650661

Siemens WD14H421EU Handleiding

2
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
8
Drying table
Cottons/Coloureds (textiles made of cotton or linen such as underwear, T-shirts, sweaters, trousers, kitchen towels)
Dry weight in kg
0,5ɛ1,0 1,0ɛ2,0 2,0ɛ3,0 3,0ɛ4,0 ɛ0,5 ɛ1,0 ɛ2,0 ɛ2,5
Estimated drying time in minutes Selectable drying time in minutes
Cupboard dry
< 60 60ɛ80 80ɛ110 110ɛ150
30 60 90 120
< 65 65ɛ90 90ɛ130 130ɛ160
Recommended programme
Intensive Dry (auto) Intensive Dry (time)
Quilt/Terry towel (big or thick textiles made of cotton such as terry towels, bed sheets, table cloths, jeans, workwear)
Dry weight in kg 0,5ɛ1,0 1,0ɛ2,0 2,0ɛ3,0 3,0ɛ4,0 ɛ0,5 ɛ1,0 ɛ1,5 ɛ2,0
Estimated drying time in minutes Selectable drying time in minutes
Cupboard dry
< 60 60ɛ90 90ɛ120 120ɛ160
30 60 90 120
< 80 80ɛ110 110ɛ140 140ɛ170
Recommended programme
Intensive Dryc(auto) Intensive Dry (time)
Easy-Care (textiles made of synthetic or mixed fibres such as shirts, sportswear, delicate garments)
Dry weight in kg
0,5ɛ1,0 1,0ɛ2,0 2,0ɛ2,5 ɛ0,5 ɛ1,0 ɛ1,5 ɛ2,0
Estimated drying time in minutes Selectable drying time in minutes
Cupboard dry
< 50 50ɛ100 100ɛ120
30 60 90 120
< 60 60ɛ110 110ɛ130
Recommended programme
Low Heat Dry (auto) Low Heat Dry (time)
Times are approximate and refer to standard load, spin programme and environment temperature.
The maximum selectable drying time (time dry) is 120 minutes, if the load of the laundry to be dried is more than 2.5 kg, please select
auto dry function. Auto dry is recommended to achieve good drying result and save energy. 15 minutes time dry programme is for
cooling down the laundry.
Consumption values
Programme Option Load
Electricity
consumption
***
Water ***
Programme
duration
***
Cottons 30 °Câ**
Intensive
7 kg 0,49 kWh 74 l 2:18 h
Cottons 40 °Câ**
Intensive
7 kg 0,57 kWh 74 l 2:18 h
Cottons Eco 60 °C **
Intensive
7 kg 1,19 kWh 51 l 2:31 h
Cottons 90 °C – 7 kg 2,10 kWh 84 l 2:15 h
Easy-Care 40 °Câ** Intensive
3,5 kg 0,59 kWh 55 l 1:43 h
Mix 40 °Câ** – 3,5 kg 0,54 kWh 52 l 1:03 h
Delicate/Silk 30 °C
– 2 kg 0,15 kWh 29 l 0:39 h
d Wool : (cold) – 2 kg 0,08 kWh 42 l 0:36 h
d Wool 30 °C – 2 kg 0,16 kWh 42 l 0:36 h
Intensive Dry – 4 kg 2,55 kWh 3 l 2:30 h
Low Heat Dry
– 2,5 kg 1,55 kWh 3 l 2:00 h
Fluff Clean : (cold) – – 0,04 kWh 29 l 0:16 h
Cottons Eco 60 °C +
Intensive Dryc(2 cycles)*
Intensive*
7/3,5 kg 5,67 kWh 57 l 6:58 h
* Programme setting for testing and energy labelling in accordance with EN50229, EU directive 96/60/EC.
** Programme setting for testing according to valid version of EN60456.
Note for comparative testing: to test using the test programmes, wash using the specified load amount and maximum spin speed.
Select the Mix 40 °C programme and maximum spin speed as the short programme for coloureds.
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambiente temperature,
type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional functions.
9
Display and Option buttons
ʑ
Display symbols
ʑ
Display information
Alternating display of drying
status (Auto dry mode/Time dry
duration/OFF)â**, maximum load
recommendation in kg and
remain time or finish in time
display.
* âExample of display, may vary
depending on selections.
**Only when the drying
programme is available.
ʑ
Option buttons
You can change the spin speed and temperature even while the selected programme is running.
The effects depend on the progress of the programme.
°C Temp.
