118060
3
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
KH 2380
Operation manual
KH2380_Cover_UK.indd 7 07.09.2006 14:47:11 Uhr
GB / IE  Operation and Safety Notes ......................................  Page  5
KH2380_Cover_UK.indd 8 07.09.2006 14:47:13 Uhr
A
B
C
123 4
5
6
789blbmbnbobpbqbrbs
bu
cl
cn
dp
cq
cr
cs
bt
cm
cp
cuct dl dm
dn
do
ds
drdp dq
co
KH2380_Cover_UK.indd 9 07.09.2006 14:47:14 Uhr
D
E
gngm dt
duelen ep
es
eq
fo
fpfnem
fqfrfugl fsft
gp
er
eofm
et
eufl
G
irisit
F
ht hr
hs
hu
hp
il
hqim
hoio
in hm
hlip
gqgr hngtgu
gs
iq
go
KH2380_Cover_UK.indd 12 07.09.2006 14:47:20 Uhr
5 GB/IE
Introduction
For your personal safety ........................................................................... Page 6
Proper Use ............................................................................................... P
age 6
Equipment ................................................................................................ Page 6
 Scope of Supply ....................................................................................... P
age 7
Technical Information ............................................................................... Page 8
A
udio Storage Media ................................................................................ Page 8
Safety
Important specific notes on safety ........................................................... Page 9
Preparation ............................................................................................ Page 11
Installation
Removing the control panel from the car radio ......................................... Page 11
 Installation of the DIN assembly bracket into the car’s instrument panel .. P
age 11
Connection to the car’s loudspeaker ........................................................ Page 12
Connection with car’s 12 V DC power supply ............................................ Page 12
C
onnection with CD Changer ................................................................... Page 13
C
onnection of an amplifier ....................................................................... Page 13
Connecting a portable audio device ......................................................... Page 13
Connecting to the aerial of the motor vehicle ........................................... Page 14
Attaching to the DIN assembly bracket .................................................... Page 14
Attaching the control panel ...................................................................... P
age 14
Operation
Switching on ............................................................................................ Page 14
Turning off ............................................................................................... Page 15
Selecting and adjusting the sound ............................................................ Page 15
Selecting and adjusting playback functions .............................................. P
age 15
Adjusting volume ...................................................................................... P
age 16
Setting the 3-Band PLL Tuner .................................................................. Page 16
P
laying from audio storage media ............................................................ Page 18
CD, CD-R and CD-RW ....................................................................... Page 18
USB Memory Stick, MP3 Player or SD / MMC .................................... Page 20
 Recording /
Storing / Deleting on SD, MMC or a USB Memory Stick ........... Page 21
Promote Control .................................................................................. Page 22
Troubleshooting .................................................................................. Page 23
Maintenance and Service .............................................................. Page 23
Disposal ................................................................................................... Page 24
Information
Important warranty notes ......................................................................... Page 24
Importer ................................................................................................... P
age 24
Content
KH2380_Content_UK.indd 5 12.09.2006 11:57:08 Uhr
6 GB/IE
Car Radio KH 2380
L Introduction
L For your personal safety
Please read the operating instructions carefully; to
do so, unfold the pages featuring the illustrations.
Pay precise attention to the notes when taking the
device into operation. Should you have any further
questions on how to use this car radio recorder,
please contact your national service point (see
guarantee card). Store the operating instructions
safely for later reference and hand them to third
parties when passing your car radio recorder to a
new user.
L
Proper Use
The KH 2380 car radio is suitable for private use for
receiving radio stations in the FM / MW / LW range and
for playing back CD, CD-R, CD-RW, USB Memory-
Stick, MP3 Player, SD and MMC audio storage media.
It is able to make recordings in WMA format on to
SD, MMC or USB memory stick (not supplied) of the
radio stations being played back. The car radio has
a removable control panel and an IR remote control
device which can only be supplied with electricity by
means of 1 lithium ba
ttery of type CR2025, 3 V DC.
The car radio may only be connected to the 12 V
DC supply. The device is suitable for connecting to
four loudspeakers with an impedance of 4-8 Ohm,
a maximum of four power amplifiers (to the four
speaker output channels) and a CD changer.
Any careless use or use other than for the intended
purpose will result in the guarantee becoming invalid.
