21
6. Once the rewriting finishes, the dialog box for confirmation appears. Then, click [Close] and remove the
lens.
7. After customization, please check the performance of the lens by test shooting. If necessary, connect the
lens again to have further customization.
CAUTION !!
Do not remove the lens or press the detachment button while updating firmware.
Do not turn off the computer while updating firmware.
Do not customize or change the current setting of the lens while updating firmware.
In case updating firmware finishes unsuccessfully, a message [Rewriting the setting of the lens is
incomplete.] appears in the dialog box. Follow the instructions [RESET ALL CUSTOMIZATION] and proceed
resetting the customization.
To Reset the Customization
1. Click [Reset to Default] and the confirmation dialog box will appear.
2. Click [Yes] and all values become 0.
3. Click the [Rewriting] button and the dialog box for confirmation will appear.
4. Carefully read the content in the dialog box, and click [Agree] to process the customization, or click [Return]
to not process the customization.
5. Once the rewriting finishes, the dialog box for confirmation appears. Then, click [Close] and remove the
lens.
