600793
96
Verklein
Vergroot
Pagina terug
1/102
Pagina verder
94
10. Cleaning and maintaining the appliance
Warning! To prevent the risk of
electric shock, injury or damage:
Always take the mains plug out of its
socket before cleaning.
Never immerse the base unit 17 in water.
Remember that the blades in the blender
jug 20 are extremely sharp. Never
touch them with your bare hands to
avoid cutting yourself.
Caution! Never use scouring, corrosive or
abrasive cleaning materials as these might
damage the appliance.
10.1 Cleaning the base unit
1. Clean the base unit 17 with a damp
cloth. A little detergent may also be
used.
2. Wipe over with clean water.
3. Do not use the base unit 17 again until it
is completely dry.
10.2 Cleaning the blender jug
1. Place the blender jug 6 containing the
blade assembly on the appliance 20.
2. Half fill it with hot water.
3. Put the lids for the blender jug 25 and its
fill opening with measuring scale 26 in
place.
4. Insert the power supply plug into a
suitable mains socket (see “3. Technical
data” on page 78).
5. Press the pulse button briefly several
times 9.
6. Take the jug 6 off the appliance.
7. Pour away the water.
The blender jug 6 is now pre-cleaned.
8. Remove the blade assembly 20 (see
“7.2 Inserting and removing the blade
assembly” on page 85)..
9. Clean the blender jug 6 by hand in the
sink with soapy water.
10.Then rinse it 6 thoroughly under clear
water.
11. Allow the jug 6 to dry completely before
using it again.
10.3 Cleaning the accessories
Warning! The blade
assembly 20 has very sharp
blades. To avoid injury, please
observe the following information:
Remember that the blades of the
assembly 20 are extremely sharp.
Never touch them with your bare hands
to avoid cutting yourself.
When washing up by hand, the water
should be clear enough that you can
easily see the blade assembly 20 and
do not risk cutting yourself on its
extremely sharp blades.
1. Remove the blade assembly 20 from the
blender jug 6 (see “7.2 Inserting and
removing the blade assembly” on
page 85).
2. Remove the seal 19 from the blade
assembly 20.
3. Remove the seal 24 from the lid of the
blender jug 25.
4. Remove the seal 5 from the drip tray 4.
5. Clean all the accessories by hand in the
sink.
6. Allow all parts to become completely
dry.
7. Replace the seal 5 in the drip tray 4.
RP114279 Küchenmaschine mit Heizung LB2 Seite 94 Montag, 12. Januar 2015 9:50 09
96

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SKMH 1100 A1 - IAN 114279 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SKMH 1100 A1 - IAN 114279 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 3,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info