L
Equipment
Front of the Control Panel (Fig. A)
1 Control panel
2 Plastic frame
3 Display window
4 “Open” button
5
:
“Skip” button (forwards)
6
9
“Skip” button (reverse)
7
AF
“AF” button
8
TA
“TA” button
9
PTY
“PTY” button
bl
6
“6” button
bm
5
“5” button
bn
4 RDM
“4 / RDM” button
bo
3 INT
“3 / INT” button
bp
2 RPT
“2 / RPT” button
bq
1 PAU
“1 / PAU” button
br
DISP
“DISP” button
bs
BD / ENT
“BD/ENT” button
bt
SCAN
REC•
“SCAN / REC” button
bu
LD / MD
“LD / MD” button
cl
MU
“MU” button
cm
A / PS
“A / PS” button
cn
PWR / DIM
“PWR / DIM” button
co Sensor (remote control)
cp “SEL / VOL control knob
Reverse of the Control Panel (see Fig. B)
cq Unlock mechanism 2 x
cr Plug-in connection strip
Front of the Car Radio
(Control Panel removed) (see Fig. C)
cs LED (red) / CD compartment
ct Front
cu CD compartment
dl Connection socket
dm Opening mechanism
dn SD and MMC port
do USB port
dp Control panel attachment point 2 x
dq LED (red) / power supply
dr Reset button
ds CD eject button
Introduction
KH2380_Content_UK.indd 6 12.09.2006 11:57:09 Uhr
7 GB/IE
Reverse of the Car Radio (see Fig. D)
dt Metal housing with vents
du ISO plug jack for loudspeaker connection
el Plug-in for rear right loudspeaker (+)
em Plug-in for rear right loudspeaker (-)
en Plug-In for front right loudspeaker (+)
eo Plug-in for front right loudspeaker (-)
ep Plug-in for front left loudspeaker (+)
eq Plug-in for front left loudspeaker (-)
er Plug-in for rear left loudspeaker (+)
es Plug-in for rear left loudspeaker (-)
et Flat blade fuse socket
eu Flat blade fuse 10 A
f l ISO plug jack to the 12 V DC power connection
(including connection of an automatic aerial)
fm Plug-in for 12 V DC constant current
fn Plug-in for electric aerial
fo Plug-in for 12 V DC ignition current
fp Plug-in for minus / earth connection in the vehicle
fq DIN 8-pole plug jack (CD changer connection)
fr Attachment screw
(including M5 nut and washer)
fs LINE IN R cinch plug jack (red / right)
ft LINE IN L cinch plug jack (white / left)
fu OUT / REAR cinch R plug jack
(loudspeaker connection [red / rear right])
gl OUT / REAR cinch L plug jack
(loudspeaker connection [white / rear left])
gm OUT / FRONT cinch plug jack
(loudspeaker connection [red / front right])
gn OUT / FRONT cinch plug jack
(loudspeaker connection [white / front left])
go Aerial socket
Top of the Car Radio (see Fig. E)
gp Transport safety screw 2 x
Front of the Remote Control (see Fig. F)
gq
DIM
POWER
“DIM POWER /
“ button
gr
SEL
“SEL button
gs TUNE / SEEK” multifunction button:
VOL+
TUNE /
SEEK
9
:
VOL -
gt
VOL+
“VOL+” button (upper)
gu
9
Skip button (reverse)
hl
:
Skip button (forwards)
hm
VOL-
“VOL button (lower)
hn
LOUD
MODE
“MODE / LOUD” button
ho
MP3
AS /
PS
“MP3 / AS / PS” button
hp
D-DN
5
“D-DN / 5” button
hq
D-UP
6
“D-UP / 6” button
hr
PTY
“PTY” button
hs
TA / TP
“TA / TP” button
ht
DISP
“DISP” button
hu
SCAN
REC
“REC / SCN” button
il
RDM
4
“4 / RDM” button
im
INT
3
“3 / INT” button
in
RPT
2
“2 / RPT” button
io
PAU
1
“1 / PAU button
ip
ENTER
BAND
“BAND / ENTER” button
iq
MUTE
“MUTE” button
Rear of the Remote Control (see Fig. G)
ir Battery compartment
is Battery holder
it Unlock button
L
Scope of Supply
1 x Car radio (including control panel)
1 x IR remote control (including 1 x lithium battery
of type CR2025, 3 V DC)
1 x Plastic box (for control panel)
1 x DIN assembly bracket
2 x Installation key
1 x Anchoring plate (including attachment material)
1 x Set of instructions
Introduction
KH2380_Content_UK.indd 7 12.09.2006 11:57:09 Uhr
8 GB/IE
L Technical Information
Car Radio
Nominal volta
ge: 13.8 V DC (minus pole negative,
connected to vehicle’s chassis)
P
ower consumption: max. 10 A
Output: max. 4 x 20 W active power factor
Distortion: - 40 dB (1%)
Amplifier TAD 7386
4 band preset EQ
Electronic master level for: Low-frequency and
high-frequenc
y sound, loudness, fade-in / fade-out,
balance
Pre-amplifier In (LINE IN)
Input level:
775 mV = 0 dB
Impedance: 47 k Ohm
Pre-amplifier Out (LINE OUT)
Output:
2000 mV
Impedance: 4,7 k Ohm
Sound control
Bass frequenc
y: 100 Hz ± 10 dB
High frequency: 10 kHz ± 10 dB
Connections
ISO:
12 V DC
ISO: loudspeaker (max. 2 pairs) (4 - 8 Ohm)
MP3 player or USB memory stick
(USB 1.1 and 2.0)
SD or MMC
CD changer
Max. four amplifiers
Display
Liquid crystal screen
(8-digit alpha-numerical Dot Matrix LCD Display)
Background lighting
(colour blue, 2 dimming levels)
3 Band PLL Tuner
Display: frequency band, radio stations, mono or
s
tereo reception, pre-sets, activated EON, AF, TA / TP
and mute function
FM band (FM 1, FM 2, FM 3)
F
requency band: 87.5 - 108 MHz
Channel increment: 50 kHz
Intermediate frequency: 10.7 MHz
Stereo separation: 25 dB
