529658
11
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
11
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
as a timer.
Turn off a hotplate automatically
Enter the cooking time for the desired hotplate. The hotplate
turns off automatically once the time has elapsed.
Programming
1.Select the desired power level.
2.Press the 0 symbol. Thex indicator of the hotplate lights
up. ‹‹ lights up in the time program function display. To
select another hotplate, press the
0 symbol several times
until the
xindicator for the desired hotplate lights up.
3.Select the required cooking time in the programming panel.
The possible previous setting is, from left to right 1,2, 3, etc.,
up to 10 minutes. Within the next 10 seconds, continue past
the options in the programming panel until reaching the
desired time.
After a few seconds the cooking time begins to count down.
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming panel, the cooking time is reduced by one
minute, if it is held down the time is automatically reduced to
one minute.
If the previous setting from 6 to10 is pressed in the
programming panel , the cooking time is increased by one
minute, if it is held down the time is automatically increased to
99 minutes.
Once the time has elapsed
The hotplate switches off. An audible signal sounds and
‹‹
appears in the time program function display for 10 seconds.
The
x indicator lights up. Pressing the 0 symbol turns off the
indicators and stops the signal.
Changing or cancelling the time
Press the 0 symbol several times until the required x
indicator lights up. Change the cooking time in the
programming panel, or set to
‹‹.
Notes
If a cooking time has been programmed in several zones, it
can be set to display all time values. To do this, press the
0
symbol several times until the
x indicator for the required
hotplate lights up.
Cooking times of up to 99 minutes can be programmed.
Automatic timer
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a zone may be cancelled or
changed:
Press the
0 symbol several times until the required x
indicator lights up. Change the cooking time in the
programming panel, or set to
‹‹.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
Programming
1.Press the 0 symbol several times until the W indicator lights
up.
‹‹ lights up in the time program function display.
2.Select the desired time in the programming panel.
The timer starts to count down after a few seconds.
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹ is shown, and the W indicator comes on. After 10 seconds
the indicators turn off.
Pressing the
0 symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
Press the
0 symbol several times until the W indicator lights
up. Change the cooking time in the programming panel, or set
to
‹‹.
 
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens EH645MB11M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens EH645MB11M in de taal/talen: Engels als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Siemens EH645MB11M

Siemens EH645MB11M Installatiehandleiding - Nederlands - 13 pagina's

Siemens EH645MB11M Gebruiksaanwijzing - Nederlands - 56 pagina's

Siemens EH645MB11M Installatiehandleiding - Deutsch - 13 pagina's

Siemens EH645MB11M Gebruiksaanwijzing - Deutsch - 56 pagina's

Siemens EH645MB11M Installatiehandleiding - English, Français - 13 pagina's

Siemens EH645MB11M Gebruiksaanwijzing - Français - 56 pagina's

Siemens EH645MB11M Installatiehandleiding - Italiano - 13 pagina's

Siemens EH645MB11M Gebruiksaanwijzing - Italiano - 56 pagina's

Siemens EH645MB11M Installatiehandleiding - Português - 13 pagina's

Siemens EH645MB11M Gebruiksaanwijzing - Português - 24 pagina's

Siemens EH645MB11M Installatiehandleiding - Espanõl - 13 pagina's

Siemens EH645MB11M Gebruiksaanwijzing - Espanõl - 24 pagina's

Siemens EH645MB11M Installatiehandleiding - Polski, Türkiye, Dansk - 13 pagina's

Siemens EH645MB11M Gebruiksaanwijzing - Dansk - 44 pagina's

Siemens EH645MB11M Installatiehandleiding - Svenska - 13 pagina's

Siemens EH645MB11M Gebruiksaanwijzing - Svenska - 44 pagina's

Siemens EH645MB11M Installatiehandleiding - Norsk - 13 pagina's

Siemens EH645MB11M Gebruiksaanwijzing - Norsk - 44 pagina's

Siemens EH645MB11M Installatiehandleiding - Suomi - 13 pagina's

Siemens EH645MB11M Gebruiksaanwijzing - Suomi - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info