62443
1
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
1
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / Overview.fm / 21.10.2008
Gigaset AL180
V
11.12. 11:56
INT MENU
h
1 Charge status of
the batteries
2Display keys
3Message key
Flashes: new messages
received
4Directory key
5 Control key (u)
6Talk key
7 End call key and
On/Off key
8 Ringer tone on/off
(press and hold in
idle status)
9 Keypad lock on/off
(press and hold)
10 Recall key
- Consultation call
(flash)
- Dialling pause
(press and hold)
11 Microphone
12 "Microphone off" key
The base station at a glance
AL180 base station
9
2
4
6
3
5
7
11
1
The handset at a glance
10
12
8
Display key on handset:
Pressing a key launches the function that
appears above that key in the display.
Display Function when pressed
INT
Call other registered hand-
sets
¢ p. 9.
MENU
Open main/submenu
(see Menu tree
¢ p. 13).
Go back one menu level.
U
Scroll up/down or adjust vol-
ume with u.
T
Move cursor to left/right
with u.
˜
Backspace deletes one
character at a time.
OK
Confirm menu function or
save entry.
Registration/paging key:
Search for handsets (press briefly, "Paging"
¢ p. 9)
Register handsets (press and hold
¢ p. 9).
2
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / Overview.fm / 21.10.2008
Safety precautions
Emergency numbers cannot be dialled if the keypad lock
(¢ p. 1) is activated!
Not all of the functions described in this user guide are
available in all countries.
Care
Wipe the base station, charging cradle and handset
with a damp cloth (do not use solvent) or an anti
-
static cloth.
Never use a dry cloth. This can cause static.
Contact with liquid
If the handset has come into contact with liquid:
Switch off the handset and remove the bat-
tery pack immediately.
Allow the liquid to drain from the handset.
Pat all parts dry, then place the handset with
the battery compartment open and the keypad
facing down in a dry, warm place for at least
72
hours (not in a microwave, oven etc.).
Do not switch on the handset again until it is
completely dry.
When it has fully dried out, you will normally be
able to use it again.
Read this user guide and the safety precautions carefully
before use. Explain their contents and the potential haz
-
ards associated with using the telephone to your chil-
dren.
Only use the mains unit supplied.
Fit only the recommended, rechargeable
batteries (¢ p. 11), i.e. never use a conven-
tional (non-rechargeable) battery or other bat-
tery types as this could result in significant
health risks and personal injury.
The operation of medical appliances may be
affected. Be aware of the technical conditions
in
your particular environment, e.g. doctor's
surgery.
Do not hold the rear of the handset to your ear
when it is ringing. Otherwise you risk serious
and permanent damage to your hearing.
The handset may cause an unpleasant hum-
ming noise in hearing aids.
Do not install the phone in a bathroom or
shower room. The handset and base station
are
not splashproof.
Do not use your phone in environments with a
potential explosion hazard, e.g. paint shops.
If you give your Gigaset to someone else, make
sure you also give them the user guide.
Please remove faulty base stations from use or
have them repaired by our service, as they could
interfere with other wireless services.
Disposal
Batteries should not be disposed of in general
household waste. Observe the local waste dis
-
posal regulations, details of which can be
obtained from your local authority or the dealer
you purchased the product from.
All electrical and electronic equipment must be
disposed of separately from general household
waste using the sites designated by local
authorities.
If a product displays this symbol of a crossed-out
rubbish bin, the product is subject to European
Directive 2002/96/EC.
The appropriate disposal and separate collec-
tion of used equipment serve to prevent poten-
tial harm to the environment and to health.
They are a precondition for the re-use and recy
-
cling of used electrical and electronic equip-
ment.
For further information on disposing of your
used equipment, please contact your local
authority, your refuse collection service or the
dealer you purchased the product from.
$
ƒ
ECO DECT
You are helping to protect the environment with
your Gigaset
AL180.
Reduced energy consumption
Your telephone has an energy-saving adapter
plug and uses less energy.
Reduced transmission power
The transmission power of your telephone is
reduced automatically:
The handset's transmission power is reduced
depending on the distance to the base station.