Noise cancellation: 50 dB
Pre-set stations: 18
MW Band (MW 1, MW 2)
F
requency band: 530 - 1600 KHz
Interim frequency: 450 KHz
Available sensitivity: 32 dB µV
Pre-set stations: 12
LW Band (LW 1)
F
requency band: 144 - 290 KHz
Interim frequency: 450 KHz
Available sensitivity: 32 dB µV
Pre-set stations: 6
IR remote control
Nominal volta
ge: 3 V DC
Power supply: 1 x Lithium battery type CR2025, 3 V DC
Current consumption: approx. 30 mA
Wave range: near-infrared 0.7 - 1.4 µm
Dimensions: 85 x 6 x 52 mm (L x H x W)
L
Audio Storage Media
Play
Data formats: MP3 with ID3, WMA compatible
Media: CD, CD-R, CD-RW, SD, MMC, USB 1.1 and
2.0 (stick or plug-in connection)
Noise cancella
tion: > 60 dB
Channel separation: > 50 dB
Frequency range: 20 Hz - 20 kHz
Display: Directory, file, track, album, artist, duration
Search function: File, track and starting letter are
displayed
Recording
Data formats: WMA
Storage devices: SD, MMC or USB memory stick
Playback source: 3-band PLL tuner
Display: Directory, file, track, album, artist, duration
Introduction
KH2380_Content_UK.indd 8 12.09.2006 11:57:10 Uhr
9 GB/IE
L Safety
Important specific notes on safety
The following notes are for your safety and satisfaction
in operating the device. Please observe that non-
compliance with these safety notes may lead to
substantial risks caused by accident.
Explanation of the icons and terminology used.
c D
anger! Avoid risk to life!
m Caution! Avoid risk of injury and damage to
property!
Tip! What to do!
c Danger!
·
Do not allow small children unsupervised near
the packaging material! Risk of suffocation!
·
Do not allow infants and children unsupervised
into the vicinity of the device!
·
Protect yourself against an electric shock!
Avoid any short circuits during connections:
-
with the vehicle’s 12 V DC power supply
- with the max. 2 pairs of loudspeakers with
the impedance 4 - 8 Ohm
- with a CD changer
- with a terminal amplifier
· Before connecting to the 12 V DC power supply
of a car, obtain information on how to maintain
electrical safety based on the vehicle‘s
operation manual!
· Ensure that when connecting to a vehicle‘s
12 V DC power supply, there is no voltage in the
vehicle‘s connecting cables. Equip the
c
onnecting cords with fuse holders (3 x 15 A)!
· When installing into a car, ensure that the vehicle
is out of operation and in a secure standstill
position! Turn off the ignition and bring the vehicle
into parking position with applied hand-brake.
·
Complete the connection to the 12 V DC power
supply while fully protected against humidity!
·
Complete the installation in a car, the assembly,
the maintenance and the service disconnected
from the 12
V DC power supply!
· Do not expose the device to moisture, fire, heat
and sustained temperature in excess of 50° C!
· Do not damage any lines carrying fuel or for
electricity, brakes, hydraulics, water or data
transfer when tightening the screws!
·
Ensure that the 12 V DC constant current plug-
in
fm, the 12 V DC ignition current plug-in
foand possibly the powered aerial plug-in fn
do not come into contact with a fuel line (e.g.
petrol-carrying line)!
·
Do not allow yourself to be distracted while
driving by operating the car radio or from its
displays! Familiarise yourself with its operation
before driving and practise the safe use of the
car radio’s features! Set the volume only to such
level that the sirens of emergency vehicles can
be heard on time.
m Caution!
·
Avoid injuries and damage to the sensitive sense
of hearing of passengers (in particular infants,
children and pets) while in the car! Adjust the
volume and balance of the loudspeakers for all
passengers to a healthy and comfortable level!
·
Adjust the volume such that you can always
hear the warning signals of other road users.
·
Before operation, check if all components have
been assembled in accordance with the operating
instructions!
·
Before assembly and operation, check the delivery
for damage and completeness!
·
Use the car radio only with the supplied
original parts!
·
Do not cover the metal casing
dtwith objects!
· Protect all electronic contact areas against
short circuiting, humidity, damage and impurities!
·
Do not place the device on or near a car battery!
· Prevent a short circuit and damage! Ensure that
no alien matter or objects can access the inside!
·
Disconnect the car radio in the event of
operational malfunctioning and damage
instantly from the 12
V DC power supply!
· Connection to the loudspeakers, CD changer,
amplifier and audio storage devices (CD, CD-R,
CD-RW, USB memory stick, MP3 player, SD,
and MMC) must be carried out as described in
the relevant operating manual.