You can change the indicated washing temperature. The maximum washing temperature which
can be selected depends on the programme that has been chosen. aPage 7
Spin
You can change the indicated spin speed. The maximum spin speed which can be selected
depends on the chosen programme. If is selected, the load is held in the rinsing water.
9 Dry
You can activate, deactivate and set the drying function by touching this option button. Mode
ofâwashing and drying without interruption is auto dry only; when single drying programme is
selected, you can choose auto dry, or time dry with desired drying time. aPage 8
Delay
When you select a programme, the respective programme duration is displayed. You can delay
the start of the programme before it begins. The finish-in time indicates when the programme will
be finished. It can be set in hour increments up to a maximum of 24 h.
Press and hold the
Delay button until the required number of hours is shown (h=hour).
Select Start/Reload, the door is locked.
Prewash: On if prewash process is running.
t Washing: On if wash process is running.
mcRinse: On if rinse process is running.
Spin: On if spin process is active.
9cDrying: On if drying process is active.
: On if drying programme is selected.
xTap is: Flashing if tap not open or no water supply.
On if low water pressure.
This will extend the programme.
küOverdosage: Foam detected. Maybe too much detergent.
rcDoor:On if door can be opened.
sChildproof lock: On if childproof lock is activated.
Flashing if there is misoperation.
Activate/deactivate childproof lock. aPage 10
kg, *:maximum load recommendation in kg for selected
washing/drying programme. aPage 7, Programme overview
Time, e.g. *: programme remaining time, or
*:Finish in time defined by user. aPage 9
Dry, drying mode and drying time:
: Auto dry mode 1.
: Auto dry mode 2, extra dry for drying programme.
: Drying programme is off.
*: Time dry for solo drying programme, drying time defined
manually. aPage 9,
9cDry button
: On if programme is in pause.
:On if door can be opened when programme was paused.
: End of programme, or
:End of programme with the
setting.
*:
Set volume of signals. aPage 10
Set additional rinse cycles. aPage 10
*:
Information on the display. aPage 11
10
ʑ
Additional functions
See also Programme overview aPage 7
Select the desired additional functions with the Option button and then activate (or deactivate)
the chosen function with the Select button, e.g. select the Intensive function:
– For Cottons Eco programme, touch Option button, â Less Iron indicator flashes.
– Touch Option button again until Intensive indicator flashes.
– Touch Select button. Intensive indicator flashes and related indicator comes on. It means
the function has been preselected. If you need to deselect the function immediately, touch the
Select button again.
– If no other action, the Intensive indicator stops flashing and comes on after several seconds.
Additional function is selected successfully. Setting of h Rinse Plus. aPage 10
üi Quick
Shorten the washing time. For slightly soiled items.
â Less Iron
Special spin sequence with subsequent fluffing. Gentle final
spin – residual moisture in the laundry increased slightly.
v Water Plus
High water level to achieve better rinse result.
h Rinse Plus
Additional rinse cycles, extended washing time. For areas with
very soft water or for further improvement of the rinsing result.
Select h Rinse Plus by Option button. Then touch Select
toâactivate the function and touch Select button for desired
rinse cycles (max. 3 cycles).
Intensive
Extends the washing time for a more intensive washing
ofâheavily soiled items.
Prewash
For heavily soiled laundry. Prewash at max. 30â°C.
ʑ
Start/Reload
For starting or pausing the washing/drying programme.
ʑ
Signal volume (for button signal and information signal)
ʑ
Childproof lock s Programme will not be changed by accidental operation.
To activate the childproof lock:
– After the programme starts or finish in time is activated a Page 9, press and hold the
Dealy button for 5 seconds;
– Release when the s symbol lights up. If button signal is on, an acoustic signal will be heard.
When the programme ends, the Start/Reload indicator remains on to remind you to deactivate
the childproof lock.
To deactivate the childproof lock:
– Touch the Dealy button until the s symbol turns off.
– Release the button.
s symbol flashes if the programme has been changed while childproof lock is activated.
If the childproof lock is deactivated while the programme selector is in a different position
from when the childproof lock was activated, the running programme will be halted.
Set to Off
for at least
5 seconds
1 step
clockwise
Touch
°
C Temp.
button and hold
1 step
clockwise
Button signals Information signals
Touch Dealy
button and set
volume
*
1 step
clockwise
Set to Off
direct
*If required, set repeatedly.
1. Activate setting
mode for signal
volume
2. Set volume for ...
Release the
°
C Temp.
button.
+
Touch Dealy
button and set
volume
*
Additional functions and Individual settings
11
Please close the door immediately because of rising water level.
In pause status and are displayed alternately.
