575421
4
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
- 2 -
Cool-Zone
Deep Fat Fryer
Intended Usage
The deep fryer is intended for use in private house-
holds, for frying foodstuffs. It is not intended for use
in commercial or industrial environments.
Safety instructions
Risk of electrical shocks.
Connect the appliance to a mains power socket
delivering a voltage of 230 V
~
50/60 Hz.
Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
Ensure that the power cable never becomes wet
or moist during operation.
Never submerge the operating/heating element
and the housing with the power cable in water,
and do not clean these components under
running water.
Risk of fire!
Do not use the appliance in the vicinity of hot
surfaces.
Do not leave the appliance unattended when in
use.
Do not use an external timing switch or a separate
remote control system to operate the appliance.
NEVER melt solid fat (fat in blocks) in the deep
fryer. The heating element may be damaged
by the high temperature and there is a risk of
fire! Melt the fat beforehand in a saucepan or si-
milar.
NEVER use water to extinguish the
fire!
Old or dirty fats and oils can spontaneously ignite
themselves if overheated. Change the oils or fats
in good time. In case of fire, remove the power
plug from the wall and smother the burning fat
or oil with a damp towel or fire blanket.
Risk of personal injury!
This appliance is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
Children should be supervised to ensure that
they do not play with the appliance.
Ensure that the appliance stands with a safe and
secure positioning.
Do not operate the appliance if it has sustained
a fall or is damaged. Arrange for the appliance
to be checked and, if necessary, repaired by
qualified technicians.
During the frying process hot steam is generated,
especially when the lid is open. Keep a safe
distance away from the steam.
Ensure that all parts are completely dry before
pouring oil or liquid fat into the deep fryer.
Otherwise, hot oil or fat could splatter out.
Carefully pat all foodstuffs dry before placing
them in the deep fryer. Otherwise, hot oil or fat
could splatter out.
Be especially careful with frozen foodstuffs.
Remove all ice particles. The more ice there is
on the foodstuff, the more the hot oil or fat will
splatter.
Some parts of the appliance become very hot
during operation. Touching these may cause
serious burns.
IB_66928_SKF2300A1_LB6 28.04.2011 14:57 Uhr Seite 2
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SKF 2300 A1 - IAN 66928 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SKF 2300 A1 - IAN 66928 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Silvercrest SKF 2300 A1 - IAN 66928

Silvercrest SKF 2300 A1 - IAN 66928 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano - 54 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info