Before using
General
Fill the water tank with fresh, uncarbonated
water only, and preferably use only beans
for fully automatic coffee and espresso
machines. Do not use coffee beans that
have been glazed, caramelized or treated
with other additives containing sugar, since
they will block the brewing unit.
The water hardness setting can be adjusted
on this appliance. The factory default setting
for the water hardness is 4. Check the
water hardness with the enclosed test strip.
If a value other than water hardness 4 is
displayed, change the setting on the
appliance accordingly after switching on
(see “Menu settings
WATER HARDNESS”).
Switching on the appliance
Place the fully automatic espresso
weight.
Note: The appliance has four runners under
its base and can be moved sideways in an
arc to make operation and positioning
easier.
Pull the power cord out of the storage
compartment 31 and plug in. Adjust the
length of the cable by pushing it back in
or pulling it out. The easiest way to do
this is to place the appliance so that its
and either pull the cable downward or
push it upward.
Lift the lid of the water tank 12.
Remove and rinse the water tank 11 and
max” mark.
Replace the water tank 11 and push it
Close the lid of the water tank 12 again.
Fill the bean container 15 with coffee
beans.
Press the power switch 1 O / I. The
start
button 8 lights up and the different
languages appear in the display 5.
Use the buttons 4 < and > to select the
language in which you want the display 5
texts to appear.
The selected language is highlighted by a
frame. The following languages can be
selected:
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
start
button 8. The language
you selected is saved and the a button 2
lights up.
a button 2. The brand logo
lights up in the display 5. The appliance
now heats up and rinses. Some water will
run out of the coffee outlet 9. The
appliance is ready for use when the
symbols for selecting the type of coffee
preparation appear in the display 5.
ESPRESSO Ë Í
 à À Á Å Æ