Door is locked due to safety reasons (water level and/or temperature are too high).
For washing programme: In pause status, and are displayed alternately.
If you need to open the door, wait for the temperature to drop or drain the water (e.g.
select müRinse/Spin or l Empty programme).
For drying programme: If you need to open the door, wait for the temperature to drop
or set 15 minutes time dry programme to cool down the laundry.
If comes up after the drying programme ends frequently:
– Clean the cool air inlet filter.
a
Installation and maintenance instructions, Page 9
– Run the Fluff Clean :(cold) programme without laundry.
Door cannot be locked/unlocked due to high temperature of the door lock. Keep the
machine switched on for about 1 minute. Then the machine can beâlocked/unlocked
again.
Door cannot be opened due to the high temperature after the drying programme.
The cooling down process will continue until this display disappears and the door can
be opened.
x
Flashing (no water supply):
Tap turned on?
Inlet filter blocked? Clean filter aInstallation
and maintenance instructions, Page 8
Supply hose kinked or blocked?
On (low water pressure):
Only information. No influence on the
programme process. The programme
duration will be prolonged.
Clean drain pump a
Installation and maintenance instructions, Page 8;
outlet pipe/drainage hose blocked.
Hold the 9 Dry button for 3 seconds to clear this display.
– Clean the cool air inlet filter. aInstallation and maintenance instructions, Page 9
– Run the Fluff Cleanü:(cold) programme without laundry.
other displays
Switch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call the customer service.
Safety instructions
– Read and follow the operating and Installation and maintenance instructions and all other information
enclosed with the washer dryer.
– Retain documents for subsequent use.
Risk of electric shock
– Never pull out the mains plug by tugging the power cord.
– Never insert/pull out the mains plug with damp hands.
Risk of death
For worn-out appliances:
– Pull out the mains plug.
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washer dryer door. This will prevent children from
locking themselves in and risking their lives.
Risk of suffocation
– Keep packaging, plastic film and packaging parts out of the reach
ofâchildren.
Risk of poisioning
– Keep detergents and care products out of the reach of children.
Risk of explosion
– Items of laundry pretreated with cleaning agents containing solvents, e.g.
stain remover/cleaning solvents may lead to an explosion after being loaded
into the washer dryer.
First rinse items of laundry thoroughly by hand.
Risk of injury
– Washer dryer door may become very hot.
– Take care when draining hot detergent solution.
– Do not climb onto the washer dryer.
– Do not lean on the open washer dryer door.
– Do not touch the drum in case it is still spinning.
– Ensure that the pump cap is screwed on while the machine is running to
prevent the escape of water and contact with moving pump parts.
– If a drying programme was interrupted, the washer dryer and the laundry
may be very hot, select Intensive Drycor Low Heat Dry and set 15 minutes
programme to cool down the laundry, then remove the laundry.
Information on the display
12
What to do if ...
ʑ
Water is leaking out.
– Fit/refit drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑ
No water supply.
Detergent not dispensed.
– Start/reload not selected?
– Tap not turned on?
– Filter blocked? Clean the filter. aInstallation and maintenance
instructions, Page 8
– Supply hose kinked or trapped?
ʑ
Washer dryer door cannot be
opened.
– Safety function active. Programme stopped? aPage 5
– (no final spin/drain) selected? aPage 5
– Can be opened by emergency release only. aPage 13
ʑ
Programme does not start.
– Start/reload or
Dealy selected?
– Washer dryer door closed properly?
ʑ
Detergent solution is not
drained.
– Clean the drain pump. aInstallation and maintenance
instructions, Page 8
– Clean waste pipe and/or drainage hose.
ʑ
Water not visible in the drum.
– Not a fault – water below the visible area.
ʑ
Spin result not satisfactory.
– Wash small and large items of laundry together.
– â Less Iron selected? aPage 10
– Speed selected too low? aPage 9
ʑ
Spin cycle performed several
times.
– Not a fault – unbalanced load detection system adjusts the
imbalance.
ʑ
Compartment ~ not rinsed
out completely.
– Remove the insert. Clean detergent drawer and insert it again.
aInstallation and maintenance instructions, Page 7
ʑ
Odour formation in the
washer dryer.
– Run the Fluff Clean 90°C programme without laundry.
– Use standard detergents.
ʑ
Foam escapes from the
detergent drawer.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and
pour into compartment II in the detergent drawer.
– Reduce detergent dosage for the next wash cycle.
– Use commercially available low foam detergents and care
products which are suitable for use in washer dryer.
ʑ
Excessive noise, vibrations
and “wandering” during spin
cycle.
