298541
1
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
1
Gigaset A120/A120A/A220/A220A
The handset at a glance
1 Charge status of the batteries:
= e V U
(flat to full)
= flashes: batteries almost flat
e V U flashes: charging
2 Answering machine icon (A120A/
A220A only)
3Display keys
4 End call key and On/Off key
5 Talk key/Handsfree key
6 Control key (
u)
7 Directory key (press down on the
control key)
8 Key 1
Open the answering machine
(A120A/A220A only)/network mailbox
9 Star key
Ringers on/off (press and hold); with
an open connection: switch from pulse
dialling to tone dialling (press briefly)
10 Key 0/recall key
Consultation call (flash): press and hold
11 Hash key
Keypad lock on/off (press and hold);
toggles between upper/lower case
and digits; inserts a dialling pause
(press and hold)
12 Microphone
(handsfree mode A220/A220A only)
A120/A120A A220/A220A
1 ±V
11.12. 11:56
INT MENU
1
2
3
4
5
6
7
8
9
10
11
12
Please note
New messages in the calls list/answering machine list/network mailbox list
(¢ page 6) are indicated in the display by the message New messages.
Display keys:
Pressing a key launches the function that appears above
that key in the display.
Gigaset service contact numbers:
For personal advice on our range of products and for repairs or guarantee/warranty claims
call:
Service Centre UK: 020 369 53111 (local call cost charge)
Service Centre IE: 0818 200 033 (6.6561 Ct./Call)
Please have your proof of purchase ready when calling.
Display Function when pressed
INT Call other registered handsets ¢ page 9.
MENU Open main/submenu (see menu overview
¢ page 15).
Go back one menu level.
U
Scroll up/down or adjust volume with u.
T
Move cursor to left/right with u.
˜
Backspace deletes one character at a time.
OK Confirm menu function or save entry.
ECO DECT
During a call, the level of the handset's radio signal adjusts automatically according to
the distance between the handset and base station: the shorter the distance, the lower
the signal strength (radiation).
The handsets radio signal is switched off when it is in standby mode. The base station,
however, maintains contact with the handset with fewer radio signals.
In addition, the base station radio signals are switched off when the No Radiation
setting is enabled.
MENU ¤ u Settings ¤ OK ¤ u Base ¤ OK ¤ u ECO DECT ¤ OK ¤ No Radiation
¤ OK (= radiation switched off, icon ½ in the left-hand corner of the display)
Please note
All registered handsets must support this feature.
For quick connection of incoming calls the handset repeatedly switches to recep-
tion mode for short periods. This increases energy consumption and therefore
reduces the standby and talk times.
The base station at a
glance
Registration/paging key:
Search for handsets (press
briefly, "Paging"
¢ page 9)
Register handsets (press and
hold
¢ page 9).
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
2
Safety precautions
a
- Read the safety precautions and the user guide before use.
- Explain their content and the potential hazards associated with using the
device to your children.
- The device cannot be used in the event of a power failure. In case of a power
failure it is also not possible to make emergency calls.
-Emergency numbers cannot be dialled if the keypad/display lock is activa-
ted!
Do not use the devices in environments with a potential explosion hazard
(e.g. paint shops).
The devices are not splashproof. For this reason do not install them in a damp
environment such as bathrooms or shower rooms.
Use only the power adapter indicated on the device.
Use only rechargeable batteries that correspond to the specification (see
"Specifications"). Never use a conventional (non-rechargeable) battery or other
battery types as this could result in significant health risks and personal injury.
Rechargeable batteries, which are noticeably damaged, must be replaced.
If you give your Gigaset to a third party, make sure you also give them the user
guide.
Remove faulty devices from use or have them repaired by our Service team, as
these could interfere with other wireless services.
Do not use the device if the display is cracked or broken. Broken glass or plastic
can cause injury to hands and face. Send the device to our Service department to
be repaired.
First steps
Check the pack contents
One Gigaset A120/A120A/A220/A220A base station, one mains adapter, one Gigaset
handset, one phone cord, two batteries, one battery cover, one user guide.
If you have purchased a model with multiple handsets, the package should contain
two batteries, a battery cover and a charging cradle with mains adapter for each addi
-
tional handset.
Setting up the base station and charging cradle (if included)
Set up the base station at a central location on a flat, non-slip surface in your house
or apartment. You can also mount the base station and charging cradle on the
wall.
Pay attention to the range of the base station. This is up to 300 m in unobstructed
outdoor areas and up to 50
m inside buildings.
The base station and charging cradle are designed for use in enclosed dry rooms
in a temperature range of +5
°C to +45 °C.
Care: Wipe down the base station and handset with a damp cloth (no solvents) or
an antistatic cloth.
Never use a dry cloth. This can cause static.
Do not hold the rear of the handset to your ear when it is ringing or when speaker
mode is activated. Otherwise you risk serious and permanent damage to your
hearing.
Your Gigaset is compatible with the majority of digital hearing aids on the market.
However, perfect function with all hearing aids cannot be guaranteed.
The phone may cause interference in analogue hearing aids (humming or
whistling) or cause them to overload. If you require assistance, please contact the
hearing aid supplier.
Using your telephone may affect nearby medical equipment. Be aware of the
technical conditions in your particular environment, e.g. doctor's surgery. If you
use a medical device (e.g. a pacemaker), please contact the device manufacturer.
They will be able to advise you regarding the susceptibility of the device to
external sources of high frequency energy (for the specifications of your Gigaset
product see "Specifications").
To prevent loss of hearing, avoid listening at high volume over long periods of
time.
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
3
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the risk
of marks on the surfaces cannot be completely ruled out.
Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
Protect your Gigaset from moisture, dust, corrosive liquids and vapours.
Connecting the base station
¤ First connect the mains adapter
1.
¤ Then connect the telephone
jack
2 and insert the cables
into the cable ducts.
Please note:
The mains adapter must always
be connected, as the phone will