The transmission power on the base station is
reduced to virtually zero when only one handset
is registered and the handset is in the base sta
-
tion.
You can reduce the transmission power of the
handset and base station even more by using
Eco Mode/Eco Mode+ (see Menu tree
¢ p. 14):
Eco Mode: 80% transmission power reduc-
tion in standby mode and during a call (the
range of the base station is reduced).
Eco Mode+: 100% transmission power deac-
tivation in standby mode (top left display
icon
½). Press and hold the talk key c to
check that the base station can be reached.
You will hear the ringing tone if the base sta
-
tion can be reached.
!
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / starting.fm / 21.10.2008
3
First steps
Check the pack contents
One Gigaset AL180 base station,
one mains adapter,
one Gigaset AL18H handset,
one phone cord,
two batteries,
one battery cover,
one user guide.
If you have purchased a model with multiple handsets, the package should contain two
batteries, a battery cover and a charging cradle with mains adapter for each additional
handset.
Setting up the base station and charging cradle (if included)
The base station and charging cradle are designed for use in enclosed dry rooms with a
temperature range of +5
°C to +45 °C.
¤ Set up the base station at a central location on a flat, non-slip surface in your house or
apartment.
The phone's feet do not usually leave any marks on surfaces. However, due to the multi-
tude of different varnishes and polishes used on today's furnishings, the occurrence of
marks on the surfaces cannot be completely ruled out.
You can also mount the base station and charging cradle on the wall.
Please note:
Never expose the telephone to the influence of heat sources, direct sunlight or other
electrical devices.
Protect your Gigaset from moisture, dust, corrosive liquids and vapours.
Connecting the base station
¤ First connect the mains adapter 1.
¤ Then connect the telephone jack 2
and insert the cables into the cable
ducts.
Please note:
The mains adapter must always be
connected, as the phone will not oper
-
ate without mains connection.
Only use the mains adapter and phone
cord supplied. Pin connections on tel
-
ephone cables can vary.
Please note
Pay attention to the range of the base station.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings.
The range is reduced when Eco Mode is activated (
¢ p. 14).
1
1
1
2
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / starting.fm / 21.10.2008
4
Connecting the charging cradle (if included)
Setting up the handset for use
The display is protected by a plastic film.
Please remove the protective film!
Inserting the batteries and closing the battery cover
¤ Connect the flat plug from the power supply 1.
¤ Plug the mains adapter into the plug socket 2.
If you need to disconnect the plug from the charging cradle,
press the release button 1 and disconnect the plug 2.
1
2
1
2
Warning
Use only the rechargeable batteries recommended by Gigaset Communications
GmbH
*
(¢ p. 11). Never use a conventional (non-rechargeable) battery or other
battery types as this could result in significant health risks and personal injury.
For
example, the batteries could explode. The phone could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
* Gigaset Communications GmbH is a trademark licensee of Siemens AG.
¤ Insert the batteries the right
way round.
The polarity is indicated in/on
the battery compartment.
¤ First insert the battery cover at
the top a.
¤ Then press the cover b until it clicks
into place.
If you need to open the battery cover,
for instance to replace the batteries,
place your fingertip in the cavity on the
casing and pull the battery cover
upwards.
a
b
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / starting.fm / 21.10.2008
5
Placing the handset in the base station and registering
If you have purchased a model with multiple handsets, repeat the registration process
for each individual handset. Handsets are assigned the lowest available internal number
(1-4). If more than one handset is registered to the base station, the internal handset
number appears in the top left of the display, e.g. 2. If the internal numbers 1–4 are
already assigned to other devices, the number
4 will be overwritten.
Initial charging and discharging of the batteries
The correct charge level can only be displayed if the batteries are first fully charged and
discharged.
Please note
Each key press interrupts the automatic registration.
If automatic registration does not work, the handset will have to be registered
manually
(¢ p. 9).
Only place the handset in the base station or charging cradle that is intended for
it.
V
Registering
V
INT MENU
V
Put into base
MENU
¤ Place the handset in the base station or charging cradle for eight hours.
¤ Then remove the handset from the base station or charging cradle and
do not replace it until the batteries are completely discharged.
