Installation and connection
The appliance must be connected to the mains by a
licensed expert. The regulations of your electricity
supplier must be observed.
Any damage arising from the appliance being
connected incorrectly will invalidate the guarantee.
An allĆpole isolating switch must be present on the
installation side with a contact gap of at least 3 mm.
This is not necessary if the appliance is connected by
a plug that is accessible to the user.
Appliances with plugs must only be connected to
properly installed earthed sockets.
Electrical safety: The cooker corresponds to safety
class I and may only be used in conjunction with a
safety earth terminal.
A type H 05 VVĆF or equalĆrated lead must be used to
connect the appliance.
Always place the cooker directly on the floor.
The cooker has heightĆadjustable feet. This allows
you to raise the plinth by about 15 mm.
Please observe the special installation instructions.
To prevent the cooker from tipping over, you must fix
it to the wall at the enclosed angle. Please observe the
installation instructions for fixing the oven to the wall.
Electrical connection
For the installer
Safety precautions
Levelling the cooker
Wall fixing