not operate without mains con
-
nection.
Use only the mains adapter and phone cord supplied. Pin connections on tele-
phone cables can vary.
The answering machine (A120A/A220A only) is ready for use approx. 30 seconds
after the base has been connected.
Connecting the charging cradle (if included)
1
1
1
2
¤ Connect the flat plug to the power
supply
1.
¤ Plug the mains adapter into the plug
socket
2.
If you need to disconnect
the plug from the charg-
ing cradle, press the
release button
3 and
disconnect the plug
4.
1
2
3
4
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries and closing the battery cover
Warning
Use only the rechargeable batteries recommended by Gigaset Communications
GmbH
(¢ page 11), i.e. never use conventional (non-rechargeable) batteries as
this could result in significant health risks and personal injury. For example, the
batteries could explode. The phone could also malfunction or be damaged as a
result of using batteries that are not of the recommended type.
¤ Insert the batteries with
the polarity in the correct
direction.
The polarity is indicated in the
battery compartment.
¤ First insert the battery cover at the top a.
¤ Then press the cover b until it clicks into
place.
¤ To reopen the battery cover, grip into the
cavity on the casing, then pull the battery
cover in an upward direction.
a
b
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
4
Initial charging and discharging of the batteries
The correct charge status can only be displayed if the batteries are first fully charged
and discharged.
Please note
The handset is pre-registered with the base. If you have purchased a
model with multiple handsets, all handsets will already be registered
with the base. You do not need to register the handset again. The internal
handset number appears in the top left of the display, e.g.
1 (¢ page 1).
However, if a handset is not registered with the base (Register HS or Put
into base
is displayed), please register the handset manually (¢ page 9).
If you have purchased multiple devices, you can upgrade your Gigaset to
a cordless PABX by registering
all A120/A220 handsets at the same base
(¢ page 9).
After the first battery charge and discharge, you may place your handset
in the charger after every call.
Always repeat the charging and discharging procedure if you remove the
batteries from the handset and reinsert them.
The batteries may warm up during charging. This is not dangerous.
After a while, the charge capacity of the batteries will decrease for techni-
cal reasons.
6.5
h
¤ Charge the handset in the base for 6.5 hours.
¤ After charging, remove the handset from the
base and only replace it when the batteries are
fully discharged.
Please note
The handset must only be placed in the desig-
nated Gigaset base or charging cradle.
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
MENU ¤ u Settings ¤ OK ¤ Date/Time ¤ OK ¤ Date ¤ ~ (enter the day,
month and year in 6-digit format)
¤ OK ¤ Time ¤ ~ (enter hours and minutes in 4-
digit format)
¤ OK (display message: Saved)
¤ a (press and hold to return to idle status)
When entering the time and date, you can move the position of an entry to the left or
right by pressing the control key
u up or down.
Please note
If your phone receives the date and time during calling line display (e.g., via your
network provider, a router or PABXs), you can specify whether this data should be
copied to your phone:
¤ Press the key sequence: MENU ¤
P#Q5#MI
The following is displayed;
the current setting flashes:
¤ Press one of the following keys to specify, when this data should be copied to
your phone:
Q Never
or
1 Once, in case the date/time is not set on your phone
or
2 Always
Your selection is displayed (e.g. 2):
¤ Press the display key OK.
973 SET:
[
0
]
© Gigaset Communications GmbH 2014
All rights reserved. Subject to availability.
Rights of modification reserved.
www.gigaset.com
Issued by
Gigaset Communications GmbH
Frankenstr. 2a, 46395 Bocholt.
Germany
Version: 01.09.2014
A31008-M2401-L101-2-7619
*A31008-M2401-L101-2-7619*
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
5
Activating/deactivating the handset
Press and hold the a key to activate or deactivate the handset. If you place a deacti-
vated handset in the base station or charging cradle, it will automatically activate after
approx. 30 seconds.
If you remove the handset from the base station/charging cradle, the display turns off
briefly.
Making calls
Making external calls and ending calls
External calls are calls using the public telephone network.
~
(Enter the phone number) ¤ b.
The phone number is dialled. (Or you can first press and hold talk key b [dial tone]
and then enter the number.) During the call you can adjust the earpiece volume using
t and set the volume with u.
End the call/cancel dialling: Press the end call key a.
You can automatically insert a network provider dialling code before any phone num-
ber (¢ page 5).
Accepting a call
Press the talk key b to accept the call.
When Auto Answer is activated (see menu overview ¢ page 15), simply remove the
handset from the base station/charging cradle.
Calling Line Identification
When you get a call, the caller's number will be displayed on your handset; the caller's
name will be displayed if it is stored in the directory.
Prerequisites:
1 You have asked your network provider for the caller's number (CLIP) to be dis-
played on your handset screen.
2 The caller has asked the network provider for his/her number to be identified (CLI).
External call appears in the display if you have not requested CLIP, Withheld appears
if the caller has withheld CLI, and
Unavailable appears if CLI has not been requested.
Handsfree operation (Gigaset A220/A220A only)
In handsfree mode, you activate the loudspeaker so that you can hear the caller with-
out having to hold the handset to your ear. During a call and when listening to the
answering machine (Gigaset A220A only) you activate or deactivate handsfree mode
by pressing the handsfree key
d.
For instructions on adjusting the handsfree mode volume see menu overview
¢ page 15.
Automatic network provider preselection
You can store a call-by-call number (preselection number), which is automatically
placed in front of numbers when you dial them. If, for example, you wish to make inter
-
national calls via special network providers, you can save the relevant dialling code
here.
In the "With Preselect" list, specify the dialling codes or the first digits of the dialling
codes that you wish to assign to the preselection number.
In the "Without Presel" list, enter any exceptions to the "With Preselect" list.
Enter preselection number via menu (¢ page 15).
Permanently deactivating preselection: Delete the preselection number with ˜.
Temporarily cancelling preselection:
