18
Notes:
• To play a MP3/WMA/JPEG/DivX disc with the various playback modes, select the desired playback mode.(For details, refer to
“Repeating a file, folder” on page 25.)
• Some discs/files recorded in DVD Video, MP3, WMA, JPEG or DivX, etc. cannot be played due to incomplete disc finalization,
recording quality or physical condition of the disc, characteristics of recording device or authoring software, etc.
• The DVDs continue to rotate while the menu display appears. When no further selections are to be played, be sure to press
the STOP() button repeatedly to enter the stop mode and to clear the menu display.
• A TV screen may be burned out if a static picture is displayed for a long time in the stop mode. To prevent this, set the
SCREEN SAVER to ON (refer to “When selecting the SCREEN SAVER” on page 46). Then, the unit automatically activates
the screen saver function if a static picture, etc. is displayed for over 5 minutes.
Pressing any button will cancel the screen saver function and return to the previous display.
• When you press a button, if the corresponding operation is prohibited by the unit or the disc, appears on your TV screen.
• When selecting the preferred file, playback starts from the
selected file.
• When selecting the preferred folder, the file menu screen
of the selected folder is displayed. In this case, repeat this
step to select the preferred file in its file menu.
Press the CURSOR ▲/▼ buttons to select the preferred folder or file then press the ENTER button.
2
To select a playback area / layer
• Some SACDs consist of 2 channel and multichannel audio areas, and hybrid SACDs comprise 2 layer structure of an
HD(SACD) layer and CD layer. You can select the desired area/layer to be played. (For details, see the disc’s sleeve notes.)
• This operation works only with SACDs on which 2 areas or/and 2 layers are recorded.
Therefore, when the disc does not contain the preferred channel area or CD layer, you cannot select it.
• You can set the SACD area to the desired at initial settings, too.(For details, refer to “When selecting the SACD AREA” on
page 43.)
• In the stop mode
• Each time this button is pressed, the playback area/layer changes and is
displayed on the TV screen for several seconds as follows :
MULTI CHANNEL MODE : When playing the multichannel area(of HD layer.)
TWO CHANNEL MODE : When playing the 2 channel area(of HD layer.)
CD LAYER : When playing the CD layer.
• After selecting the preferred area or the CD layer, press the PLAY(▶) button
to play the selected.
• Each time the layer changes from HD(SACD) layer to CD layer and vice
versa, it takes several seconds and CHANGE LAYER is displayed.