690258
18
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
18
Trouble shooting
Problem Possible causes Solution
The display does not
react when touched.
Dirt on the display.
Fingers are too cold.
Clean the display with a damp cotton
cloth (not too wet).
Warm your ngers a little bit and try
again.
” icon ashes The steam release button (13)
on the iron handle has not been
pressed during the last 8 minutes,
and the auto shut-off system has
been activated.
Press the steam release button again to
switch the steam station back on.
icon ashes.
Water tank is empty. Fill the water tank.
” icon ashes.
Boiler and lter must be rinsed. Rinse the lter and the boiler according
to the cleaning instructions in this manual
(see section F).
When touching the
display, the beep cannot
be heard.
The beep has been deactivated. Activate it according to instructions in this
manual. (6. Beep activation/deactivation)
The steam generator
does not come on.
There is a connection problem.
The main power button is not
switched on.
Check the mains cable (5), the plug
and the socket.
Set the main power button (9) to the “I”
position (illuminated in red).
The iron does not heat
up.
The main power button is not
switched on.
The temperature is set to a low
position.
Set the main power button (9) to the “I”
position (illuminated in red).
Set the temperature to the desired
position.
The iron begins to smoke
when switched on.
• During rst use: certain
components on the appliance
have been lightly greased at the
factory and may produce a little
smoke when initially heated.
During subsequent use: the
soleplate may be soiled.
This is completely normal and will stop
after a short while.
Clean the soleplate according to the
cleaning instructions in this manual.
Water ows through the
holes on the soleplate.
The steam function is being used
before it has reached the correct
temperature.
The water is condensing inside
the pipes because steam is being
used for the rst time or has not
been used for a long time.
• Reduce the steam ow when ironing at
low temperatures.
Point the iron away from the ironing
area and press the steam release
button until steam is produced.
Y
en
Tips to help you save energy
Steam production consumes the most energy. To help
minimise the energy used, follow the advice below:
Start by ironing the fabrics that require the lowest
ironing temperature.
Check the recommended ironing temperature in the
label on the garment.
Regulate the steam according to the selected
ironing temperature, following the instructions in this
manual.
Try to Iron the fabrics while they are still damp and
reduce the steam setting. Steam will be generated
from the fabrics rather than the iron. If you tumble dry
your fabrics before ironing them, set the tumble drier
on the ‘iron dry’ programme.
• If the fabrics are damp enough, turn off the steam
regulator completely.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens TS45200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens TS45200 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 4,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info