(press and hold) ¤ MENU ¤ q Preselect off ¤ OK ¤ ~ (enter number) or s
(use number from directory) ¤ The number is dialled without Preselection.
Example:
Presel. Number 0999
With Preselect 08
Without Presel 081
084
Phone
number
Dialled
number
07112345
¤
07112345
08912345
¤
0999 08912345
All numbers that start
with 08, except for 081
and 084, are dialled
with the preselection
number 0999.
b
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
6
Using the directory and lists
Directory
To open the directory: press control key s.
You can save up to 50 (A120/A120A) or 80 (A220/A220A) phone numbers (max. 22 dig-
its) with corresponding names (max. 14 characters).
Enter letters/characters ¢ page 11.
Storing the first number in the directory
s ¤ New Entry? ¤ OK ¤ ~ (enter number) ¤ OK ¤ ~ (enter name) ¤ OK
Storing further numbers in the directory
s ¤ MENU ¤ New Entry ¤ OK ¤ ~ (enter number) ¤ OK ¤ ~ (enter name)
¤ OK
Selecting a directory entry
Open the directory with s. You have the following options:
Use u to scroll through the entries until the required name is selected.
Enter the first character of the name and scroll to the entry with u, if required.
Dialling with the directory
s ¤ u (select entry) ¤ b
Using other functions
s ¤ u (select entry) ¤ MENU
The following functions can be selected with u: New Entry/Show Number/Edit
Entry/Use Number/Delete Entry/Send Entry/Delete List/Send List/Shortcut
Sending the directory to another handset
Prerequisites:
The sending and receiving handsets must both be registered to the same base sta-
tion.
The other handset and the base station can send and receive directory entries.
s ¤ u (select entry) ¤ MENU ¤ u Send Entry/Send List ¤ OK
¤ ~ (enter the internal number of the receiving handset) ¤ OK
Using shortcut keys
You can assign directory entries to the keys 2–9:
s ¤ u (select entry) ¤ MENU ¤ u Shortcut ¤ OK
¤ u (select key) ¤ OK or ~ (press the key you want to assign the entry to)
To dial, press and hold the required shortcut key.
Last number redial list
This list contains the ten last dialled numbers.
Dialling from the last number redial list
b (press briefly) ¤ u (select entry) ¤ b
Managing entries in the last number redial list
b (press briefly) ¤ u (select entry) ¤ MENU
The following functions can be selected with u: Use Number/Copy to Dir./Delete
Entry/Delete List
Calls list/answering machine list/network mailbox list
Press MENU ¤ Messages ¤ OK, to open the list overview. If you have new messages,
only lists with new messages are displayed. Scroll through the lists by pressing
u.
An advisory tone sounds as soon as a new entry appears in the calls list/answering
machine list/network mailbox list.
New messages appears in the display.
Calls list
Prerequisites: CLIP (¢ page 5)
Depending on the type of list set, the calls list contains (¢ page 15) answered calls,
missed calls and calls recorded from the answering machine (A120A/A220A only).
Depending on the type of list set, all numbers of the last 25 incoming calls are saved
or just the missed calls are saved.
Open the calls list
MENU ¤ Messages ¤ OK ¤ u CallsList
The calls list is displayed as follows:
Number of new entries + number of old, read entries
Press OK to open the list.
The last incoming call is displayed. If necessary, use u to select another entry.
Using other functions
u (select entry) ¤ MENU
The following functions can be selected with u: Delete Entry/Copy to Dir./Date/
Time/Status/Delete List
Please note
If calls are saved in the network mailbox, you will receive a message if the appro-
priate settings have been made (depending on your network provider).
CallsList 01+02
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
7
Calling back a caller from the calls list
MENU ¤ Messages ¤ CallsList 01+02 ¤ OK ¤ u (select entry) ¤ b
Answering machine list (A120A/A220A only)/network mailbox list
You can use these lists to listen to messages on the answering machine (see "Playing
back/deleting messages" ¢ page 7) or network mailbox (¢ page 9).
Operating the answering machine (A120A/A220A only)
The answering machine is operated from the handset. You can record your own
announcement messages using the handset. The pre-recorded announcement is used
if no personal announcement is available.
If the memory is full, Memory full! appears in the display and the answering machine
switches itself off automatically. It activates again automatically when you delete old
messages.
The answering machine has already been preset at the factory. Make individual set-
tings using the handset.
How to set a delay time (time period after which you would like the answering
machine to answer a call), as well as how to set the
recording length and activate call
screening
during the recording, see menu overview ¢ page 15.
Activating/deactivating the answering machine
MENU ¤ u Answer Machine ¤ OK ¤ u Answer Mach. ¤ OK (
= on)
When you switch on the answering machine, the ± icon appears in the display.
Recording your own announcement
MENU ¤ u Answer Machine ¤ OK ¤ u Announcements ¤ OK ¤ Rec announce
¤ OK ¤ Speak after OK ¤ OK
You hear the ready tone (short tone). Now say your announcement (at least 3 sec.).
Press
OK to confirm or press a or to reject your recording. After recording, the
announcement is played back for you to check.
Please note:
Recording ends automatically when the max. recording time of 170 seconds is
reached or if there is a break in speaking of more than 2
seconds.
Playing back or deleting announcements
See menu overview ¢ page 15.
Playing back/deleting messages
There are three ways to start playing back messages on the answering machine.
Start message playback via the Answer Machine menu:
MENU ¤ u Answer Machine ¤ OK ¤ u Play Messages ¤ OK
If you have entered a number for the network mailbox you still need to select the
answering machine:
¤ u Answer Mach. ¤ OK
Start message playback via the answering machine list:
MENU ¤ Messages ¤ OK ¤ u Ans.Mach.
The list is displayed as follows:
Number of new messages + number of old, played back messages
Press OK to open the list.
Fast access to the answering machine:
To access the answering machine, simply press and hold the 1 key. The inte-
grated answering machine has already been preset at the factory. However, if you
have set the network mailbox for fast access, you can change this setting
(¢ page 15).
If you have new messages, playback will start with the first new message, otherwise
with the first old message.
Gigaset A220A only: The loudspeaker on the handset switches on automatically. To
switch it off, press the handsfree key
d.
Messages consist of
the message header (number/date/time) and
the message body (recorded text).
The header is played back first, then the body. The phone number or the name is dis-
played.
Ans.Mach. 01+02
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
