751808
22
Verklein
Vergroot
Pagina terug
1/81
Pagina verder
GB/IE24
Please note: The unit may produce a slight odour
for a short time when used for the first time.
Start up
Switching on/off
Make sure that the three heat level switches 2, 3
and 4 are set to “0”. Then connect the heater
to a grounded socket protected by a residual-
current device with overload protection. The heating
unit must be freely rotatable.
Now switch on the unit by switching the on/off
switch 4 to the “I” position. To turn off the unit,
switch the on/off switch 4 to the “0” position.
Please note: When the unit is switched on, the middle
heating element is activated.
Heating levels
The halogen heating unit has three different
heating levels: 400W, 800W and 1200W.
The first heating level (400W) is reached when
the unit is switched on. In the process, the central-
heating element is put into operation (see chapter
Switching on/off).
The second heating level (800W) is reached by
additionally switching one of the heating level
switches to on
(
2
or
3
)
.
Please note: The heating level switch
2
switches the
lower heating element on.
The heating level switch
3
switches the upper heating element on.
The third heating level
4
(1200W) is reached by
additionally switching both of the heating level switch-
es to on (
2
&
3
).
Oscillation
Set the oscillation switch
1 to “I” to activate the
function. The heater fan will begin to move from
side to side.
To disable the oscillation, switch the oscillation
switch
1 to “0”.
 Overheating protection
This unit is equipped with an overheating protection
device. If the unit is too hot, the heating element switches
off automatically. Turn the unit OFF by turning the
heating level switch to “0” and pull the power plug
out of the socket. Please note: If the overheating pro-
tection is triggered, you should turn OFF the unit and
contact the service hotline (see chapter “Service”).
Tip-over protection
This unit is equipped with a tip-over protection device.
This is located in the base of the unit. If the unit is
inadvertently knocked over or tilted heavily during
operation, it will switch off automatically. The unit is
only functional in an upright position.
Maintenance, Cleaning
and Storage
Always disconnect the power plug when the device
is not in use and before any cleaning or in the
event of operating faults!
Clean the device only when it is turned OFF and
in a cooled condition.
Ensure that no moisture penetrates into the device
in order to avoid irreparable damage.
Clean the housing with a soft dry cloth only.
Do not use aggressive and/or abrasive cleaning
agents.
Remove dust deposits from the protective grille
with a vacuum cleaner.
Store the device in a dry room.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest IAN 322112 SHH 1200 D2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest IAN 322112 SHH 1200 D2 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools, Zweeds als bijlage per email.

De handleiding is 3,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info