·
Have the car radio repaired exclusively by
Safety
KH2380_Content_UK.indd 9 12.09.2006 11:57:10 Uhr
10 GB/IE
authorised and trained professional staff! In the
event of repairs, contact your national service
point (see guarantee card)!
·
Do not expose the device to mechanical stress!
· Avoid theft and unauthorised use especially if
the device has been installed in a car! Before
leaving the parked vehicle, remove the control
panel of the car radio and store it safely in the
plastic box.
·
Exchange any defect fuses only against new
fuses of the same type with identical A (Ampere)
rating!
·
If not used for extended periods of time, remove
the battery from the remote control!
Tip! What to do!
· When recording radio programmes please
observe the copyright regulations of the
country in which you are using the device.
·
Prepare yourself and take your time when
familiarising yourself with the car radio’s
operation! Ensure a tidy environment in which
you are not disturbed and perform the initial
operation with maximum concentration.
·
Carefully plan the assembly point. Observe that
the assembled car radio does not cause
obstruction while driving the vehicle.
·
The audio data of a CD-R, CD-RW can only be
played if they were fully burnt on to the media.
·
Use the highly sensitive CD-R, CD-RW in
accordance with their operating instructions!
·
Avoid interruptions while playing audio storage
media! Clean the CD, CD-R and CD-RW before
use with a dry anti-static cloth, wiping from the
centre toward the edge of the disk!
·
Ensure that the playing of audio storage media
is not interrupted by condensation! Remove the
CD, CD-R, CD-RW in the case of high humidity
and low ambience temperatures from the device.
·
Please ensure that audio storage media used
for playback are not exposed to condensation!
Remove CDs, CD-Rs and CD-RWs from the
device if the humidity is high and the ambient
temperatures low.
Use audio storage media only with completely
dry surfaces.
·
Store audio storage media outside of the device
in an appropriate protective cover.
·
Obtain an overview of the most important specific
terminology:
i
Receiver: Electronic receiver for radio
broadcastings and sound data of storage
media and simultaneously pre-amplifier.
i
Tuner: Receives and issues radio signals.
i
P
LL (Phase-locked-loop): Electronic
switching which enables precision reception of
radio frequencies.
i
FM (Ultra-short wave): Band receiver for
radio broadcasting (Frequency range:
8
7.5 - 108 MHz).
i
MW (Medium wave): Band receiver for radio
b
roadcasting (Frequency range: 530 - 1600 KHz).
i
L
W (Long wave): Band receiver for radio
broadcasting (Frequency range: 144 - 290 KHz).
i
CD /
CD-R / CD-RW (Compact Disc): Storage
medium for sound and image data (disk ø
a
pprox. 120 mm).
i
U
SB (Universal Serial Bus): Universal
interface for data transmission.
i
SD (Secure Digital Card): Storage media for
sound and image data (rectangular approx.
24
x 1 x 32 mm).
i
MMC (Multimedia Card): Storage media for
sound and image data (rectangular approx.
24
x 1 x 32 mm).
i
MP3 (Moving Picture Experts Group Layer 3):
Compressed audio format.
i
I
D3: Additional information which provides details
on track and artist of audio files (e.g. MP3).
i
WMA (Windows Media Audio):
Compressed audio format.
i
LINE IN: Connection for feeding audio data
into a HiFi device.
i
L
INE OUT: Connection to send out audio data
from a HiFi device.
i
Cinch: Standardised plug connector to transfer
electrical signals.
i
RDS (Radio Data System): Encrypted
additional information broadcast by radio
stations in addition to conventional music and
language.
i
AF (Alternative frequency): Function to
automatically receive the optimum frequency
of the programme tuned into.
Safety
KH2380_Content_UK.indd 10 12.09.2006 11:57:10 Uhr
11 GB/IE
i
T
A / TP (Traffic Announcement/Traffic
Program): Function to receive traffic updates.
i
EON (Enhanced Other Networks): I
f TA / TP
function is activated, while listening to a
broadcasting of a radio station the programme
switches automatically as soon as traffic updates
are broadcast. Traffic updates are then
broadcast at a pre-set volume.
i
PTY (Program Type): Function to receive
special program (e.g. rock music).
i
HiFi (High Fidelity): Quality standard for audio
replay devices.
i
D
IN 8 pole plug: adapter to connect electronic
HiFi device in accordance with DIN standard (e.
g. CD changer connection to a MP3 car radio
recorder).
i
I
SO plug: Adapter to connect electronic HiFi
devices
in accordance with International
Organization for Standardization.