8
Stopping and controlling playback
Controlling playback depends on the point in time at which the corresponding key is
pressed.
During message playback:
Additional functions during message playback
Press the display key MENU. Playback stops.
Select the relevant function using u: Dial Number/Continue/Handset Volume/
Copy to Dir./Delete all old
Deleting an individual message
During playback: Press key Q or the display key ˜.
Deleting all old messages
During playback or pause:
MENU ¤ u Delete all old ¤ OK (Confirm the security prompt)
Accepting a call from the answering machine
You can accept a call while the answering machine is recording the caller's message:
MENU ¤ Accept ¤ OK
You can also accept the call by:
pressing the talk key
removing the handset from the base/charger (if Auto Answer is activated
¢ page 15)
2
Pause playback. Press 2 again to resume.
t or 1
During playback of message header: Go to the start of the previous
message. Skipping back from the first message jumps to the last
message.
During playback of message body: Go to the start of the current
message.
s or I
Go to the start of the next message. Skipping forward from the last
message jumps to the first message.
L
During playback of message header: Skip header.
During playback of message body: Go to the body of the next
message. Skipping forward from the last message jumps to the first
message.
b
Recording stops and you can speak to the caller.
Operating when on the move (remote operation)
You can check your answering machine from any other telephone (hotel, pay phone
etc.).
Prerequisites:
You have set a system PIN other than 0000 ¢ page 15.
The phone you are using for remote operation has tone dialling (DTMF) i. e., you
hear different tones when you press the keys.
Calling the answering machine and playing messages
~ (Dial your own number.) ¤ When you hear your announcement, press 9 and
enter the system PIN.
The following keys are used for operation:
Activating the answering machine
~ (Enter your own number and allow the phone to ring until you hear the message:
"Please enter PIN")
¤ ~
(Enter system PIN)
Your answering machine is activated. It tells you how much memory time is left. The
messages are now played back. The answering machine cannot be deactivated
remotely.
Please note (Gigaset A220A)
When CallScreening via the handset is activated and the call can already be
heard
at the handset, you can only accept the call via MENU ¤ Accept ¤ OK.
Pressing the talk key/hands free key
c only activates or deactivates the hands-
free mode.
A
During the number/date/time announcement: Skip to the start of the previ-
ous message.
During the message playback: Skip to the start of the current message.
B
Stop playback. Press again to resume.
3
Go to the next message.
0
Delete current message.
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
9
Network mailbox
The network mailbox is the answering machine in your provider's telephone network.
More information is available from your provider. You cannot use the network mailbox
unless you have
requested it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list
(¢ page 6), the menu (¢ page 15) and to use fast access via key 1 (¢ page 1),
you will need to enter the number in your phone:
MENU ¤ u Answer Machine ¤ OK ¤ u Netw. Mailbox/Net Mailbox ¤ ~ (enter
number)
¤ OK
Locating a handset ("Paging")
You can locate your handset using the base.
¤ Briefly press the registration/paging key on the base (¢ page 1).
All handsets will ring at the same time (“paging”), even if the ringers are switched off.
Ending paging: Briefly press the registration/paging key on the base (¢ page 1) or
press the talk key b or the end call key a on the handset.
Registering handsets manually
You can register up to four handsets to your base station. Each additional handset
must be registered on the base station in order for it to work properly!
Registration takes approx. 1 minute. Handsets are assigned the lowest available inter-
nal number (1-4). If the internal numbers 1–4 are already assigned to other devices, the
number
4 will be overwritten.
1) On the handset
MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u Register HS ¤ Enter the
base system PIN (default setting: 0000)
¤ OK ¤ Registering is displayed.
2) On the base
Within 60 seconds, press and hold the registration/paging key on the base
(¢ page 1) for approx. 3 seconds.
De-registering handsets
You can de-register all other registered handsets from each of the registered Gigaset
handsets.
MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u De-register HS ¤ u Select
the internal party you wish to de-register. The handset you are currently using is
indicated by <.
¤ OK ¤ Enter the base system PIN (default setting: 0000) ¤ OK
Using multiple handsets
Making internal calls
Internal calls are free calls to other handsets that are registered to the same base sta-
tion.
2 handsets are registered
Press the display key INT, the other handset is called.
More than 2 handsets are registered
Calling a specific handset
INT ¤
~
(1...4, enter internal number of the handset) or
INT ¤
u
(Select the internal party) ¤ OK or b ¤ the handset is called
Calling all handsets (“group call”)
INT ¤ P or INT ¤ u Call all ¤ OK or b ¤ all handsets are called
When a participant answers you can speak to them. To end the call, press a.
Internal consultation call/connecting a call
You are in conversation with an external participant. Press the INT display key and call
one or all handsets. The external participant hears the hold music. When the internal
participant answers: If necessary, announce the external call.
Either press the end call key a (the call is transferred to the internal participant), or
press the display key . You are reconnected with the external participant.
When transferring a call you can also press the end call key a before the internal par-
ticipant answers.
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
10
Listening in to an external call
You are conducting an external call. An internal participant can listen in on this call and
take part in the conversation (conference).
Prerequisite: The Listening in function
must be activated.
Activating/deactivating listening in
MENU ¤ u Settings ¤ OK ¤ u Base ¤ OK ¤ u Listening in ¤ OK ( = on)
Internal listening in (conference)
You want to listen in to an existing external call. Press and hold the b key. You can
listen in to the call. All participants hear a signal tone.
To end: press the end call key a. All participants hear a signal tone.
If the first internal participant presses the end call key a, the handset that has “lis-
tened in” remains connected to the external participant.
Setting the alarm clock
Activating/deactivating the alarm clock
MENU ¤ u Alarm Clock ¤ OK ¤ Activation ¤ OK ( = on)
