521718
8
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
CM2N3204E / 1.1999 Siemens Building Technologies
8/20 Landis & Staefa Division
In plants that use chilled water cooling coils/chillers:
- continuous checkback signals on the operational status of the plant and on the
status of the chilled water circulator or chiller, based on the signals received from
supervisory elements such as flow switch and overload protection
- switching on and off depending on the selected alarm priority («A» or «b»)
The RWI65.02 is able to acquire and handle seven fault status signals from plant
elements and statuses. The faults are indicated on the two lines at the bottom (lines 9
and 10) of the display when the front door is closed.
I,II
E6E4
E1
E2
E5
B9
E3
p
!
10
9
A 0 b 0
3204Z01
1 2 0
1234
657
1 Supervision of risk of frost (signal input B9)
Display: 0 = normal, «A» or «b» = frost alarm
2 Supervision of air flow (signal input E2)
Display: 0 = normal, 1 = start phase, «A» or «b» = faulty flow
3 Overload of chiller or chilled water circulator (signal input E4)
Display: 0 = Q13/Q24 cooling deactivated, 1 = Q13/Q24 cooling activated,
«A» or «b» = cooling at fault
4 Freely available, e.g. for filter supervision (signal input E6)
Display: 0 = normal, 1 = start phase, «A» or «b» = fault at E6
5 Overload/overtemperature at hot water circulator or electric heater battery (signal input E3)
Display: 0 = Q13/Q14 heating deactivated, 1 = Q13/Q14 heating activated,
«A» or «b» = pump or electric heater battery at fault
6 Overload of fan (signal input E5)
Display: 0 = Q33/Q34/Q44 fans deactivated, 1 = Q33/Q34 fan speed I activated,
2 = Q33/Q44 fan speed II activated, «A» or «b» = fan at fault
7 Supervision of fire/smoke (signal input E1)
Display: 0 = normal, «A» or «b» = fire/smoke alarm
Depending on the priority, fault status signals are indicated by a flashing «A» or «b»
in the display and by a flashing red LED located in the acknowledge button on the unit
front. Depending on the priority coding of contact output F91 («A» and «b» or «A» or
«b»), the fault status signal can also be passed on to F91 as a common fault status
signal.
For each status input, the priority of the fault status signal («A» or «b») can be selected.
Each of the status inputs E1 through E6 can be matched to the type of contact of the
respective signal element (N.O. or N.C. contact).
For status inputs E2 and E6, it is also possible to choose alarm delays to prevent false
alarms.
When a fault is indicated, it can be acknowledged with the acknowledge button located
on the unit front. In that case, the priority indication in the display and the red LED in the
button change from flash light to steady light. The indications extinguish when the fault
status signal is no longer present at the status input, belongs to priority «b», and there
are no other fault status signals present.
If it is a fault status signal of priority «A», the steady light is maintained as long as a fault
status signal of that priority is present. If there is no more fault status signal present, the
alarm status can be cleared by pressing the acknowledge button again.
For the effects of the fault status signals at the outputs of the RWI65.02, refer to the
function flow diagrams on the last page of this data sheet.
Fault status signals and
signalling
Acknowledging the fault
status signal
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens AEROGYR RWI65.02 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens AEROGYR RWI65.02 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Siemens AEROGYR RWI65.02

Siemens AEROGYR RWI65.02 Gebruiksaanwijzing en installatiehandleiding - Nederlands - 73 pagina's

Siemens AEROGYR RWI65.02 Gebruiksaanwijzing - Deutsch - 50 pagina's

Siemens AEROGYR RWI65.02 Gebruiksaanwijzing - Français - 22 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info