L Preparation
The following auxiliaries and tools are required for
the connection and for the assembly, which are not
included in the delivery:
1
x ISO plug to connect car’s loudspeaker
1 x ISO plug to make 12 V DC connection
1
x Powered aerial connection with connector
1 x Pair of loudspeakers impedance 4 - 8 Ohm,
(incl. feed line)
3
x Fuse holder with fuse 15 A
1 x DIN assembly cut-out in car’s instrument panel
9 x Biscuit connectors
1 x Stripping tongs or cable stripping knife
1 x Screw driver
1 x Spanner with 8 mm opening
1 x Biro
To connect an antenna already installed in the
vehicle you may need:
1
x Antenna adapter (in accordance with the
Technical Data for the antenna)
To connect a CD changer you require:
1
x Connecting line with DIN-8-pole plug
To connect a final amplifier you require:
2
x Cinch connecting cable
(insula
tion and plug: white / red)
For the connection of a portable audio device
you require:
1
x Cinch connection cable / 3.5 mm jack
(insulation and plug: white / red)
To record MP3 or WMA formats you require:
1
x MMC approx. 1 GB storage capacity
or
1
x SD approx. 1 GB storage capacity
or
1
x USB memory stick approx. 1 GB storage
capacity
L Installation
L Removing the control panel
from the car radio
Avoid hard contact with the display window 3.
Press the “Open” button
4and allow the
control panel
1to reach the horizontal
position.
Push the control panel
1slightly to the left and
pull it forwards.
Store the control panel in the plastic box (see
also the illustration in the section “Attaching
the Control Panel”).
L
Installation of the DIN assembly
bracket into the car’s instrument
panel
Completely unscrew the safety transport
screws
gpfrom the metal casing dt(see Fig. E)
and carefully remove the plastic frame
2
from the front of the device ct.
Release the attachment points by slightly
raising the upper frame edge and pulling it
carefully towards the front.
Push the two installation keys between the
Safety / Preparation / Installation
KH2380_Content_UK.indd 11 12.09.2006 11:57:11 Uhr
12 GB/IE
metal housing dtand the preassembled DIN
assembly bracket until they clearly lock in place.
Ensure that the convex side faces outwards in
each case. Store the installation keys carefully
for future use.
Remove the DIN assembly bracket and place it
flush in the DIN assembly cut-out of the
vehicle’s instrument panel.
Secure the DIN assembly bracket against removal.
Bend approximately ten tin dog points on both
the upper and lower side of the DIN assembly
bracket from the inside towards the outside.
Please ensure that the DIN assembly bracket is
installed flush in the DIN assembly cut-out.
Attach the plastic frame
2completely to the
front of the device
ct.
L
Connection to the car’s loudspeaker
Tip! Use an ISO plug.
Lead the connecting cables for the speakers
already installed in the vehicle carefully out of
the DIN mounting frame at the front.
Hook up the connecting cable of the ISO plug
with the connecting cable of the loudspeakers
fitted in the car with the help of eight biscuit
connectors. Ensure that the connection of the
eight biscuit connectors does not cause any
short circuits and that the fixing screws are
firmly tightened.
Hook up the connecting lead of the plug in
el
with the (+) lead for the rear right loudspeaker.
Hook up the connecting lead of the plug in
em
with the (–) lead for the rear right loudspeaker.
Hook up the connecting lead of the plug in
en
with the (+) lead for the front right loudspeaker.
Hook up the connecting lead of the plug in
eo
with the (–) lead for the front right loudspeaker.
Hook up the connecting lead of the plug in
ep
with the (+) lead for the front left loudspeaker.
Hook up the connecting lead of the plug in
eq
with the (–) lead for the front left loudspeaker.
Hook up the connecting lead of the plug in
er
with the (+) lead for the rear left loudspeaker.
Hook up the connecting lead of the plug in
es
with the (–) lead for the rear left loudspeaker.
L
Connection with cars 12 V DC
power supply
c Danger!
· Before hooking up to the car’s 12 V DC power
supply consult the vehicles operation manual on
how to observe electrical safety!
·
Ensure that when connecting the 12 V DC power
supply there is no voltage on the vehicle’s
connecting cords. Do not damage any safety
facilities, e.g. board computer and alarm system
of vehicle.
·
Connect the 12 V DC power supply with the 3 x
15 A fuse holders!
· During vehicle installation ensure that the vehicle
is out of operation and is in safe standstill! Turn
off the ignition and bring the vehicle into parking
position with activated hand-brake!
·
During connection, use tools with double-
insulated handle!
·
Avoid electrical short circuits when connecting
to the 12 V DC power supply.
· Connect the car radio with the 12 V DC power
supply while fully protected against humidity!
Tip! Use an ISO plug.
Ensure that the fault-free flat blade fuse 10 A
eu
is inserted all the way to the catch of the flat
blade fuse socket
et.
Carefully guide the connecting cable to hook up
the 12 V DC power supply through the front out
of the DIN assembly bracket.
Connect the ISO plug with the connecting cables
of the 12 V DC power supply with the 3 x 15 A
fuse holders. Ensure that the connections of
the 3
x 15 A fuse holders do not cause any
short circuits and that the fixing screws are
firmly tightened.
Connect the cable for the 12 V DC constant
current plug-in
fmusing a 15 A safety holder
with the vehicle’s connecting cable for the
12
V DC constant current.