8 h
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / starting.fm / 21.10.2008
6
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming calls,
and so that the alarm can be used.
MENU ¢ Settings ¢ OK ¢ Date/Time ¢ OK
¢ Date: ¢ ~ (enter the day, month and year in 6-digit format) ¢ OK
¢ Time: ¢ ~ (enter hours and minutes in 4-digit format) ¢ OK (display message: Saved)
¢ a (press and hold to return to idle status)
Display in idle status
Once the phone is registered and the time set, the idle dis-
play is shown as in this example.
Activating/deactivating the handset
Press and hold the a key to activate or deactivate the hand-
set.
If you place a deactivated handset in the base station or
charging cradle, it will automatically activate.
Your phone is now ready for use.
If you have any questions about using your phone, please read the tips on troubleshooting
("
Questions and answers" ¢ p. 11) or contact our Customer Care team ¢ p. 12.
Please note
After the first battery charge and discharge you may replace your handset in the
base station or charging cradle after every call.
Always repeat the charging and discharging procedure if you remove the batteries
from the handset and reinsert them.
The batteries may warm up during charging. This is not dangerous.
After a while, the charge capacity of the batteries will decrease for technical rea-
sons.
Please note
When entering the time and date, you can move the position of an entry to the left
or right by pressing the control button up or down.
V
11.12. 11:56
INT MENU
7
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / main.fm / 21.10.2008
Making calls
Making external calls and ending calls
External calls are calls using the public telephone
network.
~
(Enter the phone number) ¢c.
The phone number is dialled. (Or you can first
press and hold
c [dial tone] and then enter the
number.) During the call you can adjust the ear
-
piece volume using t and set the volume with u.
End the call/cancel dialling:
Press the end call key a.
You can automatically insert a network provider
dialling code before any phone number
(see
Menu tree "Preselection" ¢ p. 14).
Accepting a call
The handset indicates an incoming call by ringing
and by a display on the screen.
Press the talk key c to accept the call.
When Auto Answer is activated (see Menu tree
¢ p. 14), simply remove the handset from the
base station/charging cradle.
In idle status, use t to activate the menu for set-
ting the call volume and use u to set the volume.
Calling Line Identification
When you get a call, the caller's number will be dis-
played on your handset; the caller's name will be
displayed if it is stored in the directory.
Preconditions:
1 You have asked your network provider for the
caller's number (
CLIP) to be displayed on your
handset screen.
2 The caller has asked the network provider for
his number to be identified (CLI).
®
appears in the display if you have not
requested Calling Line Identification,
Withheld
appears if the caller has withheld CLI, and
Unavail-
able appears if CLI has not been requested.
Muting
You can mute your handset when making external
calls. Your caller can no longer hear you.
Press the "Microphone off" key m during the call to
activate/deactivate the function.
Using the directory and lists
Directory
To open the directory: press h.
You can save up to 40 phone numbers
(max.
32 digits) with corresponding names
(max.
14 characters). Enter letters/characters
¢ p. 11.
Saving the first number in the directory
h ¢ New Entry? ¢ OK
¢ ~ (enter number) ¢ OK
¢ ~ (enter number) ¢ OK
Storing a number in the directory
h ¢ MENU ¢ New Entry ¢ OK
¢ ~ (enter number) ¢ OK
¢ ~ (enter number) ¢ OK
Selecting a directory entry
Open the directory with h. You have the following
options:
Use u to scroll through the entries until the
required name is selected.
Enter the first character of the name and scroll
to the entry with
u, if required.
Dialling with the directory
h ¢ u (select entry) ¢ c
Using other functions
h ¢ u (select entry) ¢ MENU
The following functions can be selected with u:
New Entry
Save new phone number.
Show Number
Display the phone number.
Use Number
Edit or add to the number.
Then
dial or use other functions
with
MENU.
Edit Entry
Edit selected entry.
Delete Entry
Delete selected entry.
Send Entry
Send a single entry to another
handset
(¢ p. 8).
Delete List
Delete all directory entries.
Send List
Send the complete list to
another handset
(¢ p. 8).
Shortcut
For shortcuts, assign the cur-
rent entry to a key.