When activated: ¤ ~ (Set the wake-up time) ¤ OK
When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock
is set, the wake-up icon
l will appear on the screen and the wake-up time will be dis-
played instead of the date.
Setting the wake-up time
MENU ¤ u Alarm Clock ¤ OK ¤ u Wake-up time ¤ OK
Enter the wake-up time in hours and minutes, then press OK.
Phone settings
For details on how to make audio settings, see menu overview ¢ page 15.
For details on how to set the system PIN on the base station, see the menu overview
¢ page 15.
Changing the display language
MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u Language ¤ OK ¤ u
(select language) ¤ OK
The current language is indicated by .
If you accidentally choose a language you do not understand:
MENU ¤
521
(press the keys one after the other) ¤ u (select language)
¤ OK
Activating/deactivating music on hold
You can select that your external participant hears music in case of internal recall and
during call transfer.
MENU ¤
P#Q5#1M
¤ The number for the current setting flashes:
0 = off; 1 = on ¤ enter number ¤ OK.
Repeater mode
With a repeater you can increase the range of your base station. You will need to acti-
vate repeater mode (¢ page 15). Repeater mode and No Radiation mode
(¢ page 15) cancel each other out.
Resetting the handset
You can reset individual settings and changes that you have made. Entries in the direc-
tory, the calls list and the handset's registration to the base station will be retained.
MENU ¤ u Settings ¤ OK ¤ u Handset ¤ OK ¤ u Reset Handset ¤ OK
¤ Reset? ¤ OK
Cancel the reset with a.
Resetting the base station
When restoring factory settings the No Radiation mode is deactivated, individual set-
tings are reset and all lists are deleted.
The date and time are retained. The answering machine (A120A/A220A only) is ready
for use approx. 15 seconds after the base has been reset.
Resetting the base via the menu
Handsets are still registered, the system PIN is not reset.
MENU ¤ u Settings ¤ OK ¤ u Base ¤ OK ¤ u Base Reset ¤ OK ¤ Reset?
¤ OK
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
11
Resetting the base using the key on the base
All handsets are de-registered and the system PIN is reset to the original code 0000.
Carry out the following steps: Remove the mains cable from the base. Hold down the
registration/paging key on the base (¢ page 1) and reconnect the power cable to
the base at the same time. Hold the key down for at least 5 seconds.
Operating the base station on the PABX/router
Operating on the router
When operating the Gigaset on an analogue port of a router you can reduce problems
with
echoes by activating the Echo mode (¢ page 15). If you have no problems with
echoes, this function should be deactivated.
Operating on the PABX
The following settings are only necessary when your PABX requires them; see the user
guide for your PABX.
When entering the digits, enter them slowly one after the other.
Changing the dialling mode
MENU ¤
P#Q5#1N
¤ The number for the set dialling mode flashes:
0 = touch tone dialling (DTMF); 1 = dial pulsing (DP) ¤ enter number ¤ OK.
Setting recall
MENU ¤
P#Q5#1Q
¤ The number for the current recall flashes:
0
= 80 ms; 1 = 100 ms; 2 = 120 ms; 3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms;
7
= 800 ms ¤ enter number ¤ OK.
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key and
sending the phone number.
MENU ¤
P#Q5#1L
¤ The number for the current pause length
flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7
sec. ¤ enter number ¤ OK.
Changing the pause after the recall key
MENU ¤
P#Q5#12
¤ The number for the current pause length
flashes: 1 = 800 ms; 2 = 1600 ms; 3
= 3200 ms ¤ enter number ¤ OK.
b
Appendix
Entering letters/characters
Specifications
Batteries
Technology: Nickel-metal-hydride (NiMH); Size: AAA (Micro, HR03); Voltage: 1.2 V;
Capacity: 400 - 1000 mAh
General specifications
Standard
characters
Press the relevant key
the number of times
indicated.
Briefly press the hash
key
# to switch from
"Abc" to "123" mode,
from "123" to "abc"
mode and from "abc"
to "Abc" mode.
1) Space
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x
1
1£$¥¤
2
abc2äáàâãç
I
def 3ëéèê
4
gh i4ïíìî
5
jkl5
L
mno6öñóòôõ
M
pqr s7ß
N
tuv8üúùû
O
wxy z 9ÿýæøå
Q
.,?!0+-:¿¡";_
P
*/()<=>%
#
#@\ &§
1)
DECT standard is supported
GAP standard is supported
Range up to 300 m outdoors, up to 50 m indoors
Base station power supply 230 V ~/50 Hz
Environmental conditions
in
operation
+5 °C to +45 °C, 20% to 75% relative humidity
Base station power consumption A120/A220 A120A/A220A
In standby mode
– Handset in base station
– Handset outside base station
ca. 1.0 W ca. 1.2 W
ca. 0.8 W ca. 1.0 W
During a call ca. 1.0 W ca. 1.2 W
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
12
Questions and answers
If you have any queries about the use of your telephone, visit our website at
www.gigaset.com/service
for 24-hour support. The table below contains a list of common problems and possible
solutions.
Contact with liquid
If the handset has come into contact with liquid:
1 Switch off the handset and remove the battery pack immediately.
2 Allow the liquid to drain from the handset.
3 Pat all parts dry, then place the handset with the battery compartment open and
the keypad facing down in a dry, warm place for at least 72
hours (not in a micro-
wave, oven etc.).
4 Do not switch on the handset again until it is completely dry.
When it has fully dried out, you will normally be able to use it again.
Problem Cause Solution
Nothing
appears in
the
display.
The handset is not switched
on.
The batteries are flat.
Press the end call key a for approx.
5
seconds or place the handset in
the base station.
Charge or replace the batteries.
No wireless
connection
to
the base
station,
Base
flashes in
the display.
The handset is outside the
range of the base station.
The handset is not regis-
tered.
The base station is not
turned on.
Move the handset closer to the base
station.
Register the handset ¢ page 9.
Check the mains connector on the
base station
¢ page 3.
You cannot
hear a ringer/
dialling tone
from the fixed
line network.
The phone cord supplied
has not been used or has
been replaced by a new cord
with the wrong jack connec
-
tions.
Please always use the phone cord
supplied or ensure that the
pin
connections are correct when
purchasing from a retailer: 3-4
assignment of telephone leads/
EURO
CTR37.
Error tone
sounds after
system PIN
prompt.
PIN forgotten.
The system PIN you have
entered is incorrect.
Reset the system PIN to the default
0000
¢ page 10.
All handsets are de-registered. All
settings are reset. All lists are
deleted.
!
Service (Customer Care)
Step by step towards your solution with Gigaset Customer Care
www.gigaset.com/service
Visit our Customer Care pages:
www.gigaset.com/service
