679193
30
Verklein
Vergroot
Pagina terug
1/117
Pagina verder
26GB
IE
SKV 1200 B2
Now you can clean all the parts (blender jug C,
blade holder A the blade z and sealing ring B)
in warm water with a little washing up liquid
using a washing up brush. Afterwards, rinse all
the parts with clean water so that no detergent
residues remain.
NOtE
The blender jug C and the measuring cup e
are dishwasher-safe.
If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere. This may cause
them to become deformed. We recommend
using the top rack of the dishwasher and a
washing programme with max. 45°C.
After cleaning, reassemble the blender:
Push the sealing ring B back into the recess
on the blade holder A with the blade z.
Place the blade holder A with the blade z
back into the blender jug C so that the
blade z protrudes into the blender jug C.
Note the corresponding slots on the blender
jug C.
Turn the blade holder A clockwise as far
as possible so that the blade holder A sits
firmly on the blender jug C again.
Press the blender lid r
with the measuring
cup e slightly offset firmly back onto the
blender t. Close the blender lid r by
turning it clockwise as far as the stop
back
into the catch
on the blender t. Ensure
that the pouring spout on the blender t
is
closed.
In most cases, you can achieve sufficiently hygienic
cleaning of the blender t immediately after use in
the following way:
1) Put some water containing a little detergent
into the fully assembled blender t.
2) Press the blender lid r
with the measuring cup e
slightly offset firmly onto the blender t.
Close the blender lid r by turning it clockwise
as far as the stop
back into the catch
on the
blender t. Ensure that the pouring spout on
the blender t
is closed.
3) Switch on the blender t for a few seconds.
4) Pour out the washing water. Any residues can
be removed with a washing-up brush.
5) Then rinse out the blender t with plenty of
clean water so that all detergent residues are
removed.
Storage
Store the cleaned appliance in a clean, dust-free
and dry location.
Troubleshooting
If the appliance suddenly stops working:
The appliance has overheated and triggered the
automatic safety cut-out.
Turn the rotary switch 3 to 0.
Remove the plug from the wall socket.
Allow the appliance to cool for 15 minutes.
If the appliance has not yet cooled off com-
pletely after 15 minutes, it will not start.
Wait a further 15 minutes and try switching
on again.
If the appliance cannot be switched on:
Check that the plug is correctly connected
to a wall socket.
Check whether the swivel arm 1 is in the
wcorrect position.
IB_292161_SKV1200B2_LB8.indb 26 22.09.17 07:53
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SKV 1200 B2 - IAN 292161 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SKV 1200 B2 - IAN 292161 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 3,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info