668520
7
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
START WELDING
- 7 -
OPERATION
IMPORTANT! Always perform sample welds before welding actual production membrane to
ensure proper setting of temperature, air ow and speed. See test and control of welding seam.
If you are welding at an angle,
adjust the front wheels by turning the
front wheel adjustment knob located
at the base of the frame until you
achieve proper, straight movement of
the machine.
Release the welding nozzle with the trigger, then lower and guide it to the
left underneath the overlapping membrane until it locks. The machine will start
automatically when the nozzle is in its locked position. For instruction on how
to stop the machine, please see section on “Stopping the machine and cooling
down”. If the automatic system is failing, you can start and stop the machine
manually with the run button.
!
The machine is equipped with adjustable front wheels to avoid sliding when welding at different angles.
The front wheels are preset in the factory for welding in a horizontal position.
1
2
3
TEST AND CONTROL OF THE WELDING SEAM
Always conduct test welds before you begin any
job. Materials will vary between manufacturers
therefore the machine settings will vary as well.
Always check with the material manufacturer for
the proper specications and machine settings
for their material. It should be noted that ambient
temperature plays a large part in the machine
settings. The warmer it is outside the faster you
can run the machine. If you are welding in cold
climates, you will have to slow the machine and
increase the temperature. Additional weights for
the machine are available to add if needed. Start
your test weld without the weights and add them
accordingly until you achieve an optimum weld.
Set the machine´s temperature, speed, and weight
according to the manufacturers specications and
environmental/ambient conditions. Run test welds
and take samples before production welding.
Test the welds to ensure that the tests are within
manufacturer specications. Save the test samples
for proof that you conducted test welds before you
started the job. Test welds should be done again
if the environmental/ambient conditions change
during the day.
By means of visual inspection you can check the
quality of the welds. The material must be welded
all the way to the edge of the overlap. This can be
checked with a probe tool, similar to an awe. Run
the probe along the seam to test the integrity of your
welds. With PVC you will nd a bead of PVC that
has formed along the seam, called bleed through.
This is acceptable and indicates a proper weld, as
long as it is not darkened or shows any burning.
With TPO materials you will not see this bead.
GB
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sievert TW-5000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sievert TW-5000 in de taal/talen: Nederlands, Duits, Engels, Frans, Zweeds als bijlage per email.

De handleiding is 1,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info