Here you will find:
Frequently asked questions
Free software and user manual downloads
Compatibility checks
Contact our Customer Care staff:
Couldn't find a solution in the FAQs section?
We are happy to help...
... by eMail: www.gigaset.com/contact
... by telephone:
United Kingdom
www.gigaset.com/uk/service
Service Hotline: 020 36953111 (local call cost charge)
Ireland
www.gigaset.com/ie/service
Service Hotline: 0818 200 033 (6.6561 Ct./Call)
Please have your proof of purchase ready when calling.
Please note that if the Gigaset product is not sold by authorised dealers in
the national territory the product may not be fully compatible with the
national telephone network. It is clearly specified on the box near the CE
mark for which country/countries the equipment has been developed. If
the equipment is used in a manner inconsistent with this advice or with
the instructions of the manual and on the product itself, this may have implications on
the conditions for warranty or guarantee claims (repair or exchange of product).
In order to make use of the warranty, the product purchaser is asked to submit a
receipt which proves the date of purchase (date from which the warranty period
starts) and the type of goods that have been purchased.
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
14
The purchase receipt, together with the date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims under the Guarantee must be submitted
within two months of the Guarantee default becoming evident.
Ownership of devices or components replaced by and returned to Gigaset Com-
munications shall vest in Gigaset Communications.
This Guarantee shall apply to new devices purchased in the European Union. For
Products sold in the Republic of Ireland the Guarantee is issued by
Gigaset Com-
munications UK Limited, Quatro House, Lyon Way, Camberley, Surrey, GU16 7ER.
Any other claims resulting out of or in connection with the device shall be
excluded from this Guarantee. Nothing in this Guarantee shall attempt to limit or
exclude a Customers Statutory Rights, nor the manufacturers liability for death or
personal injury resulting from its negligence.
The duration of the Guarantee shall not be extended by services rendered under
the terms of the Guarantee.
Insofar as no Guarantee default exists, Gigaset Communications reserves the right
to charge the customer for replacement or repair.
The above provisions does not imply a change in the burden of proof to the detri-
ment of the customer.
To invoke this Guarantee, please contact the Gigaset Communications helpdesk on
1850 777 277. This number is also to be found in the accompanying user guide.
Environment
Our environmental mission statement
We, Gigaset Communications GmbH, bear social responsibility and are actively com-
mitted to a better world. Our ideas, technologies and actions serve people, society and
the environment. The aim of our global activity is to secure sustainable life resources
for humanity. We are committed to a responsibility for our products that comprises
their entire life cycle. The environmental impact of products, including their manufac
-
ture, procurement, distribution, utilisation, service and disposal, are already evaluated
during product and process design.
Further information on environmentally friendly products and processes is available
on the Internet at
www.gigaset.com.
Environmental management system
Gigaset Communications GmbH is certified pursuant to the international
standards ISO 14001 and ISO 9001.
ISO 14001 (Environment): Certified since September 2007 by TüV SÜD
Management Service GmbH.
ISO 9001 (Quality): Certified since 17/02/1994 by TüV SÜD Management Service
GmbH.
Disposal
Batteries should not be disposed of in general household waste. Observe the local
waste disposal regulations, details of which can be obtained from your local authority.
All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the govern
-
ment or the local authorities.
This crossed-out wheeled bin symbol on the product means the product
is covered by the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will
help prevent potential negative consequences for the environment and
human health. It is a precondition for reuse and recycling of used electrical and elec
-
tronic equipment.
For more detailed information about disposal of your old appliance, please contact
your local council refuse centre or the original supplier of the product.
Lombok / Großbritannien - Irland / A31008-M2401-L101-2-7619 / Lombok.fm / 11.08.2014
Version 4, 16.09.2005
16
Frequently asked questions
Q: There is no dial tone.
A: Press call button for 2 seconds (long press) to obtain dial tone.
A short press opens the redial list.
Q: The line is crackling / not clear.
A: Have you used the new line cable provided? Please do not use an old cable.
Q: The display is not clear / seems to be broken.
A: The display is protected by a plastic film, please make sure you have removed
the
protective film.
Q: The handset is not registered.
A: If your handset is not registered, please follow the Registration handset procedure
(¢ page 9).
Q: The caller ID is not working.
A: Have you subscribed to this service (CLIP) from your provider?
Please check:
Have you used the phone cord supplied
Have you fully inserted the power cable into the base station
Have you inserted the batteries correctly
Have you charged the batteries for 6.5 hours
Have you set up the Date/Time
To download the latest manuals, visit our web-site: http://www.gigaset.com
You have questions? As a Gigaset customer, you can take advantage of our
comprehensive service offerings. You can find help quickly in this User Manual
and in the service pages of our Gigaset online portal:
http://www.gigaset.com
Product may not be fully compatible with the national telephone network.
It is clearly specified on the box near the CE mark for which country/countries the
equipment has been developed. If the equipment is used in a manner inconsistent
with this advice or with the instructions of the manual and on the product itself, this
may have implications on the conditions for warranty or guarantee claims (repair or
exchange of product).
In order to make use of the warranty, the product purchaser is asked to submit a
receipt which proves the date of purchase (date from which the warranty period
starts) and the type of goods that have been purchased.
If you have problems setting up or operation this product please call
GIGASET UK HELPLINE 020 369 53111
GIGASET IRL HELPLINE +353 818 200 033
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Siemens-gigaset-a120
6
  • Ik wil graag een telefoonnummer op mijn huistelefoon blokkeren!
    Heb gekeken op google maar het lukt me niet!
    Mijn nummer is 0575-843970
    Mvg,
    S. Maas. Gesteld op 16-4-2022 om 15:08

