752591
30
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
28 GB
3. Put the food dehydrator trays|3 and the
top food dehydrator tray|2 on the de-
vice.
4. Mount the lid|1.
8.2 Make settings and start
the food dehydration
process
NOTE: for reference values of the drying
temperature, the drying time and the dehy-
dration test, please refer to chapter "Food ta-
bles" on page 25.
1. Insert the mains plug|4 into a wall sock-
et corresponding to the specifications of
the rating plate. On the display|13 00
flashes and Hr is shown.
2. Using the buttons |15 and +|16 set
the drying time between 1 and 48
hours (01 Hr to 48 Hr) in 1-hour incre-
ments.
3. Briefly press the button |14 once to
switch to the temperature setting. On the
display 55 flashes and °C is shown.
4. In order to change the unit of the tem-
perature between °C and °F, keep the
button |14 pressed.
5. Using the buttons |15 and +|16 to
set the drying temperature between
40 °C and 70 °C (or between 100 °F
and 160 °F) in 5°-increments.
6.
Briefly press the button |
17
once
to
start the food dehydration process.
The fan|9 starts. On the display|13, the
clock symbol is shown, indicating al-
ternatively the set temperature and the
remaining drying time. The drying time
is shown in hours (Hr), within the last
hour in minutes (Min).
7. Once the time set has elapsed, the de-
vice switches off. The fan|9 stops. On
the display|13 00 is shown steadily.
8. Check the dehydrated food applying
the dehydration test (see “Food tables”
on page 25). If the dehydrated food
has not yet been dried sufficiently, start
the food dehydration process again for
another shorter drying time.
9. Once the time set has elapsed, the de-
vice switches off. The fan|9 stops. For a
brief time, an audio signal will sound
and the display|13 will show 00 contin-
uously.
10.After the completion of the food dehy-
dration process, disconnect the mains
plug|4.
8.3 Changing the setting
during the food
dehydration process
During the dehydration process, you can
change the setting of drying time and drying
temperature at any time.
1. Press the button |14 briefly. The re-
maining time flashes on the display|13.
2. As long as the value on the display|13
flashes (approx. 2 seconds), you are
able to change it by pressing the but-
tons |15 and +|16 .
NOTE: even if the remaining time has been
shown in minutes during the past hour, the
drying time can only be changed in hourly
increments.
3.
Briefly press the button |
14
once
to
switch to the temperature setting. As
long as the value on the display flashes
(approx. 2 seconds), you can change
the temperature setting by pressing the
buttons |15 and +|16 .
4. After approx. 2 seconds, the values will
be stored and shown steadily.
30

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Silvercrest-IAN-314663-SDA-350-A2

Zoeken resetten

  • Na het instellen van programma, tijd en temperatuur en druk op start geeft de display Er aan.
    Heb in de handleiding naar probleemoplossingen gekeken maar daar er niets van vermeld. Gesteld op 2-2-2023 om 10:58

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest IAN 314663 SDA 350 A2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest IAN 314663 SDA 350 A2 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools, Zweeds als bijlage per email.

De handleiding is 2,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info