754155
21
Verklein
Vergroot
Pagina terug
1/91
Pagina verder
19
GB
7. Preparation
7.1 Setting up the device
Place the device on a dry, level and heat-re-
sistant surface.
7.2 Requirements on the
film/bags
- You can use tubular film or complete
bags.
- The film must not be wider than 28 cm.
- The film must be provided with dots/
knobs or grooves on one side. Smooth
films are not suited for sealing.
- Thickness should be between 0.17 and
0.29 mm (170 - 290 ).
- When buying the film, check the temper-
ature range it is suited for. The ideal
range is between -20 °C and +110|°C.
Such films can be deep-frozen or boiled.
The film included in the delivery is suited
for this application.
- You will find those data on the package
of the film or bag.
7.3 Producing a bag
If you use finished bags, these steps do not
apply.
1. Unwind the length of film from the roll
you require for your bag. Regarding the
length of the bag, remember that a
space of approx. 6 cm towards the top
should be left after filling.
2. Use scissors to cut the piece of film as
straight as possible.
3. For sealing the bag (see “Seal the bag”
on page 19).
8. Use
Every active function can be cancelled im-
mediately by pressing the button|3 .
WARNING! Risk of material
damage!
~Observe the specified operating time of
the device. After the sealing or vacuum-
ing process, the device must cool down
for at least 80 seconds.
8.1 Fill the bag
CAUTION:
~No food or liquids must be present at
the top edge, where you want to seal
the bag. That area must be clean and
dry. Otherwise, it is impossible to pro-
duce a proper welding seam.
Fill the bag only up to a level of 6 cm
below the top edge.
8.2 Seal the bag
1. Smooth the bag where it is to be
sealed.
2. Open the lid|11. If necessary, press the
buttons|8 first.
3. Figure A: place the bag in the device.
For this purpose, the end of the film
must be positioned shortly in front of the
rear limitation webs|12 and the lateral
limitation webs|15.
4. Ensure again that there are no creases
in the film - especially in the area above
the welding wire|14.
5. Close the lid|11.
6. Figure B: use both hands to press firm-
ly on the edges of the lid|11. They must
engage audibly.
BBB)ROLHQVFKZHLJHUlWB%ERRN6HLWH'RQQHUVWDJ6HSWHPEHU
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SFS 110 C2 - IAN 295933 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SFS 110 C2 - IAN 295933 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 2,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info