    Reageer op deze vraag Misbruik melden
  • links onder display staat 0 met kruiserdoorheen en spaeker als ik daar opdruk staat er muting maar ik kan niet bellen Gesteld op 20-1-2022 om 14:56

    Reageer op deze vraag Misbruik melden
  • linksonder display 0 met daardoorheen een x daarnaast een ) of beeld van speaker telefoon doet het niet Gesteld op 20-1-2022 om 11:48

    Reageer op deze vraag Misbruik melden
  • hoe kom ik bij tekens voor het versturen van een bericht ? bijvoorbeeld vraagteken punt Gesteld op 2-1-2022 om 13:36

    Reageer op deze vraag Misbruik melden
  • 1 van mijn handsets geeft het symbool niet bellen, een doorstreepte klok.Hoe kan ik dit ongedaan maken? Bedankt. Mijn 2 andere handsets bellen, de derde niet. Gesteld op 17-11-2021 om 17:36

    Reageer op deze vraag Misbruik melden
  • Als ik mijn mobiel bel dan komt het gesprek niet aan. Was altijd wel. Gesteld op 26-7-2021 om 12:10

    Reageer op deze vraag Misbruik melden
12
  • hoe kan ik de funktie "bericht inspreken"uitschakelen ? Gesteld op 25-7-2021 om 12:48

