609122
1
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
1
English
Silk’n Flash&Go™ Setup
1. Remove Silk’n Flash&Go™ Hair Removal Unit and other components from box.
2. Verify that the Disposable Lamp Cartridge is inserted properly at the tip of the device.
3. Plug the Adaptor cord into the Silk’n Flash&Go™ Hair Removal Unit socket.
4. Plug the Adaptor into an electrical outlet. The Stand By Indicator Light will turn on.
Your Silk’n Flash&Go™ is now ready to start.
Treating with Silk’n™ Flash&Go for the first time
The skin should be shaved, clean, dry and free of any powders, antiperspirants or deodorants.
5. Press the On/Stby Switch. The Power On Indicator Light will turn on and a fan sound (similar to the sound of a hairdryer)
will start.
6. Approximately 3.5 seconds after pressing the On/Stby Switch, the Ready Indicator Light will turn on. The device sets itself
to deliver the lowest energy level pulses. The device is then ready for you to trigger the first pulse.
7. If the energy level should be higher than the lowest, press the Energy Level Setting Buttons using the “-“ or “+” to respectively
decrease or increase the energy level, until the desired energy level is set. Energy Level Indicator Lights will coincide with the energy
level setting. (See “Energy Level” frame).
8. Apply the Treatment Surface firmly to the skin, making sure the skin is spread evenly and smoothly. As soon as the Treatment
Surface is in full contact with the skin, the Ready Indicator Light will start blinking.
9. Press the Pulse Button. The device will first determine the color of your skin.
If the color of the skin is light enough for safe application, the device will flash a pulse of light onto your skin, and the Ready Indicator
Light will turn off.
You will see a bright flash of light and simultaneously hear a subtle pop sound, which is a normal noise for the device. You may feel
a mild sensation of warmth and tingling.
Silk’n Flash&Go™ will immediately recharge for the next pulse. After 3.5 seconds the Ready Indicator Light will turn on again.
If you see no light pulse and the Skin Tone Warning Indicator Light blinks your skin tone, measured by the Skin Color Sensor, is
too dark for safe application. Try using the device on a different body part or contact the Silk’n™ support (See: “The Skin Color
Sensor” frame)
10. Remove the Treatment Surface from the treated area of skin.
11. Move the Treatment Surface to another area of skin. Use the pressure marks the device just made on your skin to guide
you for proper positioning of the next pulse, avoiding both gaps and overlaps between pulses (See “Covering skin areas” frame).
Warning: Do not treat the same area of skin more than once per hair removal session! Treating the same area of skin more than
once per session increases the likelihood of adverse effects.
12. Repeat the process starting again with Step 5.
Plan your Silk’n Flash&Go™ hair removal for best results
Typical Silk’n Flash&Go™ hair removal plan during a full hair growth cycle:
The first 3-4 hair removal sessions with Silk’n Flash&Go™ will be approximately two weeks apart.
Hair removal sessions 5-7 with Silk’n Flash&Go™ will be approximately four weeks apart.
After that you will typically use Silk’n Flash&Go™ again from time to time if and when needed, until long-term results are achieved.
Typical maintenance with Silk’n Flash&Go™ after achieving long-term hair removal:
Due to hormonal or other physiological changes dormant hair follicles may become active. Maintenance hair removal sessions
with Silk’n Flash&Go™ may be required from time to time.
Quick Start
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silkn AS102275A Flash and Go bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silkn AS102275A Flash and Go in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Silkn AS102275A Flash and Go

Silkn AS102275A Flash and Go Gebruiksaanwijzing - English, Français, Espanõl - 61 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info