en
Fold out picture pages.
Setting up
Figure
Connect the wiping tool to the suction
pipe.
Figure
Press the release button.
Figure
Remove the casing from the cloth hold-
er and place it to one side.
Figure
Lay a new cleaning cloth on the floor
and position the cloth holder in the cen-
tre of the cloth.
Secure the cleaning cloth at the clamp-
ing points.
Figure
Refit the casing and click it into the
cloth holder.
!
Do not attach the cloth holder by hand
=> there is a risk of injury.
Figure
Remove the cleaning cloth from the
nozzle after use and dispose of it with
the household rubbish.
6
5
4
3
2
1
Care
Switch off the vacuum cleaner before you
start any work on it.
Figure
Pull the wiping tool from the suction
pipe. Dirty bristles on the tool may be
cleaned using the crevice nozzle.
!
Please note
Clean the tool casing and cloth holder
using a moist cloth if necessary.
Accessories
You can use commercially available wet
cleaning cloths for the tool.
Subject to technical changes.
7
5
