773565
35
Verklein
Vergroot
Pagina terug
1/204
Pagina verder
33
GB
8. Operation
DANGER of burns
!
~During operation, the surfaces of the de-
vice may become hot. Do not touch any
hot parts of the device such as the air
outlet13 on the back.
~Use oven gloves or potholders to touch
the pan10 and frying basket5.
~During frying, hot steam escapes from
the air outlet13. Be careful not to put
your hands into the steam.
~Do not move or transport the hot air fry-
er while it is switched on.
WARNING! Risk of material damage!
~The device must not be operated under
any circumstances without the frying
basket5!
8.1 Power connection
When the device is set up, plug the
mains plug11 into an earthed wall
socket that corresponds to the specifica-
tions on the rating plate. The wall socket
must also be easy to reach after switch-
ing on the device.
- All indications in the touch display3
light up briefly.
- A double acoustic signal is triggered.
- The symbol for the Start/Stopbut-
ton20 is lit. The lit symbol indi-
cates standby mode.
8.2 The touch display
On the touch display3 there are symbols
that only display functions, e.g. the heating
symbol 24.
Other symbols (also) represent a button, e.g.
the Start/Stop button
20
. The term ‘but-
tons’ is used in this instructions for buttons and
keys to make the text easier to read.
8.3 Switching on/off
Press the Start/Stop button 20 to
switch on the device from standby
mode.
- The display3 shows the program
symbols14 and the lower bar with
the buttons1823.
- The preset temperature 180 °C and
the preset cooking time 15 min are
displayed flashing alternately.
NOTE: if you switch off the device by hold-
ing down the Start/Stop button 20 im-
mediately after switching it on, the fan will
be switched on for approx. 1 minute.
Press the Menu button 23 repeated-
ly to select the desired program.
Press the Start/Stop button 20
again in order to start the device.
- The heating symbol 24 is dis-
played.
- The fan symbol 25 flashes.
- The set temperature and cooking time
are displayed alternately.
- The cooking time is counted down.
- The selected program symbol14
flashes.
While the device is running, press and
hold the Start/Stop button 20 to
switch the device to standby mode.
- An acoustic signal sounds.
- The fan continues to run for approx.
1minute and the fan symbol 25
flashes.
-
The display
3
only shows the
symbol
20.
To completely switch off the device and
disconnect it from the mains, pull out the
mains plug11.
__352840_2010_B8.book Seite 33 Montag, 17. Mai 2021 10:55 10
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SHF 1400 A1 - IAN 352840 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SHF 1400 A1 - IAN 352840 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans, Pools, Deens als bijlage per email.

De handleiding is 8.12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info