618049
13
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
13
Wisdom 3 DC Manual
© 2002 Design, 2011 Doc. No. 12-5274-r01 (8/31/11)
PSI
TIME
NITROX
O2
N2
SURFACE
PSI
TIME
NITROX
SURFACE
PSI
TIME
NITROX
SURFACE
PSI
TIME
NITROX
SURFACE
PSI
BAR
FEET
TIME
-STOP
DIVE
FEET
METERS
MAXIMUM
DESAT
TOTAL ASCENT
NITROX
AIR
GAUGE
CNS
O2
DECO
N2
FO2%
SAFE
MINUTES
METERS
SURFACE
L
O
W
ACTIVATION
PUSH BUTTON (PRIMARY METHOD)
A momentary press of the front (Advance) button activates the Wisdom 3.
The Wisdom 3 will automatically turn OFF 2 hours after activation if no dive is made. If the water activation
contacts are still bridged (the unit is wet), it automatically reactivates.
WATER CONTACT (BACKUP METHOD)
NOTE: This method functions only when the Wet Activation feature is set ON.
The Wisdom 3 has 2 contacts that cause it to activate when the space between the contacts is bridged by a
conductive material (e.g., water contact) and enter WET Mode (Fig. 9A) or DIVE Mode.
Upon removing the bridge between the contacts (drying the unit), the alpha graphic TIME replaces the graph-
ic WET (Fig. 9B).
If the contacts are still bridged 2 hours after a dive, the alpha graphic WET appears together with the graphic
FLY:SAT and the Time to Fly and Desaturation countdown timers.
Upon drying the unit, the graphic WET is replaced with the graphic TIME.
DIAGNOSTIC MODE (ONLY IF MANUALLY ACTIVATED)
Immediately following manual (push button) activation, the Wisdom 3 lights all segments of the LCD and
initiates a countdown sequence (Fig. 10). Following the countdown sequence (from 8, -, 9, 8, 7, 6, 5, 4, 3, 2,
1, 0) which takes about 2 seconds, it veries that sensor readings and battery voltage are within tolerance. If
values are satisfactory, it enters Surface Mode displaying the TIME screen.
When the front (Advance) button is held depressed and as the Diagnostic countdown reaches 00, a Serial
Number screen appears displaying the unit’s Serial Number and rmware code Revision Number as long as
the button is held depressed (Fig. 11). Upon releasing the button, the unit shuts Off.
Once the dive computer is activated, regardless of what mode it is in, it automatically reverts to DIVE MODE
upon descent to 5 FT (1.5 M).
SURFACE SCREENS
TIME SCREEN
The TIME screen appears immediately following diagnostics (if manually activated) on a new day, or re-
activation in FLY/DESAT MODE.
If the unit is wet, the alpha graphic WET replaces the alpha graphic TIME. Once the unit is dry, the WET
graphic is replaced by the TIME graphic.
The graphic TIME (or WET) ashes during the rst 10 minutes after a dive.
TIME/WET SCREENS (Fig. 12/13)
Appearing on the display are -
Alpha graphic TIME, or WET
• Date (month and day)
• Elapsed surface time (or time since activation if no dive made yet that day) and graphic Surface
• Operating Mode graphic (Nitrox, Air, or Gauge)
• Time of Day (hours:minutes )
• Cylinder Pressure and graphic (PSI or BAR)
• NiBG and O2BG, if any
• Battery icon (if Low Battery Condition)
Pressing the Both buttons simultaneously for less than 2 seconds activates the Backlight.
Pressing the front (Advance) button accesses the DATA screen.
Fig. 10 - Diagnostics
Fig. 11 - Serial No.
Fig. 12 - Time
Fig. 13 - Wet
Fig. 9A - Unit Wet
Fig. 9B - Unit Dry
N
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sherwood Wisdom 3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sherwood Wisdom 3 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info