Service Programmes
Tip: Refer also to the quick reference guide
in the storage compartment 24.
At regular intervals, the display 5 shows the
following texts:
SERVICE - DESCALE or
SERVICE - CLEAN or
SERVICE - CALC‘N‘CLEAN.
The appliance should be cleaned or
descaled immediately using the
corresponding program. You also have the
option of combining both processes with the
Calc‘n‘Clean function (see “Calc‘n‘Clean”).
If the service program is not run as
instructed, the appliance may be damaged.
Warning
Each time you run the service program,
you should follow the instructions for using
the descaling and cleaning agents.
Never interrupt the service program!
Do not drink the liquids!
Never use vinegar, vinegar-based products,
citric acid or citric acid-based products!
Never put descaling tablets or other descal-
ing agents in the ground coffee drawer or
the drawer for cleaning tablets 20!
For descaling, use only the descaling
tablets included with the appliance. They
have been developed specially for this coffee
machine to optimize the descaling process.
Specially developed descaling and
cleaning tablets are available from
retailers or customer service.
Order number Retail Customer
service
Cleaning
tablets
TZ60001 310575
Descaling
tablets
TZ60002 310967
Important:
tank 11, it needs to be removed before the
service program is run.
Descaling
ESPRESSO Ë Í
SERVICE - DESCALE
i - BUTTON 3 SEC.
The
start
button 8
descaling processes are running.
progress of the program.
Hold the j button 7 down for at least 3
seconds.
DESCALE
START
Press the
start
button 8; the display 5 will
guide you through the program.
EMPTY DRIP TRAY
REPLACE DRIP TRAY
Empty drip tray 27 and replace them.
PLACE 0.5 L CONTAINER UNDER MILK
FROTHER
START
Place a container with a capacity of 0.5
litres under the milk frother 10.
Press the
start
button 8.
Note:
then press the
start
button 8 again
REMOVE FILTER
START
ADD 0.5 L WATER AND DESCALER
START
Pour lukewarm water into the empty
water tank 11 up to the “0.5” litre mark
and dissolve 2 Siemens descaling tablets
in it.
Press the
start
button 8. The descaling
program will now run for about 20
minutes.
DESCALING
