41481
1
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
Siemens Building Technologies/HVAC Products - REV23 1.04.05 1/3
Set Time and day of programmer
T - Set T T Temp.
Set time for ON/OFF in the Auto Mode.
1 time period. e.g. ON 0700 OFF 2300.
2 time periods. e.g. ON 0600 OFF 0900, ON 1700 OFF 2200.
3 time periods. e.g. ON 0600 OFF 0800, ON 1100 OFF 1300,
ON 1700 OFF 2200.
Temperatures for T are also set in this setting.
T Temp will be on when Time Periods are off. Setting can be seen
on 24hr clock at bottom of screen.
Holiday Mode - SET No. # of days you will be gone and T temp. while away.
Operating Instructions REV23
Auto Mode - Runs according to the times which have been programmed
into REV (See Set Points) It will follow the heating periods of T and T .
Economy Mode/MAN will stay on T temp for 24 hours x 7 days or until another
mode has been selected.
OFF/ Frost protection for Hydronic floor systems. Factory Set 5 C.
Programmed Timed override. Unit will Run at T from the start of 1st time
period to the end of the last time period.
Selects between Run Modes - , , , and .
Can temporarily increase or decrease Set Point temps for T or T . It will
revert back to original Set Point after a change in Run Modes or a Time Period.
- This can be used in all 5 modes. 4.0 C
Override button selects between T & T in & modes.
Will control for programmed days away at T Set temp.
Scroll Button. Selects Programming Mode. Click down on roller to get in, and
roll to change time, temp. and program settings.
Press ESC to get out of Program Mode and into Run Mode or simply don't touch
the scroll button for 20 seconds.
Comfort Mode/MAN will stay on T temp for 24 hours x 7 days or until another
mode has been selected.
AUTO
1)
2)
3)
4)
REV23 Thermostats can be operated in 5 different modes:
5)
AUTO
(At home during the day.)
To Program Mode:
T
T
Esc
AUTO
Time/Day of the week (must be done)
Click roller down, scroll roller until " " starts to flash.
Click roller down, scroll roller to set hours. e.g. 13
Click roller down, scroll roller to set minutes. e.g. 15
Click roller down, will be flashing, scroll to put correct
day. e.g. Monday Tue, etc.
Press escape time and day are now set.
Program time periods to run in Auto.
Click roller down, scroll roller until " " starts to flash.
Click roller down, " " starts to flash (This is setting time
period from Monday to Sunday), or scroll roller to select " "
Monday - Friday " " Saturday - Sunday or " " individual days.
Click roller down, " " will appear, scroll roller to select
number of time periods you wish to have. e.g. 2 " ." Click roller
down. The indication for "TIME ON" will flash at the bottom of screen " ".
Click roller, scroll to adjust TIME ON. e.g. 0600 hrs.
Click roller, scroll to adjust TIME OFF. e.g. 0800 hrs.
Click roller, scroll to adjust T for that time period. e.g. 19 C.
Click roller and time indication will flash at bottom of screen for 2 nd
time period to start.
Click roller, scroll to adjust ON time, e.g. 1700 hrs.
Click roller, scroll to adjust OFF time, e.g. 2200 hrs.
Click roller, scroll to adjust T temp. for that time period. e.g. 20 C.
Press escape to get out of the program mode.
To set holiday mode.
Click roller, scroll roller till " T " starts to flash.
Click roller, " " starts to flash. Scroll to adjust to which day you wish
to go on holiday. e.g. Friday
Click roller, " " will start to flash,
Scroll roller to adjust number of days away. e.g. 2 days
Click roller, " T " will now flash, adjust for temp. to be set while away.
e.g. 10 C.
Press escape to return to Run Mode.
* Please note can also be used to turn heating off while on holidays.
If you come back from holidays early and there are still days on there,
you will have to adjust to zero to put REV23 back to normal operation.
e.g.D .
To Program
PROGRAMMING COMPLETE. YOU SHOULD NOT HAVE TO USE SCROLL
BUTTON AGAIN UNLESS YOU NEED TO MAKE FURTHER CHANGES. ALL
ADJUSTMENT CAN NOW BE MADE BY TOP BUTTONS.
5
Siemens Building Technologies/HVAC Products - REV23 1.04.05 2/3
Program T ,T and T temperatures.
Click roller down, scroll roller till "T" starts to flash.
Click roller down, scroll roller till "T : starts to flash.
Click roller down, scroll roller to set T temp. e.g. 19 C.
Click Roller down and repeat steps to adjust other temp.
Factory settings are T 19 C T 16 C and T 5 C.
T
2
1
1 - 7
Indicates T Temp. ON
Indicates T Temp. ON
Days of the week
Low battery
Run Modes
Indicates heating "ON"
Run Mode selector button
Temperature Increase
Temperature Decrease
Override Button
24 Hour Clock
Scroll Button (Programming Only)
Esc
Return to run mode
REV23 Screen Features
Siemens Building Technologies/HVAC Products - REV23 1.04.05 3/3 -
PLEASE NOTE (WIRING INSTRUCTIONS) : Thermostat wires running from your heater/boiler to your REV23 Thermostat must go in either L, L1 or L2. Do not
put these into the T1 or T2 connections or you will damage the REV23. T1 and T2 are only for Telephone Interface Kit (TEL110-EN).
For further info. on REV23, please refer to data sheet no. 2264.
Programming
Modes
Only used with
Telephone Interface
Kit (TEL110-EN)
REV Thermostat Operating Tips
Always look at the bottom of the screen at the 24hr clock to see what time the
thermostat is programmed to come on and off. You can then instantly see if your heater
should be on either
temp or temp. If the heating is not on when the time clock
indicates that it should check to see that the time is set correctly. (see programming
sheet)
EXAMPLE
The above 24 hour time clock is running in
and is programmed for 2 time periods.
Heating is to come on at 0600 and off at 0800, it will then control to
temp. between
0800 and 1700, then heating will come back on at 1700 and off again at 2300.The
heating will then only come on during the night if the temperature in the house drops
below whatever
is set at.
What if you come home during the day at 1300 and would like the heating on?
Simply hit the
override button. will now appear on the screen and the heater
will now start. If you decide to leave again simply press the
over ride key and
it will return to
.
What if you are leaving your house for the weekend and would like to turn the
heating off?
Simply press
Program selector button 3 times until appears in the top right-hand
corner of the screen. The heating will now only come on if the house drops below 5 deg.
(this can also be used to turn heating off in summer)
What happens if a visitor complains of being too hot or too cold and would like a
temporary adjustment made to the heating set point temperature?
Simply press
button to temporally adjust the heating set point up or down.
Please Note: make sure that
is already displayed on the screen before making
adjustments.
What happens if the
Battery Symbol appears on the screen?
This means that you need to change the Batteries in your thermostat. You have
approximately 1 month to do this or you will lose your program. To change your batteries
simply slide the REV up out of its base. Open the battery compartment and remove the
old batteries. Place the new batteries in straight away, (you have 60 seconds to do this
other wise you will loose your programmed settings and your REV will return to factory
settings.)
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Siemens-REV23

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens REV23 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens REV23 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Siemens REV23

Siemens REV23 Installatiehandleiding - Nederlands - 22 pagina's

Siemens REV23 Gebruiksaanwijzing - Nederlands - 2 pagina's

Siemens REV23 Installatiehandleiding - Deutsch, English - 22 pagina's

Siemens REV23 Gebruiksaanwijzing - Français - 2 pagina's

Siemens REV23 Installatiehandleiding - Français, Italiano, Espanõl, Polski, Dansk, Svenska - 22 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info