8
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / main.fm / 21.10.2008
Using shortcut keys
You can assign directory entries to the keys 0 and
2–9:
h ¢ u (select entry) ¢ MENU ¢ Shortcut ¢ OK
¢ ~ (press the key you want to assign the entry to)
To dial, press and hold the required shortcut key.
Sending the directory to another handset
Preconditions:
The sending and receiving handsets must both
be registered to the same base station.
The other handset and the base station can
send and receive directory entries.
h ¢ u (select entry) ¢ MENU ¢ Send Entry /
Send List ¢ OK ¢ ~ (enter the internal number
of the receiving handset) ¢ OK
Last number redial list
This list contains the ten last dialled numbers.
Dialling from the last number redial list
c (press briefly) ¢ u (select entry) ¢ c
Managing entries in the last number redial list
c (press briefly) ¢ u (select entry) ¢ MENU
You can select the following settings:
Calls list/network mailbox list
An advisory tone sounds and the message key
flashes as soon as a new entry appears in the calls
list/answer machine list. A message appears in the
display.
When you press the f key, all the lists are dis-
played. If only one list contains new messages, this
will be opened automatically.
Calls list
Precondition: CLIP (¢ p. 7)
Depending on the type of list set, the calls list con-
tains (¢ p. 14)
answered calls
missed calls
Depending on the type of list set, all numbers of
the last 25 incoming calls are saved or just the
missed calls are saved.
The calls list is displayed as follows:
Number of new entries + number of old, read entries
Open the calls list
f ¢ CallsList 01+02 ¢ OK
The last incoming call is displayed.
If necessary, use u to select another entry.
Using other functions
u (select entry) ¢ MENU
The following functions can be selected with u:
Calling back a caller from the calls list
f ¢ CallsList 01+02 ¢ OK ¢ u (select entry)
¢ c
Assigning key 1 for fast access to the
network mailbox
Simply press and hold key 1 on the handset and
you will be connected directly to the network mail
-
box.
See Menu tree ¢ p. 13.
Use Number
Edit or add to the number.
Then
dial or use other functions
with
MENU.
Copy to Dir.
Copy an entry to the directory.
Delete Entry
Delete selected entry.
Delete List
Delete all entries.
Please note:
If calls are saved in the network mailbox, you will
receive a message if the appropriate settings have
been made (depending on your network pro
-
vider).
Delete Entry
Delete current entry.
Copy to Dir.
Copy an entry to the directory.
Date/Time
Call date and time (if set).
Status
New Call: new missed call.
Old Call: entry already read.
Answ.: call taken.
Delete List
Warning! All old and new
entries will be deleted.
CallsList 01+02
9
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / main.fm / 21.10.2008
Locating a handset ("paging")
You can locate your handset using the base station.
Briefly press the registration/paging key on the
base station
(¢ p. 1).
All handsets will ring simultaneously ("pag-
ing"), even if the ringer tones are deactivated.
End paging: briefly press the register/paging key
on the base station
(¢ p. 1) or the talk key c on
a handset.
Registering handsets
You can register up to four handsets on your base
station (Gigaset
AL18H) recommended).
For automatic registration of handsets to
Gigaset
AL180, see ¢ p. 5.
Manual registration of handsets to Gigaset AL180
1. On the handset: MENU ¢ Settings ¢ OK
¢ Handset ¢ OK ¢ Register HS ¢ Enter the sys-
tem PIN of the base station (default is 0000) ¢ OK.
Registering flashes in the display.
2. On the base station: within 60 sec. of entering
the system PIN, press and hold the registration/
paging key
(¢ p. 1) (min. 3 sec.).
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting
the base station to its default settings. This will
also reset every other setting
¢ p. 10.
If you have only registered handsets for other GAP-
compatible devices, these can only be de-regis
-
tered with a hardware reset ¢ p. 10.
Using several handsets
Making internal calls
Internal calls are free calls to other handsets that
are registered to the same base station.
To make a call to other handsets, press
INT ¢ ~ (1...4, enter internal number of the
handset)
¢ OK, the handset is called or
INT ¢ star key P ¢ OK, all handsets are
called.
When a participant answers you can speak to
them. To end the call, press
a.
