671508
346
Verklein
Vergroot
Pagina terug
1/414
Pagina verder
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
346 Operating Instructions, 11/2017
Message text character set
LOGO! 0BA6 and higher versions support five character sets for messages. Of these, you
can select two for the display of message texts with the File → Message Text Settings
(Page 54) menu command or from the "Msg Config" menu of LOGO!. Of the fifty possible
message texts that you can configure, you can select any number of them to be from the first
language and any number from the second language. For example, you could configure fifty
message text function blocks that have a single message text for Character Set 1.
Alternatively, you could configure twenty-five message text function blocks, each of which
has two message texts: one for Character Set 1 and one for Character Set 2. Any
combination is valid such that the total does not exceed fifty.
The Message text dialog displays the character sets that are currently available for your
message text, as configured in the message text settings. To use a character set, select the
"Enabled" check box, and the button for the character set. Characters that you subsequently
type will be from the character set that you enabled and selected. If you deselect the
"Enabled" check box for a character set, LOGO!Soft Comfort will prompt you for confirmation
and then delete the message text, if it exists, that corresponds to that character set.
The character set of a message text is independent of the language setting for the
LOGO! onboard display menus. They can be different.
Chinese character set
The LOGO! Base Module and LOGO! TD support the Chinese character set (GB-2312) for
the People's Republic of China. The devices use Microsoft Windows encoding for this
character set. The Windows encoding allows the devices to display the same characters as
shown in the LOGO!Soft Comfort message text editor when you are using a Chinese
emulator or a Chinese version of Microsoft Windows.
The Chinese character set requires a Chinese version of Windows or a Chinese emulator to
properly display Chinese characters in the LOGO!Soft Comfort message text editor. You
must start the Chinese emulator before you open the the message text function block in
LOGO!Soft Comfort.
Message ticker
You can configure a message text to tick, or to not tick. Two types of message ticking exist:
Character by character
Line by line
Messages that tick character by character scroll off the characters of the message line one
character at a time to the left with the additional characters scrolling in one at a time from the
right. The time interval for the tick is specified by the TickTime message text setting.
Messages that tick line by line by line scroll one half of the message off the display to the left
with the second half of the message scrolling in from the right. The time interval for the tick is
ten times the TickTime parameter. The two halves of the message simply alternate on the
LOGO! onboard display or LOGO! TD.
The tick time is the interval of time by which a character or a line of text ticks off the screen.
The tick time is a global message text parameter for all message texts.
Example: Tick Message Character by Character
346

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens LOGO Soft Comfort Online Help bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens LOGO Soft Comfort Online Help in de taal/talen: Engels als bijlage per email.

De handleiding is 12,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help Gebruiksaanwijzing - Deutsch - 428 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info