7
Overview of programmes aRefer to the table of consumption values on page 8, and advice and warnings on page 6.
Programmes °C max.
T
Additional functions; Infor
algodón/algodão (Cottons)
: - 90 °C
8 kg/
4 kg*
hard-wearing fabrics, cottons or linen that can be
washed at 90°C
speedPerfect i *, ecoPerfect ¢ , menos â , extra h
+ prelav
antialergias (Sensitive) : - 60 °C colour fast cottons or linen
speedPerfect i *, ecoPerfect
¢, menos â, extra h ;
for particularly sensitive skin; longer wash programme at selected
temperature, higher water level, additional rinse cycle
sintéticos (Easy-Care)
: - 60 °C
3.5 kg
easy-care cotton, linen, synthetic or blended fabrics
speedPerfect i , ecoPerfect
¢, menos â, extra h
+ prelav
mix : - 40 °C cotton or synthetic fabrics
speedPerfect i , ecoPerfect
¢, menos â, extra h ;
different types of laundry can be washed together
prendas oscuras/roupa
escura (Dark Laundry)
: - 40 °C dark cotton and dark synthetic fabrics
speedPerfect i , ecoPerfect
¢, menos â, extra h ;
reduced rinse and final spin cycle
camisas/business
(Shirts/Business)
: - 60 °C
2 kg
non-iron shirts made of cotton, linen, synthetic fibres
or blended fabrics
speedPerfect i , ecoPerfect
¢, menos â, extra h ;
menos â : spin only, hang up dripping wet
delicado/seda
(Delicate/Silk)
: - 40 °C
for delicate fabrics, e.g., silk, satin, synthetic fibres or
blended fabrics (e.g. curtains)
speedPerfect i , ecoPerfect
¢, menos â, extra h :
no spin between rinse cycles
ÿ lana/lã (Wool) : - 40 °C hand/machine washable wool
particularly
longer programme breaks (fabrics rest in the detergent solution)
express 15 min. : - 40 °C
synthetic cotton, linen, synthetic fibres or blended
fabrics
short programme of approx. 15 minutes,
suitable for lightly soiled laundry
microfibras + impreg.
(Outdoor+Impregnation)
: - 40 °C
1 kg
washing
sportswear and outdoor clothing, and clothing with a
weatherproof membrane, waterproof fabrics
speedPerfect i , ecoPerfect
¢, extra h;
more information about the textile guard function apage 6 ,
reduced final spin at intervals
lencería/lingerie (Lingery) : - 40 °C lingery
speedPerfect i , ecoPerfect
¢, menos â, extra h
Additional programmes mü (Rinse)/ centrifug. adicional c (Spin), lü (Empty)
* reduced load with additional function speedPerfect i .
For programmes without prewash, add detergent to compartment II . For prewash programmes, distribute the detergent between compartments I and II .
9309 / 9000743694
9000743694
WM14Q468EE /...
Siemens Electrogeräte GmbH
Carlä Wery Str. 34
81739 Munich / Germany
8
Safety instructions
– Carefully read the instruction manual and the information enclosed, and act accordingly.
– Keep the machine's documentation for future reference.
Risk of electric shock! – Never pull the cable to disconnect the mains plug!
– Never insert/disconnect the mains plug with damp hands.
Danger to life! For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation! – Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning! – Keep detergents and care products out of the reach of children.
Risk of explosion! – Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover/cleaning solvent may lead to an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury! – The washing machine door may become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
– Be careful when opening the detergent drawer while the machine is in operation.
Consumption values depending on model
Programme Load Electricity*** Water***
Programme
duration
***
algodón/algodão 20 °C 8 0.37 kWh 68 l 2 ½ h
algodón/algodão 30 °C 8 0.40 kWh 68 l 2 ½ h
algodón/algodão 40 °C* 8 1.05 kWh 68 l 2B h
algodón/algodão 60 °C 8 kg 1.15 kWh 68 l 2B h
algodón/algodão 90 °C 8 kg 2.30 kWh 80 l 2B h
sintéticos 40 °C* 3.5 kg 0.64 kWh 55 l 1 B h
mix 40 °C 3.5 kg 0.54 kWh 47 l 1 h
delicado/seda 30 °C 2 kg 0.19 kWh 34 l B h
lana/lã 30 °C 2 kg 0.17 kWh 39 l B h
* Pro
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme
Additional
function
Load
Annual energy
consumption
Annual water
consumption
algodón/algodão 40/60 °C
ecoPerfect
¢**
8/4 kg 179 kWh 8700 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
9
Care and cleaning
Before the first was
Do not put laundry in the machine! Turn on the tap. Put into compartment II:
– approx. 2 litres of water
– detergent (measure according to the manufacturer's instructions for lightly soiled laun
Turn the programme selector to sintéticos (Easy-Care) 60 °C and press
(Start/ Reload). At the end of the programme,
turn the programme selector to o
(Off)
Machine housing, control panel
– Remove detergent and cleaning agent residue.
– Wipe with a soft, damp cloth.
– Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1.
Pull out, press insert down and remove drawer completely.
2. To remove the insert: press upwards from below with your finger.
3. For models with insert for liquid detergent:Slide the insert upwards and remove it from the back.
4. Clean the detergent dispenser tray and inserts with water and a brush and dry them.
5. Attach the insert and engage (connect the cylinder to the guide pin).
6. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
For rust stains, use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine!
This will not be necessary if the correct dosage of detergent is used. If it is, descale the appliance according to the
manufacturer's instructions. aInstallation
instructions.