Optional - only if an electric aerial is connected:
Using one 15 A fuse holder each, connect the
cables for the 12 V DC ignition current
foand
electric aerial
fnplug-ins to the connection
Installation
KH2380_Content_UK.indd 12 12.09.2006 11:57:11 Uhr
13 GB/IE
cable for 12 V DC ignition current of the vehicle.
In this manner the car radio and an electric
aerial can only use current from the vehicle
when the ignition is switched on.
Connect the cable for the vehicle’s minus/
ground connection plug-in
fpwith the help of
a biscuit connector with the car’s connection
cable for the minus pole (battery’s minus pole
which by standard is connected with the car’s
chassis).
L
Connection with CD Changer
Tip! Use a connecting cable with DIN 8-pole plug.
A standard CD changer with DIN 8-pole connector
can be connected to the device.
Install the connecting cable with the DIN 8-pole
plug in accordance with its operation manual
in the car.
Guide the connecting cable with the DIN 8-pole
plug to the CD changer and carefully out of the
front of the DIN assembly bracket.
Insert the DIN 8-pole plug of the connecting cable
until it catches into the DIN 8-pole plug jack
AUX
fqto the rear of the casing.
Insert the DIN 8-pole plug to the other end of the
connecting cable until it catches into the DIN
8-pole plug-jack AUX of the CD changer.
L
Connection of an amplifier
Tip!
Use two cinch connection cables
(insula
tion and plug: white / red).
One amplifier per speaker output channel can be
connected to the device.
Install the two cinch connection cables in the
vehicle according to their operating instructions.
Pass two cinch connection cables to the
amplifier and carefully out of the front of the DIN
assembly bracket.
Insert the red plug of the first cinch connection
cable as far as it will go into the OUT / REAR
cinch R plug jack (amplifier connection
[red
/ rear right])
fu.
Then insert the two red plugs of the first cinch
connection cable as far as it will go into the
REAR cinch R plug jack (amplifier connection
[red
/ rear right]) of the amplifier.
Insert the white plug of the first cinch
connection cable as far as it will go into the
OUT
/ REAR cinch L plug jack (amplifier
connection [white / rear left])
gl.
Then insert the second white plug of the first
cinch connection cable as far as it will go into
the REAR cinch L plug jack (amplifier
connection [white
/ rear left]) of the amplifier.
I nsert the red plug of the second cinch
connection cable as far as it will go into the
OUT
/ FRONT cinch plug jack (amplifier
connection [red / front right])
gm.
Then insert the second red plug of the second
cinch connection cable as far as it will go into
the FRONT cinch plug jack (amplifier
connection [red
/ front right]) of the amplifier.
Insert the white plug of the second cinch
connection cable as far as it will go into the
OUT
/ FRONT cinch plug jack (amplifier
connection [white / front left])
gn.
Then insert the second white plug of the
second cinch connection cable as far as it will
go into the FRONT cinch plug jack (amplifier
connection [white
/ front left]) of the amplifier.
L
Connecting a portable audio device
For establishing a cinch connection to any audio
source the headphone output (3.5 mm stereo jack)
of any audio device (e.g. MP3 player) can be
connected to the car radio.
Use a 3.
5 mm jack plug connection cable to 2x
cinch plugs.
Guide the cinch connection cable to the portable
audio device and carefully out of the front of
the DIN assembly bracket.
Insert the red plug of the cinch connection
cable as far as it will go into the LINE IN R
Installation
KH2380_Content_UK.indd 13 12.09.2006 11:57:12 Uhr
14 GB/IE
cinch plug jack [red / rear right] fs.
Insert the white plug of the cinch connection
cable as far as it will go into the LINE IN L cinch
plug jack [white
/ rear left]
ft.
Then insert the 3.5 mm stereo jack into the
headphone output of the audio device.
In order to play back the sound, press the
LD / MD
button buuntil the letters AUX
appear in the display window.
For operation of the external device, please see
its operating instructions.
L
Connecting to the aerial
of the motor vehicle
Guide the connection cable of the vehicle aerial
carefully out of the front of the DIN assembly
bracket up to the car radio.
Insert the plug of the connection cable of the
vehicle aerial as far as it will go into the aerial
socket
goof the car radio.
If necessary, use an aerial adapter in accordance
with the technical data of the aerial.
If present: Connect the 12 V DC connection cable
of an electric aerial to the electric aerial
fn
plug-in.
L
Attaching to the DIN assembly
bracket
Insert the rear of the car radio together with
the connected cables carefully into the DIN
assembly bracket.
Ensure that no objects are able to cover the
vents of the metal housing
dt.
Ensure that there is no connection cable
between the metal housing
dt and the DIN
assembly bracket. Prevent the cables from
becoming caught, as any damage may result in
a short circuit and malfunctioning of the device
or the vehicle’s electronic system.
Push the car radio into the DIN assembly bracket
until it distinctly locks into place.
You should also secure your device against
theft. Fix the attachment screw
frwith the
anchoring plate and the attachment material to
the engine fire wall of the vehicle.
Ensure that all cables are properly connected
and that the power supply is working correctly.
The LED (red)
/ power supply
dqflashes.