    Reageer op deze vraag Misbruik melden
  • ik wil het aantal belsignalen op de telefoon van mijn Siemens gigaset 120 verlengen Gesteld op 10-5-2021 om 17:26

    Reageer op deze vraag Misbruik melden
  • Wij worden 2x per dag gebeld door een nummer wat wij willen blokkeren. Hoe kunnen wij de blokkade instellen
    Gesteld op 1-3-2021 om 11:05

    Reageer op deze vraag Misbruik melden
  • Sinds kort worden de namen uit mijn contacten niet weergegeven. Ik krijg dan de melding "externe oproep ". De provider heeft alles gecontroleerd, alles staat goed. Ook na contact met een van uw medewerkers is het niet gelukt. Ik heb een gigaset a120 (duo). Ik hoop dat u mij kunt helpen.
    Met vriendelijke groet
    Pim Zoet
    0637598632 Gesteld op 31-1-2021 om 11:33

    Reageer op deze vraag Misbruik melden
  • wanneer iemand van buitenaf mij belt, dan krijgt diegene direct de voicemail Gesteld op 10-1-2021 om 14:08

    Reageer op deze vraag Misbruik melden
  • Hoe weet je wanneer de batterij van het toestel volledig is opgeladen? Gesteld op 3-10-2020 om 11:22

    Reageer op deze vraag Misbruik melden
18
24
  • Ik heb de handset en basis volgens boekje aangesloten, de display werkt, ik kan een telefoonnummer ingeven maar krijg geen aansluiting, ook als ik naar de handset bel lukt het niet Gesteld op 22-6-2017 om 10:59

    Reageer op deze vraag Misbruik melden
  • Hoe een nieuw nummer bijvoegen en een oud nummer verwijderen Gesteld op 11-6-2017 om 14:11

    Reageer op deze vraag Misbruik melden
  • De Siemens Gigaset triple moet 6 uur opladen en daarna ontladen. Nergens staat hoe dat moet en hoelang dat duurt. Wilt u mij berichten hoe ik dat ontladen moet doen en hoelang het duurt voor de telefoon ontladen is?


    Gesteld op 9-9-2016 om 22:39

    Reageer op deze vraag Misbruik melden
    • De Gigaset moet 6,5 uur opgeladen worden, daarna gewoon van de houder totdat hij leeg is.
      Dan weer opladen.
      Dit moet gebeuren, zodat hij daarna de juiste lading van de batterij aangeeft. Geantwoord op 21-9-2016 om 00:00

      Waardeer dit antwoord (7) Misbruik melden
  • HOe open ik het toestel om de batterijen te vervangen? Gesteld op 22-5-2016 om 08:47

    Reageer op deze vraag Misbruik melden
    • Ik weet dat het niet makkelijk gaat, maar het is gewoon het onderste smalle gedeelte schuiven. ( het gedeelte waar geen letters staan, onder het rondje) op de achterkant. Geantwoord op 22-5-2016 om 10:15

      Waardeer dit antwoord (6) Misbruik melden
  • hoe kan ik mijn berichten lezen als er nieuwe berichten zijn Gesteld op 28-3-2016 om 02:48

    Reageer op deze vraag Misbruik melden
  • hoe kan ik de ringtone hoger zetten dan 5 bijna niet te horen Gesteld op 28-1-2016 om 22:22

    Reageer op deze vraag Misbruik melden
    • Hallo, ik heb eveneens de gigaset A120 aangeschaft en loop tegen hetzelfde probleem aan. Ringtones zijn blijkbaar alleen 'oplopend' hoorbaar. Beter gezegd, niet hoorbaar. Ook niet op hoogste stand (5). Hogere stand dan 5 is niet mogelijk. Op moment dat er een beetje omgevings-geluid is, zoals radio op achtergrond, hoor je telefoon niet/nauwelijks.
      Daarnaast geen duidelijk waarneembare ringtone te selecteren, zoals de 'ouderwetse' beltoon... gewoon 'tring... tring'.
      Ik vrees dat er niets anders opzit dan telefoon om te ruilen voor een uitgebreider model. Gelukkig heb ik hem pas gisteren aangeschaft ;-). Geantwoord op 5-3-2016 om 14:49

      Waardeer dit antwoord (1) Misbruik melden
30
36
42
48
54
60
  • In de handleiding van de Siemens Gigaset A120 staat niet hoe de telefoon op handsfree kan worden ingesteld. Ik heb al een aantal keer getracht, als iemand mij belt, om te dubbelklikken op de verbindingstoets (bij mijn vorige telefoon werkte dit perfect), maar op dit toestel lukt het mij niet. Gesteld op 24-5-2011 om 07:29

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens gigaset a120 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens gigaset a120 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Siemens gigaset a120

Siemens gigaset a120 Gebruiksaanwijzing - Nederlands - 11 pagina's

Siemens gigaset a120 Gebruiksaanwijzing - Deutsch - 17 pagina's

Siemens gigaset a120 Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info