600320
15
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
Care & Maintenance
Wheels and Tyres (GK10only)
The wheels of your Shoprider® scooter have split rims. This allows any
punctures to be repaired easily. To change the wheels remove the center 13 mm
bolt and slide the wheel off its axle. Take care not to lose the drive key on the
rear wheels. When changing a tyre you must deflate the tyre first. Remove the
four bolts to split the rim if required. Ensure that when refitting the wheel the
retaining bolt is fitted with a locking washer (with drive key for the rear wheel).
Tyre pressure is recommended to be kept at 30 psi on the rear tyres and 25 psi
on the front. Note when refitting the tube a small amount of air in the tube will
prevent the tube from pinching when reassembling the split rim.
CAUTION: On the tyre it states maximum tyre pressure is 50psi. This is a
maximum tyre pressure and the tyres should never be inflated to this
pressure.
ATTENTION: Tyres should be maintained at the correct pressure noted
above to ensure even wear and ride comfort.
Wheels and Tyres (QT3, QT4 & GK9)
These scooter have polyurethane tyres fitted and they require no regular
maintenance
Cleaning
Your Shoprider® scooter can be cleaned as required however as with all
electrical equipment you must ensure that extreme care is used to not water
damage any sensitive parts.
Please read the following warnings:
Only use a soft damp cloth.
NEVER use a hose to wash your scooter.
DO NOT use abrasive cleaning products ± Mild detergent only should be used.
General Scooter Maintenance
Every six months check the tiller base bolts, wheel axle bolts, and arm rest angle
adjustment bolts and tighten as necessary.
Also check the seat and arm rest tightening knobs and tighten as needed. If your
scooter is fitted with authorised Shoprider® accessories please check these to
ensure the tightening knobs and bolts are secure.
Lubrication
Approximately every six months you should lubricate the following parts on
your Shoprider®.
The lubrication points are as follows:
Seat post only.
The suggested lubricants should be done with light grade of grease.
Please note: The breather hole on top of the Transaxle is NOT a grease nipple.
PLEASE NOTE ANY OTHER LUBRICATION MUST BE COMPLETED
BY AN AUTHORSED SHOPRIDER® DEALER
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Shoprider QT3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Shoprider QT3 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info