Use the tip of a ballpoint pen to press the reset
button
dron the front of the device (see Fig. C).
L
Attaching the control panel
Remove the control panel 1from the plastic
box.
Avoid hard contact with the display window
3.
Place the rear left-hand edge of the control
panel
1on the control panel attachment point
dpon the front of the device.
Ensure that the plug-in connection strip
cris
positioned in front of the connection socket
dl.
Carefully press the rear right-hand edge of the
control panel
1against the control panel
attachment point
dpuntil it distinctly locks into
place.
Fold the control panel
1upwards and allow it
to lock into place.
L Operation
L Switching on
Press the
PWR / DIM
button cn.
The factory settings of the device are as follows:
The word [WELCOME] appears in the display
window
3.
The buttons are illuminated in blue (these can
be adjusted on two levels).
Installation / Operation
KH2380_Content_UK.indd 14 12.09.2006 11:57:12 Uhr
20 GB/IE
Selecting Folders
You can only use this function with CDs, CD-Rs,
CD-R
Ws, a USB stick or SD / MMC if these contain
MP3 data and are arranged in folder structures.
Press the
A / PS
button cmthree times. The
folder currently being played back is shown in
the display window.
Turn the „SEL / VOL“ control knob
cpand
select the desired folder.
Press the
BD / ENT
button bsand the first track
of the selected folder is played back.
Pause
Press the
1 PAU
button bqto temporarily
interrupt playing.
Press the
1 PAU
button bqagain to resume
play mode.
Repeat
Press the
2 RPT
button bpand the currently
playing track is constantly played. The display
3
reads [RPT ONE]. This is followed by the
repeated play of the current track.
Press the
2 RPT
button bpagain. The display 3
reads [RPT DIR]. This is followed by the
repeated play of the current folder.
Press the
2 RPT
button bpagain. The display 3
reads [RPT ALL]. This is followed by the
repeated play of all tracks.
Interval
Press the
3 INT
button boto play the first
seconds of all tracks.
[INT] appears in the display
3.
Press the
3 INT
button boagain to resume
regular play mode.
[INT] disappears from the display
3.
Random play
Press the
4 RDM
button bnto play the tracks
at random. [RDM] appears in the display
3.
Press the
4 RDM
button bnagain to resume
regular play mode.
[RDM] disappears from the display
3.
Removal
Press the “Open” button
4. The control panel 1
folds towards the front.
Press die CD eject button
dsand the CD, CD-R
or CD-RW is pushed out of the CD compart-
ment
cu. Remove the CD, CD-R or CD-RW
within 5 seconds. Otherwise this is drawn back
into the device.
L
USB Memory Stick, MP3 Player
or SD / MMC
m Caution!
Optimum data transfer at the USB port
docan
only be guaranteed with a USB memory stick.
Due to the large number of USB memory sticks
available it is not possible to guarantee
compatibility with current and future USB
products.
Tipp!
Use the USB memory stick / MP3 player or
SD / MMC in accordance with their operating
instructions!
Insertion
Insert the USB plug of the USB audio storage
medium (MP3 player or USB memory stick)
(with data in MP3 or WMA format) completely
into the USB port
do.
or
Insert the SD / MMC (with data in MP3 or WMA
format) completely into the SD and MMC port
dn
(see illustration on the device).
Please ensure that the flattened corner is facing
downwards and the contact surface to the left.
Playback
Playback begins automatically and the following
information appears in the display window
3:
track, running time, memory frequency, artist and
status of the storage locations.
If the USB stick is already in the USB port
do,
press the
LD / MD
button buuntil [USB]
appears in the display window
3.
or
If there is an SD / MMC (with data in MP3
format) in the SD and MMC port
dn, press the
LD / MD
button buuntil [SD / MMC] appears
Operation
KH2380_Content_UK.indd 20 12.09.2006 11:57:15 Uhr
22 GB/IE
USB ONE - the current track is recorded on
USB.
Press the
BD / ENT
button bs. [RECORD] appears
in the display window
3, followed by [R]
(flashing), information on the storage location
(e.g. [01]) and the length of the recording (e.g.
[19.58]).
Stopping Recording
Press the
BD / ENT
button bs.
Recording from MP3 / WMA-CD
Insert an MP3 / WMA CD into the CD compart
-
ment
cu.
Insert an SD or MMC into the SD and MMC port
dn.
or
Insert a USB memory stick into the USB port
do.
Use the
LD / MD
button buto select CD mode.
Select the track which you would like to record.
Starting Recording
Press the
SCAN
REC•
button btand keep it
pressed for two seconds. [COPY MMC]
appears in the display window
3 (if an SD or
MMC is used).
or
[COPY USB] appears in the display window
3
(if a USB memory stick is used).
The following properties are only possible by
repeatedly pressing the
SCAN
REC•
button bt
(depending on whether an SD / MMC or USB stick is
used)
COPY MMC- the current track is recorded on
SD / MMC.
COPY USB- the current track is recorded on
USB.
