134
Configuring phone settings via the Web configurator
Gigaset DE900 IP PRO / en / A31008-M2210-R101-3x-7619 / web_configurator.fm / 22.03.2011
Version 2, 27.05.2010
Activating/deactivating connections
Only activated connections can be used for Internet telephony.
¤ To use a configured connection, select Active.
Specifying a default line for outgoing calls
¤ Select Default Send Account for the connection that you want to use as the default
line for your phone calls. Only one can be selected.
Establishing new connections or editing existing ones
¤ Click on Edit in the row of a configured connection to change its configuration.
¤ Click on Edit in a row without a configured connection to establish a new connection.
Only one connection can be configured at a time for mobile phones.
Configuring the connections
To do this you need the relevant information about your provider for Internet telephony.
¤ In the Connection Name or Number field enter a name of your choice or the phone
number for this connection.
¤ Click on Start Profile Download to load a provider profile.
An assistant opens to guide you through the next steps.
¤ Select your Country and in the next step your Provider.
¤ If your provider is not in the list, select Other Provider.
¤ Click on Finish.
The selected provider profile is loaded.
Entering personal provider data
Now enter your personal login data that you received from your VoIP provider.
¤ Enter the following data:
– Authentication Name
– Authentication Password
–Username
–Display Name
Advanced settings
You can find further parameters for configuring your VoIP connection under Advanced
Settings.
¤ Click on Show next to Advanced Settings.
You will find detailed information on configuring a VoIP account in the section entitled
Configuring a VoIP account on Page 107.
Counting missed and accepted calls
Missed and accepted calls for this VoIP account are recorded in the call lists for the phone
if this function is activated (
£ Page 42).
¤ Open the Advanced Settings area.
¤ Select Ye s for Missed/accepted calls count if you want to deactivate this function. The
default setting is No.
