en Operating the appliance
34
Very sensitive: This setting adjusts the
programme strength for difficult
conditions of use, for example firmly
dried on food remnants. This setting is
recommended if using biological or eco
detergents which contain lower
amounts of active agents. The energy
and water consumption is adjusted
accordingly.
extraDry
The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Caution if utensils are delicate!)
You can switch the extraDry function on
or off.
Eco forecast
When Eco forecast is activated, the
average water and energy consumption
of the selected programme is briefly
displayed on the display window at the
top @.
AutoPowerOff (Switching off
automatically after the end of
the programme)
Auto Power Off
To save energy, the dishwasher
is switched off 1 minute after
the programme ends. You can also
change this setting.
Possible settings are:
■ off: The appliance does not switch
off automatically.
■ After one minute: The appliance
switches off after 1 minute.
■ After two hours: The appliance
switches off after 2 hours.
Note: Note that for the settings "After
one minute" and "After two hours", the
interior lighting 1" is switched off. To
activate the interior lighting, press the
ON/OFF switch (.
emotionLight (interior
lighting) *
EmotionLight
* Depending on the features of your
dishwasher
EmotionLight 1" is the interior lighting
for your dishwasher. You can switch
the interior lighting on or off.
Notes
■ Depending on the setting of
AutoPowerOff, the interior lighting is
either switched on or off.
■ Note that the interior lighting is
automatically switched off after 1
hour when it is switched on and the
door is open.
Front display *
Front display
* depending on the features of your
dishwasher
You can switch the front display ): on
or off (additional programme
information).
TimeLight (Optical display
while the programme is
running) *
timeLight
* depending on the features of your
dishwasher
While programme is running, an optical
display (additional programme
information) is indicated on the floor
under the appliance door. If the base
panel is pulled forwards or if the
appliance is installed at eye-level with
flush furniture front, the display is not
visible.
You can switch the optical display on or
off.