Press the
BD / ENT
button bs. [COPY] appears in
the display window
3. Then the percentage of
the storage medium that is used up is displayed.
Stopping Recording
Press the
BD / ENT
button bs.
Starting Delete
Use the
LD / MD
button buto select the
SD / MMC mode.
Press the
SCAN
REC•
button btand keep it
pressed for two seconds. [DELETE] appears in
the display window
3.
Press the
BD / ENT
-Taste bs. The current track is
deleted automatically.
L Promote Control
You can also operate the device with the remote
control.
Tip!
Familiarise yourself with use of the similar buttons
on the remote control (see Fig. F). Please see the
layout of the control panel
1for the functions.
Ensure that the front edge of the remote control is
pointing in the direction of the sensor
coof the
control panel
1.
Please note that the AF function only works
with the
AF
button 7on the control panel 1.
Please also note the modified procedure for:
Adjusting the Volume
Increase the volume by pressing the
VOL+
button gt.
Reduce the volume by pressing the
VOL-
button hm.
Insert the battery
Activate the unlock button
itand pull the
battery holder
isfrom the battery compart-
ment
ir(see Fig. G).
Place a Lithium battery type CR2025, 3 V DC
into the battery holder
isso that one side
marked with “+” faces up. Then slide the
battery holder
isinto the battery compartment
iruntil it distinctly catches.
Operation / Promote Control
KH2380_Content_UK.indd 22 12.09.2006 11:57:16 Uhr
23 GB/IE
L Troubleshooting
E Error e Cause E Remedy
E The device can not be switched on or the
display
3indicates [ERROR].
e
The connections for the 12 V DC power supply
are faulty.
E Check that the wiring of the device is correct
(see the section on “Connecting to the Vehicle’s
12
V DC Power Supply”). Then press the RESET
button
drwith the tip of the ballpoint pen.
or
e
The 10 A euflat blade fuse in the flat blade fuse
socket
etis broken.
E Replace the broken fla
t blade fuse with a new
10 A flat blade fuse. Then press the RESET
button
drwith the tip of the ballpoint pen.
or
e
A 15 A fuse of the fuse holder of the 12 V DC
power supply is broken.
E Replace the broken fuse with a new 1
5 A fuse.
Then press the RESET button
drwith the tip of
the ballpoint pen.
If the fuse is broken again, check that the
wiring is correct.
or
e The device is broken.
E Please contact the ser
vice centre for your
country (see guarantee card).
E The device cannot be operated.
e The control panel
1is wrongly connected.
E Ensure tha
t the control panel 1is correctly
connected (see the section on attaching the
control panel).
or
e
The battery of the remote control is flat.
E Replace the used ba
ttery with a new lithium
battery of type CR2025, 3 V DC.
or
e
The sensor coof the control panel 1and / or
remote control may be dirty.
E Clean the sensor
coof the control panel 1or
the remote control if necessary.
or
e The device is broken.
E Please contact the ser
vice centre for your
country (see guarantee card).
E The stored stations do not remain stored if
the control panel is removed or the engine
turned off.
e
The connections for 12 V constant current fm
and 12 volt ignition current
fphave been
mixed up on the ISO plug in the vehicle
(various layouts of the respective manufactur-
ers). As soon as the ignition is switched off the
internal memory of the radio no longer has any
power supply.
E The colour coding of the sta
ted cables must be
red and yellow. In this case swap over the
connections for 12
V constant current
fmand
12 volt ignition current
fo. Some manufactur-
ers provide the opportunity of swapping the
two cables by means of preassembled plug-in
connectors. A further possibility is to purchase
an additional ISO adapter (plug on socket) with
plug-in connectors from a specialist shop and
also to swap over the two contacts (red and
yellow).
This work should only be carried out by a
professional electrician.
L Maintenance and Service
Switch off the device.
The device is maintenance free.
Clean plastic surfaces of the device and of the
remote control with a dry cloth. Do not use
solvents or other aggressive cleaning agents.
Changing the battery of the remote control
Activate the unlock button
isand pull the
battery holder
irfrom the battery compart-
ment
iq(see Fig. G).
Place a Lithium battery type CR2025, 3 V DC
into the battery holder
irso that one side
marked with “+” faces up. Then slide the
battery holder
irinto the battery compartment
iquntil it distinctly catches.
Troubleshooting / Maintenance and Service
KH2380_Content_UK.indd 23 12.09.2006 11:57:16 Uhr
KH2380_Content_UK.indd 26 12.09.2006 11:57:17 Uhr
28
KH2380_Content_UK.indd 28 12.09.2006 11:57:17 Uhr
KH2380_Cover_UK.indd 6 07.09.2006 14:47:08 Uhr
3

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Silvercrest-KH2380

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest KH2380 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest KH2380 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Silvercrest KH2380

Silvercrest KH2380 Gebruiksaanwijzing - Nederlands - 58 pagina's

Silvercrest KH2380 Gebruiksaanwijzing - Deutsch - 29 pagina's

Silvercrest KH2380 Gebruiksaanwijzing - Français - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info