN 103845 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest STGG 1800 A1 - IAN 103845 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info