646936
22
Verklein
Vergroot
Pagina terug
1/90
Pagina verder
20
GB
7. Press the button|2 . The red LED|1
lights up. The film is being sealed.
- After approx. 5 - 7 seconds, the red
LED|1 goes out and the sealing pro-
cess is completed.
8. Simultaneously, press buttons|8 in order
to release the lock of the lid|11.
9. Open the lid|11 and remove the bag.
10. Check the welding seam. It should be a
smooth creaseless seam.
8.3 Vacuum-pack and seal
the bag
DANGER! Risk of electric
shock due to moisture!
~ For vacuum packing, no liquids must be
inside the bag.
~
Ensure that no liquid is sucked in during
the extraction of air. If this occurs, interrupt
the process by pressing the button|
3
.
1. Smooth the bag where it is to be
sealed.
2. Open the lid|11.
3. Figure A: place the bag in the device.
For this purpose, the end of the film
must be positioned shortly in front of the
rear limitation webs|12 and the lateral
limitation webs|15.
4. Ensure again that there are no creases
in the film - especially in the area above
the welding wire|14.
5. Close the lid|11.
6. Figure B: use both hands to press firm-
ly on the edges of the lid|11. They must
engage audibly.
7. Press the button|
4
. The green LED|
5
lights up. The vacuuming starts.
- After the vacuuming, the green LED|5
goes out and the red LED|1 lights up -
the sealing process is active. After ap-
prox. 5 - 7 seconds, the red LED|1
goes out and the sealing process is
completed.
8. Simultaneously, press buttons|8 in order
to release the lock of the lid|11.
9. Open the lid|11 and remove the bag.
10. Check the welding seam. It should be a
smooth creaseless seam.
9. Cleaning and
storage
DANGER! Risk of injury
through burning/scalding!
~ Allow the device to cool down com-
pletely before you clean it or put it
away.
~ The welding wire|14 becomes very hot
during operation. Do not touch the hot
welding wire|14.
DANGER! Risk of electric
shock!
~ Prior to cleaning, disconnect the mains
plug|6 of the device.
DANGER! Risk of electric
shock due to moisture!
~ The device, the power cable|6 and the
mains plug must not be immersed in
water or any other liquids.
WARNING! Risk of material
damage!
~ Do not use any astringent or abrasive
cleaning agents.
9.1 Cleaning
In order to ensure the proper function and
the full capacity of your device, clean it reg-
ularly.
Wipe down the housing of the device
with a damp cloth.
Prior to the next use, the device must be
completely dry.
BB&3(B)ROLHQVFKZHLVVJHUDHWB%ERRN6HLWH'LHQVWDJ$SULO
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SFS 110 B2 - IAN 277100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SFS 110 B2 - IAN 277100 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 2,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info