13
Setting a later end time
You can change the time at which you wish your dish to be
ready. The appliance starts automatically and is ready at the
desired time. You can, for example, put your dish in the
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
For some programmes it is not possible to change the end
time.
For the Steam type of heating, the cooking time starts counting
down after the heating-up time. The selected end time is
delayed by the length of the heating-up time.
Example in the picture: It is 9:30, the dish takes 45 minutes to
cook, but is not to be ready until 12:45.
Requirement: The cooking operation which was set has not
started. A cooking time is set. The
0 time-setting options are
open.
1. Press the
y button to switch to ¿ "End".
The time at which the operation will finish is shown in the
display.
2. Use the rotary selector to set a later end time.
3. Exit the time-setting options with the
0 button.
4. Confirm with the Start button.
The setting is applied. The appliance is in standby. The
y
end time is shown in the display. The cooking operation
starts at the appropriate time. The cooking time counts down
in the display.
Changing the end time
The end time can be changed provided the appliance is in
standby. Press the
0 button. Switch to y "End" using the ¿
button and turn the rotary selector to change the end time. Exit
the time-setting options with the
0 button.
The cooking time has elapsed
A signal sounds. The appliance stops heating. The
x cooking
time "0:00" appears in the display. Press the
0 button to stop
the signal.
Cancelling the end time
The end time can be cancelled provided the appliance is in
standby. Press the
0 button. Press the y button to switch to ¿
"End". Turn back the end time using the rotary selector until the
display goes out. Exit the time-setting options with the
0
button. The selected cooking time starts counting down straight
away.
Setting the clock
So that you can set the clock, you must switch off the
appliance.
Example: changing from summer to winter time.
1. Switch off the appliance.
2. Press the
0 button.
3. Press the
¿ button to switch to the 0 clock.
4. Use the rotary selector to change the clock.
5. Exit the time-setting options with the
0 button.
After a power cut
After a power cut, "Set clock" will appear in the display. Set the
current time using the rotary selector. Exit the time-setting
options with the
0 button. The time is applied.
Changing the clock display
When the appliance is switched off, the current time appears on
the display. You can change this display (see section: Basic
settings).
Automatic programmes
The automatic programmes enable you to prepare food very
easily. There are 16 programme groups containing a total of
70 programmes.
In this section, you will find out
■ how to set one of the automatic programmes
■ hints and tips on the programmes
■ Which programmes you can set (programme tables)
Setting a programme
Select a suitable programme from the programme table. Follow
the instructions for the programmes.
Example in the picture: you want to steam 500 g fresh chicken
breast.
■ Programme group “Poultry“
■ Programme "Chicken breast, fresh, steamed"
Selecting a programme group
1. Press the ‡ button to switch on the appliance.
2. Press the
X button.
The first programme group, "Vegetables", appears in the
display.
3. Turn the rotary selector until the required programme group
appears.
Selecting the programme
4. Press the ¿ button.
The first programme of the selected programme group is
highlighted.
5. Turn the rotary selector until the required programme
appears.
