773468
31
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
GB/IE 31
It is necessary to repair the product if it has
been damaged in any way, for example, if the
housing is damaged, if liquid or objects have
penetrated the device or if the product has
been exposed to rain or moisture.
Repair work is also required if the device is
not working properly or has been dropped.
If smoke is produced, or there are any
unusual sounds or smells, turn the product off
immediately. In such cases, the product should
not be used until they have been inspected by
authorised service personnel. Only have the
device repaired by qualified personnel. Never
open the housing of the product.
Only use a clean, dry cloth for cleaning the
product and never use any corrosive liquids.
Use a slightly moistened cloth and a mild
cleaning agent to remove stubborn dirt.
Troubleshooting
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
Ensure that the AC cord of the apparatus is
connected properly.
Ensure that there is power at the AC outlet.
Press the standby button to turn the unit on.
Remote control does not work
Before you press any playback control button,
first select the correct source.
Reduce the distance between the remote
control and the unit.
Insert the battery with its polarities (+/-)
aligned correctly.
Replace the battery.
Aim the remote control directly at the sensor on
the front of the unit.
Clock setting erased
Power has been interrupted or the power cord
has been disconnected.
Reset the clock.
Tuning in a station
Press and hold the / buttons on the remote
control, the frequency changes down or up
automatically until a station is found.
Note:
The search may not stop at a station with a very
weak signal.
Press the / buttons on the remote control
repeatedly until you find the station you want.
Each press of the / buttons will adjust the
frequency by 0.1 MHz. If reception is still poor, try
to move the radio to another location.
Presetting stations manually
You can preset up to 20 FM stations.
1. Tune in the desired station, then press the
PROG button on the remote control.
2. Press the PRE-/PRE+ buttons on the remote
control to select the preset number.
3. Press the PROG button on the remote control
to store the station.
4. Repeat above steps 1 to 3 for each station
you want to store in memory with a preset
number.
Storage when not in use
Store the unit in a dry location to protect it from
dust and direct sunlight.
Cleaning
Switch the product off, remove all plugs before
cleaning!
No acid, chafing or solvent cleaning agents
should be used or the product can be
damaged.
Only clean the outside of the product using a
soft, dry cloth!
For persistent soiling, a mild cleaning agent
can be used.
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SST 100 A1 - IAN 293926 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SST 100 A1 - IAN 293926 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 3.9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info