Internal consultation call/connecting
a call
You are in conversation with an external partici-
pant. Press the INT key and call one or all handsets.
The external participant hears the hold music.
Before the internal participant has answered,
press the end call key
a; the call is diverted to
the participant who answers the call.
After the internal participant has answered,
you can talk to him. Press the end call key
a;
the call is diverted, or press the display key
;
you are reconnected to the external participant.
Listening in to an external call
You are conducting an external call. An internal
participant can listen in on this call and take part in
the conversation (conference).
Precondition: The Listening in function must be
activated.
Activating/deactivating listening in
MENU ¢ Settings ¢ OK ¢ Base ¢ OK
¢ Listening in ¢ OK ( = on)
Internal listening in (conference)
You want to listen in to an existing external call.
Briefly press and hold the c key. You can listen in
to the call. All participants hear a signal tone.
To end: press the end call key a. All participants
hear a signal tone.
If the first internal participant presses the end call
key
a, the handset that has "listened in" remains
connected to the external participant.
Setting the alarm clock
Activating/deactivating the alarm clock
MENU ¢ Alarm Clock ¢ OK ¢ Activation
¢ OK ( = on)
When activated:
¢ Set the wake-up time ¢ OK
When the alarm clock rings, press any key to switch
it off for 24
hours. If the alarm clock is set, the
wake-up icon
9 will appear on the screen and the
wake-up time will be displayed instead of the date.
Setting the wake-up time
MENU ¢ Alarm Clock ¢ OK ¢ Wake-up time ¢ OK
Enter the wake-up time in hours and minutes, then
press
OK.
Please note:
Each additional handset must be registered on
the base station in order for it to work properly!
10
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / main.fm / 21.10.2008
Phone settings
For details on how to make audio settings, see
Menu tree
¢ p. 13.
For details on how to set the system PIN on the
base station, see the Menu tree
¢ p. 14.
Changing the display language
MENU ¢ Settings ¢ OK ¢ Handset ¢ OK
¢ Language ¢ OK ¢ select the language ¢ OK
The current language is indicated by .
If you accidentally choose a language you do not
understand:
MENU ¢ 4 2 1 (press the keys one after the other)
Select the correct language with u and press OK.
Resetting the handset
You can reset individual settings and changes that
you have made. Entries in the directory, the calls
list and the handset's registration to the base sta
-
tion will be retained.
MENU ¢ Settings ¢ OK ¢ Handset ¢ OK
¢ Reset Handset ¢ OK
Cancel the reset with a.
Restoring the base station to the factory
settings
When restoring factory settings:
All handsets are de-registered
Individual settings are reset
All lists are deleted
The system PIN is reset to the original code
0000
Only the date and time are retained.
Software reset
MENU ¢ Settings ¢ OK ¢ Base ¢ OK
¢ Base Reset ¢ OK
Hardware reset
Disconnect the power cord from the base station.
Hold down the registration/paging key
(¢ p. 1)
on the base station while reconnecting the power
cable to the base station. Release the key after
approximately 5 seconds.
Repeater mode
With a repeater you can increase the range of your
base station. You will need to activate repeater
mode
(¢ p. 14). Repeater mode and Eco mode or
Eco mode+ (¢ p. 1) cancel each other out.
Operating the base station on the
PABX
The following settings are only necessary when
your PABX requires them, see the user guide for
your PABX.
When entering the digits, enter them slowly one
after the other.
Changing the dialling mode
MENU ¢ 4 I O 1 1 ¢ The number for the set dial-
ling mode flashes: 0 = touch tone dialling (DTMF);
1 = dial pulsing (DP) ¢ enter number ¢OK.
Setting recall
MENU ¢ 4 I O 1 2 ¢ The number for the current
recall flashes
: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms;
7 = 800 ms ¢ enter number ¢ OK.
Changing pause after line seizure
You can set the length of the pause inserted
between pressing the talk key
c and sending the
phone number.
MENU ¢ 4 I O 1 O ¢ The number for the current
pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.
¢ enter number ¢ OK.
Changing the pause after the recall key
MENU ¢ 4 I O 1 4 ¢ The number for the current
pause length flashes: 1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms ¢ enter number ¢ OK.
