23
Operating the extractor hood
Switching off:
There are 2 different methods of switching
off the appliance whether in manual or
automatic mode.
Switching off directly:
Press the
L button.
Important: All fan functions are switched
off.
Switching off appliance with fan run-on:
Insert filter drawer all the way. The fans
operate in the last switched-on stage for
around another 10 minutes and then switch
off.
❑ When the extractor hood is switched off,
the operating mode and the fan setting
are saved. When the filter drawer is
pulled out, the extractor hood switches
on again at the saved settings.
❑ If the intensive setting is switched on
when the filter drawer is inserted, the
intensive setting automatically switches
back during run-on.
❑ If intermittent ventilation is switched on, it
continues operating normally following
run-on.
Adjusting the brightness:
❑ Hold down the a button until the
desired brightness is obtained.
Adjusting the sensitivity of the sensor
control:
1. Press and hold down the automatic
button.
2. To display the current sensitivity, press
the
+ or – button.
3. You can now change the sensitivity of
the sensor control by pressing the
+ or
– button.
❑ Factory setting:
@.
❑ Lowest setting:
{.
❑ Highest setting:
Ö.
Light
❑ The light can be used at any time, even
when the appliance has been switched
off.
Switching on/off: Press the
a button.
