685067
9
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
1716
English
English
12. Troubleshooting
12.1. “My Flash&Go™ does not start.
Make sure the power cord is properly connected to the Flash&Go™ device.
Make sure the power cord is plugged into an electrical outlet on the wall.
12.2. A light pulse is not emitted when I press the PULSE TRIGGER”
Make sure the Ready Indicator is blinking.
Make sure you have good contact with the skin and that the treatment surface is evenly and firmly pressed to
the skin. For your safety, the Pulse trigger will activate a pulse only if the treatment surface is firmly pressed
against the skin.
Check the Indicator Light. If it blinks slowly, the Skin Color sensor has stopped the light pulse; the skin color
window was not properly covered by the skin or your skin may be too dark for you to use Flash&Go™. Try
to apply Flash&Go™ again on a dierent part of your body.
If the Ready light is o, together with any number of blinking Energy Level light indicators, you have a system
error. If this problem persists, contact your local Flash&Go™ Customer Service Center.
If these problems persist, contact your local Flash&Go™ Customer Service Center.
Check if the System Warning Indicator Light is on, and all other lights are blinking. If so, unplug the
device from its power source. The device has reached its End of Life stage. Please refer to section 11 –
“Flash&Go™ Maintenance” for further instructions on how to safely dispose of the device.
Do not attempt to open or repair your Flash&Go™ device. Only authorized
Flash&Go™ repair centers are permitted to perform repairs.
Opening Flash&Go™ may expose you to dangerous electrical components and to pulsed light energy, either of
which may cause bodily damage and/or eye injury.
Trying to open Flash&Go™ may also damage the device and will void your warranty.
Please contact Flash&Go™ Customer Service if you have a broken or damaged device in need of repair.
13. Customer Service
For more information about Silk’n™ products please enter your local Silk’n™ website, www.silkn.com.
If your device is broken, damaged, in need of repair, or for any other user assistance, please contact your
local Silk’n™ Customer Service:
For USA and Canada customers: 1-877-DO-SILKN / 1-877-367-4556, contact@silkn.com
14. Specifications
Spot size 0.9cm x 3cm [2.7cm²]
Technology New Home Pulsed Light™
Pulse Duration 500 – 800 μsec
Wavelength
475-1200nm
Power Output 3-5 J/cm
2
Charging time / Power source Continuous operation
Time needed to treat lower legs 30 minutes
Operation and Safety Skin Color Sensor seamlessly ensures use only on appropriate skin types.
Classified standard
IEC 60601-2-57:2011
Risk Group Exempt
Package size Height 9 inch, Width 9 inch, Depth 5.2 inch180x180x100mm
System weight 200 gr.
Temperature
Operating 10°C to 35°C
Storage -40 to +70°C
Humidity
Operating 30 to 75% RH
Storage 10 to 90% RH
Atmospheric pressure
Operating 700 to 1060hPa
Storage 500 to 1060hPa
Adaptor
Rated
Model: KSA24A1200150HU KSAPV0361200300DS
100-240V ; 50-60Hz 0.5A 100-240V ; 50-60Hz 0.9A
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silkn Flash and Go Compact bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silkn Flash and Go Compact in de taal/talen: Engels als bijlage per email.

De handleiding is 0,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info