11
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / main.fm / 21.10.2008
Appendix
Entering letters/characters
Press the relevant key the number of times indi-
cated.
Briefly press the hash key # to switch from
"Abc" to "123" mode, from "123" to "abc"mode and
from "abc" to "Abc" mode.
Standard characters
1) Space
Specifications
Recommended batteries
Technology: Nickel-metal-hydride (NiMH)
Size: AAA (Micro, HR03)
Voltage: 1.2 V
Capacity: 400–800 mAh
We recommend the following types of battery:
GP 550/700 mAh
Yuasa Phone 700/800 mAh
Peacebay 550/650 mAh
(Valid at the time of going to press)
The handset is supplied with recommended batter-
ies.
Base station power consumption
General specifications
Questions and answers
If you have any queries about the use of your tele-
phone, visit our website at
www.gigaset.com/customercare
for 24-hour support. The table below contains a list
of common problems and possible solutions.
Authorisation
This device is intended for analogue phone lines in
your network.
Country-specific requirements have been taken
into consideration.
We, Gigaset Communications GmbH, declare that
this device meets the essential requirements and
other relevant regulations laid down in Directive
1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity
is available at this Internet address:
www.gigaset.com/docs.
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x
1
1 £ $ ¥ ¤
2
a b c 2 ä á à â ã ç
I
d e f 3 ë é è ê
4
g h i 4 ï í ì î
5
j k l 5
L
m n o 6 ö ñ ó ò ô õ
M
p q r s 7 ß
N
t u v 8 ü ú ù û
O
w x y z 9 ÿ ý æ ø å
Q
. , ? ! 0 + - : ¿ ¡ " ; _
P
* / ( ) < = > %
#
Abc
-->
123
123
-->
abc
# @ \ & §
In standby mode
– Handset in base station
– Handset outside base station
approx. 1.3 W
approx. 1.3 W
During a call approx. 1.5 W
DECT standard is supported
GAP standard is supported
Range up to 300 m outdoors
up to 50 m indoors
Base station power supply 230 V ~/50 Hz
Environmental conditions
in
operation
+5 °C to +45 °C, 20% to
75%
elative humidity
1)
Problem Cause Solution
Nothing
appears in
the
display.
The handset is not
switched on.
The batteries are
flat.
Press the end call
key a for approx.
5
seconds or place
the handset in the
base station.
Charge or replace the
batteries.
No wireless
connection
to
the base
station,
Base
flashes
in the display.
The handset is
outside the range
of the base sta
-
tion.
The handset is not
registered.
The base station is
not turned on.
Move the handset
closer to the base
station.
Register the handset
¢ p. 9.
Check the mains con-
nector on the base
station
¢ p. 3.
You cannot
hear a ringer/
dialling tone
from the fixed
line network.
The phone cord
supplied has not
been used or has
been replaced by
a new cord with
the wrong jack
connections.
Please always use the
phone cord supplied
or ensure that the
pin
connections are
correct when purchas
-
ing from a retailer:
3-4 assignment of
telephone leads/
EURO
CTR37.
Error tone
sounds after
system PIN
prompt.
PIN forgotten.
The system PIN
you have entered
is incorrect.
Reset the system PIN
to the default 0000
¢ p. 10.
All handsets are
de-registered. All
settings are reset.
All lists are deleted.
12
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / main.fm / 21.10.2008
Service (Customer Care)
You can get assistance easily when you have technical questions or questions about how to use your device
by using our online support service on the Internet at:
www.gigaset.com/customercare
This site can be accessed at any time wherever you are. It will give you 24/7 support for all our products. It
also a list of FAQs and answers plus user guides for you to download. You will also find frequently asked
questions and answers in the Questions and Answers section of this user guide in the appendix.
If the device needs to be repaired, please contact one of our Customer Care Centers:
Please have your record of purchase ready when calling.
Replacement or repair services are not offered in countries where our product is not sold by
authorised dealers.
Abu Dhabi. . . . . . . . . . . . .97 12 62 23 800
Argentina . . . . . . . . . . . . . 0800-888-9878
Australia . . . . . . . . . . . . . . . .1300 665 366
Austria . 05 17 07 50 04 (0,065 Euro/Min.)