– Are the appliance feet fixed?
Secure the appliance feet. aInstallation and maintenance
instructions, Page 5
– Transport bolts removed?
Remove transport bolts. aInstallation and maintenance
instructions, Page 3
ʑ
Display panel/indicator
lamps do not function while
the appliance is running.
– Power failure?
– Circuit breaker tripped? Reset the circuit breaker/change
theâfuse.
– If the fault occurs repeatedly, call the customer service.
ʑ
Programme sequence
longer than usual.
– Not a fault – unbalanced load detection system adjusts
imbalance by repeatedly distributing the laundry.
– Not a fault – foam detection system active – adds an additional
rinse cycle.
ʑ
Detergent residues on the
laundry.
– Occasionally, phosphate-free detergents contain water-
insoluble residues.
– Select müRinse/Spin or brush off residues when the laundry
is dry.
ʑ
Spinning noise during drying.
– This is an innovative process called thermospinning to reduce
energy consumption during drying.
ʑ
Differently coloured fluff from
the previous drying cycle is
redeposited on the laundry in
the following washing cycle.
– Run the Fluff Clean : (cold) programme without laundry
inside to remove fluff accumulated in the tub during tumble
drying.
ʑ
Water inlet noise during
drying, Water tap symbol
isâflashing during drying.
– The machine includes a self cleaning function to remove fluff
that is released from laundry during drying. This is done with
help of a small amount of tap water. Open the water tap
also during drying.
13
ʑ
Drying duration extended.
– According to the air cooling principle, higher environment
temperature will result in poor drying performance, so the
drying duration will be extended. Ensure a good ventilation
toâremove exhaust heat.
– Cooling air inlet filter blocked? aInstallation and maintenance
instructions, Page 9: Clean the air inlet filter
– Run the Fluff Clean : (cold) programme without laundry
toâremove fluff accumulated in the tub and drying system.
ʑ
Drying programme does not
start.
– Drying programme not selected? aPage 9:
9cDry option
button and Page 7: Programme overview
– Loading door not closed properly?
– Pump is blocked. aInstallation and maintenance instructions,
Page 8: Clean the pump
ʑ
The drying result is not
satisfactory (laundry is not dry
enough).
– Too high environmental temperature (above 30â°C) or bad
ventilation of the room, where the washer dryer is placed –
ensure good ventilation to remove exhaust heat.
– The laundry has not been spun well enough before drying –
always set the highest selectable spin speed for all washing
programmes.
– Machine overload: please follow the load recommendation
inâthe progamme table and load display, do not overload
machine, because of maximum load amount for drying is lower
than for washing unload the machine after washing with
maximum load for washing and separate the load into two
drying cycles.
– The line voltage of the power supply is too low ( below 200âV)
– ensure suitable power supply.
– Cooling air inlet filter blocked? aInstallation and maintenance
instructions, Page 9: Clean the air inlet filter
– Thick multilayered textiles or textiles with thick fillings – these
textiles easily dry on the surface, but not inside. This
equalization process may take longer. Please use time drying
programs to completely dry these kinds of textiles.
ʑ
A small amount of water is
observed dripping on the
dried laundry load when the
door is opened.
– Drying time is shortened with a small load. Some residual
moisture may remain in the drying system. Opening the door
quickly creates a suction effect which pulls moisture from the
drying system.
– Open the door slowly. Avoid jerking the door open.
ʑ
If you cannot correct a fault yourself or a repair is required:
– Turn the programme selector to Off and pull the mains plug out of the socket.
– Turn off the tap and call customer service.
Emergency release e.g. in the event of power failure
The programme will continue to run when the power is restored.
However, if the laundry has to be removed, the washing
machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot.
If possible, leave it to cool down.
Do not open the washer dryer door if water can be seen
through the glass.
– Set the programme selector to Off and disconnect the mains
plug.
– Drain the detergent solution. aInstallation and maintenance
instructions, Page 8
– Pull the emergency release with a tool and release.
The washer dryer door can then be opened.
What to do if ...
Washer dryer
Read these instructions before switching on the
washer dryer. Also follow the separate Installation and
maintenance instructions.
2 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens WD14H421EU bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens WD14H421EU in de taal/talen: Engels als bijlage per email.

De handleiding is 2,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Siemens WD14H421EU

Siemens WD14H421EU Gebruiksaanwijzing - Nederlands - 10 pagina's

Siemens WD14H421EU Gebruiksaanwijzing - Deutsch - 10 pagina's

Siemens WD14H421EU Gebruiksaanwijzing - Français - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info