Emergency release (e.g. in the event of a power cut)
The programme continues to run when the power has been restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding!
The detergent solution and laundry may be hot. Let it cool.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1.
Turn the programme selector to o (Off) and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
The washing machine door can then be opened.
Information on the display panel depending on model
r flashes Close the washing machine door properly; laundry may be caught.
§: ³Å,
§: É
Turn on the (cold water) tap fully, supply hose kinked or trapped;
Clean the filter apage 10 , water pressure too low.
§: ³µ – Detergent solution pump blocked; Clean the detergent solution pump apage 10.
– Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon apage 10 .
– Heavy foam build-up apage 11 , status indicator 1 flashes.
§: ´ W
©: ³¯ – Open the (hot water) tap fully.
– Inlet hose kinked/trapped.
– Water pressure too low. Clean the filter apage 10 .
– Hot water
wash cycle.
s Ca page 5 .
– Risk of electric shock! Disconnect the mains plug.
– Risk of explosion! Do not use solvents.
9
1
Maintenance
Detergent solution pump
Turn the programme selector to o (Off) and disconnect
the mains plug.
1. Using a screwdriver or the insert for liquid detergent
(depending on model), open and remove the service flap.
2. Remove the folding gutter and place a large enough container underneath.
3. For models
from the housing.
Remove the
the sealing cap and place the drainage hose in the retainer.
3* For Carefully
detergent solution begins to flow out on the folding gutter. When the container is full, close
the pump cover and empty the container. Repeat the above steps until all the detergent
solution has completely drained out.
4. Carefully unscrew the pump cover (there may be residual water).
5. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
6. Replace the pump cover and screw it tightly.
7. Return the drainage
8. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 2 litres of water into compartment II and then start the lü(Empty) programme.
Drainage hose at the siphon
Turn the programme selector to o (Off) and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water suppl
Risk of electric shock!
Do not immerse the Aqua-Stop safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except
mü(Rinse)/c centrifug. adicional c (Spin) // l (Empty)).
3. Choose (Start/ Reload). Let the programme run for appr
4. Turn the programme selector to
o (Off). Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance.
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
– Risk of burning!
Allow the detergent solution to cool.
– Turn off the tap.
1
What to do if...
ʑ
Water is leaking out – A
– Tighten the screw connection of the supply hose.
ʑ
No water supply.
Detergent not dispensed.
– (Start/Reload ) not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apage 10.
– Supply hose kinked or trapped?
ʑ
The appliance door will not
open.
– Safety function active. Programme stopped? apage 4.
– (without final spin) selected? apage 3, 4.
– Can be opened by emergency release only? apage 9.
– Door locked after the washing machine is switched off: Switch on the washing
machine and wait for 5 seconds.
ʑ
The selected programme does
not start.
– (Start/Reload )
or (Ready in) time selected?
– Washing machine door closed?
– Childproof lock active? Deactivate apage 5.
ʑ
Detergent solution is not
drained.
– (without final spin) selected? apage 3, 4.
– Clean the detergent solution pump apage 10.
– Clean the waste pipe and/or drainage hose.
ʑ
No water can be seen in the
drum.
– Not a fault. Water remains inside below the visible area.
ʑ
Spin result not satisfactory.
Laundry wet/too damp.
– Not a
laundry.
Distribute large and small items of laundry evenly in the drum.
– menos â (Reduced Ironing) selected? apage 5.
– Selected speed too low? apage 5.
ʑ
Programme duration changes
suddenly during operation.
– Not
it therefore being possible for the display panel to show adjustments in the
duration.
ʑ
Spin cycle performed several
times.
– Not a fault. The balance control system has detected an imbalance and is
attempting to redress this by repeating the spin.
ʑ
Residual water in the
compartment for care products.
– Not a fault: the action of the care product is not affected.
– Clean the compartment if necessary apage 9.
ʑ
Odour formation in the washing
machine.
– Run programme algodón/algodão (Cottons) 90 °C without laundry. Use
standard detergent.
ʑ
Status display 1 flashing.
Appliance has detected a
detergent overload.
– Too much detergent used?
If
with ½ litre of water and pour into compartment II (not with outdoor or down
fabrics).
– Reduce the detergent dosage for the next wash cycle.
ʑ
Intense noise formation,
vibrations and "wandering"
during the spin cycle.
– Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions .
– Transportation safety devices removed?
Remove transportation safety devices aInstallation instructions .
ʑ
Display panel/indicator lamps
remain turned off while the
machine is working.
– Energy-saving mode apage 5.
– Power cut?
– Fuses triggered? Reset/change the fuse.
– If the fault occurs repeatedly, call customer services.
ʑ
Programme sequence longer
than usual.
– Not a fault. Unbalanced load detection system adjusts imbalance by repeatedly
distributing the laundry.
– Not a fault: foam detection system active; adds an additional rinse cycle.
ʑ
Detergent residues on the
laundry.
– Occasionally, phosphate-free detergents contain water-insoluble residues.
– Select
mü(Rinse)/c centrifug. c (Spin)
washing.
If you cannot correct a fault yourself or if a repair is necessary:
– Turn the programme selector to
o (Off) and remove the mains plug from the socket.
– Turn off the water supply and call customer services aInstallation instructions.
Instructions for use
Washing
Machine
Observe the safety
instructions on
page 8!
Read these instructions and the separate installation
instructions before operating the washing machine.
en