Bahrain . . . . . . . . . . . . . . .97 31 73 11 173
Belgium . . . . . . . . . . . . . . . . 0 78 15 66 79
Bosnia Herzegovina . . . . . . . .033 276 649
Brazil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Grande Capitais e Regiões Metropolitanas:
. . . . . . . . . . . . . . . . . . . . . . . . . 4003 3020
. . . . . . . . . . . . . . . . . .R$ 0,14 (US$ 0,069)
Demais localidades: . . . . . 0800 888 3020
. . . . . . . . . . . . . . . . . .R$ 0,20 (US$ 0,098)
Bulgaria. . . . . . . . . . . . . . . . . 02 873 94 88
Canada . . . . . . . . . . . . . . . . .866 247 8758
China . . . . 0 21 400 670 6007 (RMB 0.11)
Croatia . . . . . . . . 016 10 53 81 (0,23 Kun)
Czech Republic . . . . . . . . . . . . 233 032 727
Denmark . . . . . . . . . . . . . . . . . 35 25 86 00
Dubai . . . . . . . . . . . . . . . .97 14 39 69 944
Egypt. . . . . . . . . . . . . . . . . . . 202 7623441
Finland . . . . . . . . . . . . . . . . 09 23 11 34 25
France. . . 01 56 38 42 00 (Appel national)
Germany. . . . . . . . . . . . . . .01805 333 222
(0,14 Euro/Min. aus dem Festnetz der Deut-
schen Telekom. Für Anrufe aus den Mobil-
funknetzen können abweichende Preise
gelten)
Greece . . . . . . 801 1000 500 (0,026 Euro)
Hungary . . . . . . . . .06 14 71 24 44 (27 Ft)
India . . . . . . . . . . . . . . .Please refer to your
. . . . . . . . . . . . . . . . . . . local warranty card
Ireland . . . . . . . . . . . . . . . . 18 50 77 72 77
Israel . . . . . . . . . . . . . . . . . . 1 700 700 727
Italy. . . . . . . . . . . . . . . . . . . . 199.15.11.15
Jordan . . . . . . . . . . . 00962 6 5625460/1/2
Kuwait . . . . . . . . . . . . . . . 00965-2464993
Latvia . . . . . . . . . . . . . . . . . . . . . 7 50 11 18
Lebanon. . . . . . . . . . . . . . 00961-1236110
Luxembourg . . . . . . . . . . . 40 66 61 56 40
Malaysia. . . . . . . . . . . . . . . .603 77124304
Malta . . . . . . . . . . . . . . +353 21 4940 632
Mexico . . . . . . . . . . . . . .01 80 07 11 00 03
Netherlands
. . . . . . . . .0900-3333102 (0,25 Euro/min.)
New Zealand . . . . . . . . . . . 08 00 27 43 63
Norway . . . . . . . . . . . . . . . . . . 22 70 84 00
Oman. . . . . . . . . . . . . . . . 96 82 47 09 281
Poland . . . . . . . . . . . . . . . . . 0 801 140 160
Portugal. . . . . . . . . . . . (351) 808 781 223
Romania . . . . . . . . . . . . +4.021.529.7114.
Russia. . . . . . . . . . . . . . . 8 (495) 228 1312
Serbia. . . . . . . . . . . . . . . . . . 0800 222 111
Singapore . . . . . . . . . . . . . . . . 62 27 11 18
Slovak Republic
. . . . . . . . . . . . . 02 59 68 22 66 (4,428 sk)
Slovenija . . . . . . . . . . . . . . . 0 14 74 63 36
South Africa. . . . . . . . . . . . 08 60 10 11 57
Spain . . . . . . . . . . . . . . . . . . . .902 103935
Sweden . . . . . . . . . . . . . . . . . 08 750 99 11
Switzerland
. . . . . . . . . . 0848 212 000 (0,08 SFr./Min.)
