668039
25
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
26 GB/IE
Cleaning and Care / Disposal / Warranty / Service centreChanging the batteries / Troubleshooting
4. Note: If the scales do not appear to work,
check that the battery has been inserted
correctly and reinsert it if necessary.
Hand-held unit
4
1. Remove the battery cover
10
from the battery
compartment in the direction of the arrow.
2. Remove the exhausted battery and dispose of
it as described in the section about “Disposal”.
3. Place the new battery in the battery compart-
ment. Please note the polarity. The “+” symbol
must be visible on the top of the battery. Press
the battery gently downwards and push the
battery cover
10
back on to the battery com-
partment.
Note: When you insert the battery, make sure
that the contacts do not get bent.
4. Note: If the LC display
1
does not appear to
work, check that the batteries have been in-
serted correctly and reinsert them if necessary.
Troubleshooting
= Error
= Cause
= Solution
The wrong weight is being displayed.
The scales have an incorrect zero point.
Step briefly off the scales and wait until the
scales switch off. Repeat the measurement
process.
The scales are not on a level, stable surface.
Place the scales on a level, stable surface.
You are not standing still.
Stand as still as possible.
The LC display
1
shows „Err“.
The maximum load capacity of
180 kg / 396 lb / 28 st has been exceeded.
Only load the scales up to
180 kg / 396 lb / 28 st.
The LC display
1
shows „ErrL“.
The proportion of fat is outside of the
measurable range.
Measurement of body fat is not possible,
because the proportion of body fat is below
the measurable range.
The LC display
1
shows „Errh.“
The proportion of fat is outside of the measura-
ble range.
Measurement of body fat is not possible, be-
cause the proportion of body fat is above the
measurable range.
The LC display
1
shows „- - - -“.
Body fat measurement not possible.
Please repeat the measurement process bare-
foot or lightly moisten the soles of your feet.
The hand-held unit
4
has not received data
from the infrared sensor
2
.
Repeat the measurement process. After select-
ing the user, step onto the scales barefoot
within 15 seconds to start the body fat meas-
urement. Ensure that there are no objects lo-
cated between the infrared sensor
2
and
infrared receiver
9
and that these are not
covered.
The LC display
1
shows „hLo“.
The battery of the hand-held unit
4
is spent.
Change the battery in the hand-held unit
4
.
The LC display
1
shows „bLo“.
The battery in the scales is spent.
Change the battery in the scales.
The LC display
1
only shows the time.
A weight measurement is not possible.
Check to see whether there are obstacles be-
tween the infrared transmitter
2
and infrared
receiver
9
which may affect transmission
(i.e. furniture, fingers, stomach, etc.). Repeat
the measurement process and hold the infrared
receiver
9
directly over the infrared transmit-
ter
2
while doing so.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SDWH 180 A1 - IAN 285970 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SDWH 180 A1 - IAN 285970 in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 3,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info