Taiwan . . . . . . . . . . . . . . . . 02 23 96 10 06
Thailand. . . . . . . . . . . . . . . . . 02 722 1118
Turkey . . . . . . . . . . . . . . . .0216 459 98 59
Ukraine . . . . . . . . . . . .+380-44-451-71-72
United Arab Emirates . . . . . 0 43 66 03 86
United Kingdom . . . . . . . 0 84 53 67 08 12
USA . . . . . . . . . . . . . . . . . 1-866 247-8758
. . . . . . . . . . . . . . . . . . . . . . . . . . . (toll free)
13
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / main.fm / 21.10.2008
Menu tree
Your phone has an extensive range of features.
These are offered in the form of menus.
To select a function while the phone is in idle sta-
tus, press MENU (open menu), use the t and
v keys to scroll to the function you require and
press
OK to confirm.
To return to idle status: press and hold the
a key.
As an alternative to selecting functions using the
t and v buttons, you can also enter the digit
combination that is in front of the function in the
menu tree.
For setting the time and date, for example:
MENU ¢ 4 1 ¢ OK
1 Alarm Clock
1-1 Activation Activating/deactivating the alarm clock
1-2 Wake-up time Input format: HHMM
2 Audio Settings
2-1 Handset Volume Can be set to one of 3 levels
2-2 Ringer Volume 5 levels + "crescendo" available
2-3 Ringer Melody 2-3-1 External Calls 10 ringer tones available for external calls
2-3-2 Internal Calls 10 ringer tones available for internal calls
2-3-3 Alarm Clock 10 ringer tones available for alarm clock
2-4 Advis. Tones During a conversation
2-5 Battery Low 2-5-1 Off Warning tone to indicate
battery is almost flat:
never
2-5-2 On always
2-5-3 During Call only during a call
3 Voice Mail
3-1 Set Key 1
(all devices)
3-1-1 Netw. Mailbx Assign key 1 with network mailbox and enter the network mailbox
number (in idle status, press and hold key
1 to dial).
Netw. Mailbx: your network provider's answer machine; must be
requested separately. The network mailbox list can be displayed if
your network provider supports this function and if key
1 has been
assigned with the network mailbox.
14
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / main.fm / 21.10.2008
4 Settings
4-1 Date/Time Enter date (DDMMYY format), then time (HHMM format)
4-2 Handset 4-2-1 Language Set the display language ¢ p. 10
4-2-2 Auto Answer Automatically activate/deactivate auto answer ¢ p. 7
4-2-3 Register HS Manually register the handset ¢ p. 9
4-2-4 Reset Handset Reset the handset ¢ p. 10
4-3 Base 4-3-2 Call list type 4-3-2-1 Missed Calls ¢ p. 8
4-3-2-2 All Calls ¢ p. 8
4-3-3 System PIN Change system PIN (default is 0000)
4-3-4 Base Reset Restore factory settings ¢ p. 10
4-3-5 Additional 4-3-5-1 Repeater Activating/deactivating ¢ p. 10
4-3-5-2 Eco Mode+ Activating/deactivating ¢ p. 2
4-3-5-3 Eco Mode Activating/deactivating ¢ p. 2
4-3-6 Listening in Activate/deactivate the function ¢ p. 9
4-3-7 Preselection 4-3-7-1 Presel. Number Network provider dialling code,
should be inserted automatically
before the dialled phone number.
4-3-7-2 With Preselect First digits of the dialling codes,
should be dialled with preselection.
4-3-7-3 Without Presel First digits of dialling codes, should
be dialled without preselection.
15
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / main.fm / 21.10.2008
16
AL180 / IM-NORD EN / A31008-M2003-R201-1-9W19 / main.fm / 21.10.2008
Issued by
Gigaset Communications GmbH
Schlavenhorst 66
D-46395 Bocholt
Gigaset Communications GmbH is a trademark
licensee of Siemens AG
© Gigaset Communications GmbH 2008
All rights reserved. Subject to availability.
Rights of modification reserved.
www.gigaset.com
A31008- M2003- R201- 1- 9W19
This user guide is made from 100% recycled paper.
Version: 30.10.2008
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Siemens-AL180

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens AL180 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens AL180 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Siemens AL180

Siemens AL180 Gebruiksaanwijzing - Nederlands - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info